2016 NISSAN NOTE navigation system

AV
NAVIGATION SYSTEMAV-165
< WIRING DIAGRAM > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
AANIA4158GB
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-166
< WIRING DIAGRAM >[NAVIGATION]
NAVIGATION SYSTEM
ABNIA8075GB
Revision: August 2015
2016 Versa Note

cardiagn.com

AV
NAVIGATION SYSTEMAV-167
< WIRING DIAGRAM > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
ABNIA8076GB
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-168
< WIRING DIAGRAM >[NAVIGATION]
NAVIGATION SYSTEM
ABNIA8077GB
Revision: August 2015
2016 Versa Note

cardiagn.com

AV
NAVIGATION SYSTEMAV-169
< WIRING DIAGRAM > [NAVIGATION]
C
D
E
F
G H
I
J
K L
M B A
O P
ABNIA7675GB
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-170
< WIRING DIAGRAM >[NAVIGATION]
NAVIGATION SYSTEM
ABNIA8078GB
Revision: August 2015
2016 Versa Note

cardiagn.com

AV-172
< BASIC INSPECTION >[NAVIGATION]
DIAGNOSIS AND REPAIR WORKFLOW
2. Depending on system being diagnosed, perform Self Diagnostic Result for:
-MULTI AV.
-AVM.
Are any DTCs displayed?
YES >> Refer to AV-151, "DTC Index" (MULTI AV) or
AV-154, "DTC Index" (AVM).
NO >> GO TO 4.
4.PERFORM SYMPTOM DIAGNOSIS
Refer to AV-228, "
Symptom Table".
>> GO TO 5
5.FINAL CHECK
Refer to symptom described by the customer in step 1.
Is the symptom still present?
YES >> GO TO 2
NO >> Inspection End.
Revision: August 2015 2016 Versa Note

cardiagn.com

AV-176
< BASIC INSPECTION >[NAVIGATION]
INSPECTION AND ADJUSTMENT
4.OPERATION CHECK
Confirm that each function controlled by AV control unit operates normally.
>> Work End.
CONFIGURATION (AV CONTROL UNIT) : Configuration ListINFOID:0000000012433030
CAUTION:
Thoroughly read and understand the vehicle specifi cation. Incorrect settings may result in abnormal
control of ECU.
⇔ : Items which confirm vehicle specifications
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT)
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Description
INFOID:0000000012433031
Vehicle specification needs to be written with CONSULT because it is not written after replacing around view
monitor control unit.
Configuration has three functions as follows:
CAUTION:
• When replacing around view moni tor control unit, you must perform “Select Saved Data List” or
"After Replace ECU" with CONSULT.
• Complete the procedure of “Select Saved Da ta List” or "After Replace ECU" in order.
• If you set incorrect “Select Saved Data List” or "After Replace ECU", incidents might occur.
• Configuration is different for each vehicle mode l. Confirm configuration of each vehicle model.
• Never perform “Select Saved Data List” or "After Replace ECU" except for new around view monitor
control unit.
CONFIGURATION (AROUND VI EW MONITOR CONTROL UNIT) : Work Procedure
INFOID:0000000012433032
1.WRITING MODE SELECTION
CONSULT
Select “Reprogramming, Configuration” of around view monitor control unit.
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
2.PERFORM “SAVED DATA LIST”
CONSULT
Automatically “Operation Log Selection” window will display if “Before Replace ECU” was performed. Select
applicable file from the “Save Data List” and press “Confirm”.
>> Work End.
MANUAL SETTING ITEM
Items Setting value
SOUND SYSTEM BASE ⇔ BOSE
CAMERA SYSTEM NONE/AVM ⇔ REAR CAMERA
Function Description
"Before Replace ECU" • Reads the vehicle configuration of current around view monitor control unit.
• Saves the read vehicle configuration.
"After Replace ECU" Writes the vehicle configuration with manual selection.
"Select Saved Data List" Writes the vehicle configuration with saved data.
Revision: August 2015 2016 Versa Note

cardiagn.com