2017 CITROEN C-ELYSÉE Owners Manual

04
199
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Press SRC/TEL several times in succession  and   select   radio.
Press BAND
 

to   select   a   waveband. Press LIST
 

to   display   the   list   of   stations  
received

  in   alphabetical   order.
A
 
press   changes   to   the   next   or   previous  
letter

  (e.g.  
A,
  B,   D,   F,   G,   J,   K,   ...).
Radio
Select the desired radio station by turning  the   control   knob   and   confirm   by  
pressing.
Selecting a station
A
 
long   press   on  
LIST 
builds   or   updates  
the

  list   of   stations;   audio   reception   is   cut  
momentarily

.
The
 
exterior
 
environment
 
(hills,
 
buildings,
 
tunnel,
 
car
 
park,
 
below
 
ground...)

 
may
 
prevent
 
reception,
 
even
 
in
 
RDS
 
station
 
tracking
 
mode.

 
This

 
phenomenon
 
is
 
normal
 
in
 
the
 
propagation
 
of
 
radio
 
waves

 
and
 
is
 
in
 
no
 
way
 
indicative
 
of
 
a
 
fault
 
with
 
the
 
audio
 
system.

04
TA
200
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   country   as   radio   stations   do   not   cover  
100

  %   of   the   territory.  
This
  explains   the   loss   of   reception   of   the  
station

  during   a   journey.
AUDIO
RDS Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic  
report

  is   transmitted,   the   current   audio   source   (Radio,   CD,  
USB,

  ...)   is   interrupted   automatically   to   play   the  
T
A
 
message.  
Normal

  playback   of   the   audio   source   resumes   at   the   end   of   the  
transmission

  of   the   message.
Press TA
 

to   activate   or   deactivate   the  
reception

  of   traffic   messages.
When
 
the
 
radio
 
is
 
displayed
 
on
 
the
 
screen,

 
press
 
the
 
control
 
knob
 
to
 
display
 
the

 
contextual
 
menu.
Select "RDS"
 
and
 
confirm
 
to
 
save.
"RDS"
 
is
 
displayed
 
in
 
the
 
screen.

04
201
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Radio text is information transmitted by the radio station related to the  current   programme   or   song.
With
  the   radio   displayed   on   the   screen,  
press

  the   control   knob   to   display   the  
contextual

  menu.
Turn
  the   control   knob   to   select   "RADIO
TEXT"
  then   press   to   confirm.
Display RADIO TEXT
Screen C

04
202
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Audio CD
Insert 12 cm diameter circular compact discs only.
Some   anti-pirating   systems,   on   original   discs   or   CDs   copied   using   a  
personal

  recorder,   may   cause   faults   which   are   no   reflection   on   the  
quality

  of   the   original   player.
Without
  pressing   the   EJECT button, insert a CD in the player, play
begins
  automatically.
To
  play   a   disc   which   has   already   been  
inserted,

  press   the   SRC/TEL button
several
  times   in   succession   and  
select

"CD".
Press one of the buttons to select a
track
  on   the   CD.
Playing a CD
Press LIST  to   display   the   list   of   tracks  
on

  the   CD.
Press
  and   hold   one   of   the   buttons   for  
fast

  forward   or   backward.

04
203
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
CD, USB
Information and adviceOn   a   single   disc,   the   CD   player   can   read   up   to   255   MP3   files   spread  
over

  8   directory   levels.   However,   it   is   recommended   that   this   be   kept  
to

  2   levels   so   as   to   limit   the   time   taken   to   access   and   play   the   CD.
During
  play,   the   folder   structure   is   not   observed.
In
  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   standards   ISO   9660   level   1.2   or   Joliet.
If
  the   disc   is   recorded   in   another   format,   it   may   not   be   played   correctly.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.
Do

  not   connect   a   hard   disk   or   USB   device   other   than   audio   players   to  
the

  USB   port.  
This
  may   cause   damage   to   your   installation.
The
  audio   system   will   only   play   files   with   extension   ".mp3"   or   ".wma"  
and

  a   compression   rate   that   is   constant   or   variable   between   32   Kbps  
and

  320   Kbps.
It
  is   advisable   to   restrict   file   names   to   20   characters   without   using  
special

  characters   (e.g.   "   ?   ;   ù)   to   avoid   any   playing   or   displaying  
problems.
The

  playlists   accepted   are   types   .m3u   and   .pls.
The
  number   of   files   is   limited   to   5   000   in   500   directories   on   a  
maximum

  of   8   levels.

04
204
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
CD, USB
AUDIO
Playing a compilationInsert   an   MP3   compilation   in   the   CD   player  
or

  connect   a   memory   stick   to   the   USB   port,  
directly

  or   via   an   extension   lead.
The
  system   creates   playlists   (temporary   memory)   the   creation   time  
for

  which   can   take   from   a   few   seconds   to   several   minutes.
The
  playlists   are   updated   every   time   the   ignition   is   switched   off   or   a  
USB

  memory   stick   is   connected.
Play
  starts   automatically   after   a   period   which   depends   on   the  
capacity

  of   the   USB   memory   stick.
Use
  only   USB   memory   sticks   formatted   FAT32   (File  
Allocation
 
T
able).
At
  a   first   connection,   the   order   suggested   is   by   folder.  
When

  connecting   again,   the   order   previously   chosen   is  
retained.T

o   play   a   disc   or   memory   stick   which  
has

  already   been   inserted,   press  
SRC
/
TEL
  several   times   in   succession   and  
select "

CD" or "USB". Turn
  the   control   knob   to   select   the   next  
or

  previous   track.
Press one of the buttons to select the
next
  or   previous   folder   in   the   order  
chosen.
Press

  and   hold   one   of   the   buttons   for  
fast

  forwards   or   backwards.
Press LIST
 

to   display   the   menu   of  
folders

  in   the   compilation.

04
BACK
205
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
Select a line in the list.
Select   a   track   or   a   folder.
Skip
  a   track.
Up
  a   level   in   the   menu.
AUDIO
USB memory stick - File classification
Having selected the desired classification 
(" By folders", "By artists", "By genres",
"By playlists")
  press   the   control   knob.
Then
  press   the   control   knob   to   confirm   and  
save

  the   modifications.
-
 
By folders
:   all   folders   containing   audio  
files

  recognised   on   the   peripheral   device,  
in

  alphabetical   order   without   following   the  
folder

  structure.
-
 
By artists :

  all   of   the   artist   names   defined  
in

  the   ID3  
T
ags,   in   alphabetical   order.
-
 
By genres
:   all   of   the   genres   defined   in   the  
ID3

 
T
ags.
-
 
By playlists
:   if   playlists   have   been   saved.
Make
  a   long   press   on  
LIST or press
MENU
, select "Multimedia", then
"Media parameters "   and   finally   "
Choice
of track listing "   to   display   the   different  
classifications.

04
206
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
APPLE® players or portable player
Management of the device is via the audio system controls.
The   audio   files   on   a   Mass   Storage   portable   player*   can  
be

  heard   through   the   vehicle's   speakers   by   connecting  
it

  to   the   USB   port   (cable   not   supplied).
If   the   portable   player   is   not   recognised   by   the   USB   port,   connect   it   to  
the

  auxiliary   Jack   socket. The Apple
® player must be updated regularly for the best connection.
The
 
playlists   are   those   defined   in   the  
Apple® player.
The Apple
® player must be generation 5 or later.
*
 
Check
 
your
 
player's
 
manual.