2016 HONDA CR-Z navigation

96
uuEntering a Destination uIntersection
Navigation
Intersection
H HOME uNavi uMENU uMore Search Methods uIntersection
Select the intersection of two streets as th e destination. The state or province for
your current location is displayed at the left side of the screen (e.g., CALIFORNIA).
1.Select the intersection search
method.
2. Set the route to your destination.
2 Calculating the Route P. 100
The following items are available:
•City : Selects the city where the intersection is located. You are prompted to enter
the name of the two in tersecting streets.
2Selecting a City P. 86
•Street : Selects the two intersecting streets. The city or cities that the streets are
located in are displayed.
2 Selecting a Street P. 87
•Change State : Selects the state or province.
2Selecting the State or Province P. 85
1Intersection
It is usually easier to select Street to find the streets
first. The city or cities that the streets are in will be
displayed. If you select City and your city is not listed,
it may be part of a larg er metropolitan area. Try
entering the street first.
If the intersection is outside the state you are
currently in, select Change State.
2 Selecting the State or Province P. 85
On Canadian models, Change Province is displayed
instead of Change State .
If there is more than one intersection, you are
prompted to select the intersection. If the two streets
that you have selected do not intersect, no
intersection is entered.
16 CR-Z NAVI-31SZT8500.book 96 ページ ２０１５年７月３０日　木曜日　午前９時１８分

97
uuEntering a Destination uCoordinate
Navigation
Coordinate
H HOME uNavi uMENU uMore Search Methods uCoordinate
Specify a location using latitude and longitude map coordinates. 1.Enter the latitude. Select OK.
2. Enter the longitude. Select OK.
3. Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary.
u If the address is not the desired
location, scroll to another
location and try again.
4. Select an icon from the right side
of the screen to display the route
calculation menu.
2 Calculating the Route P. 100
5.Select Set as Destination .
1Coordinate
Latitude and longitude must be entered up to the
seconds’ value.
Place/landmark icons are displayed at 1/8 mile (200 m)
or less. Roads are displayed at 1/4 mile (400 m) or less.
If you select multiple icon s within the cursor radius,
you are prompted to select one of the items from a
list.
2 Selecting a Destination on the Map P. 123
16 CR-Z NAVI-31SZT8500.book 97 ページ ２０１５年７月３０日　木曜日　午前９時１８分

98
uuEntering a Destination uMap Input
Navigation
Map Input
H HOME uNavi uMENU uMore Search Methods uMap Input
Scroll and select an icon on the map screen as the destination.
You are prompted to define the map area to display.
1.Select an item.
The following items are available:
• Current Position : Your current position is centered on the map.
• State : You are prompted to select the state or province.
2Selecting the State or Province P. 85
•City : You are prompted to enter the city name.
2Selecting a City P. 86
1Map Input
On Canadian models, Province is displayed instead
of State .
16 CR-Z NAVI-31SZT8500.book 98 ページ ２０１５年７月３０日　木曜日　午前９時１８分

99
uuEntering a Destination uMap Input
Navigation
2. Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary.
u If the address is not the desired
location, scroll the map to
another location and try again.
3. Select an icon from the right side
of the screen to display the route
calculation menu.
2 Calculating the Route P. 100
4.Select Set as Destination .
1Map Input
Place/landmark icons are displayed at 1/8 mile (200 m)
or less. Roads are displayed at 1/4 mile (400 m) or less.
If you select multiple icon s within the cursor radius,
you are prompted to select one of the items from a
list.
2 Selecting a Destination on the Map P. 123
16 CR-Z NAVI-31SZT8500.book 99 ページ ２０１５年７月３０日　木曜日　午前９時１８分

100
Navigation
Calculating the Route
This section describes how to calculate your route.1.Select Set as Destination .
u The system calculates and
displays the route line on the
map screen.
2 Route Line P. 104
The following items are available:
•View Routes: Displays three different routes.
2 Viewing the Routes P. 101
•Route Preference : Changes the route preferen ces (calculating method).
2Route Preference P. 41
2.Follow the route guidance to your
destination.
2 Driving to Your Destination
P. 102
u The system provides you with
pop-up messages if your route
passes through unverified
areas, avoid areas, or areas with
traffic restrictions.
1Calculating the Route
You cannot use voice commands while the system is
calculating the route.
Search Nearby
You can find the nearest place/landmark (e.g.,
nearest gas station) by specifying a category. 2 Find Nearest Place P. 122
Call
You can place a telephone call to the destination
phone number.
2 Bluetooth ® HandsFreeLink ® P. 166
Address Book
You can add the destinati on address to the address
book. 2 Adding an Address Book Entry P. 31
Edit/Delete Entry
You can edit or delete the address book entry.
2 Editing an Address Book Entry P. 33
Edit Home Entry
You can edit your home address entry. 2 Storing Your Home Address P. 13
16 CR-Z NAVI-31SZT8500.book 100 ページ ２０１５年７月３０日　木曜日　午前９時１８分

101
uuCalculating the Route uViewing the Routes
Navigation
Viewing the Routes
View three different routes to your destination.
1.Select a route on the list.
u The travel distance and
estimated travel time is
displayed for each route.
u The system calculates and
displays the route line on the
map screen.
2 Route Line P. 104
2.Select OK.
1Viewing the Routes
It is not unusual for some ca lculated route options to
be identical.
16 CR-Z NAVI-31SZT8500.book 101 ページ ２０１５年７月３０日　木曜日　午前９時１８分

102
Navigation
Driving to Your Destination
This section describes how to follow the route guidance to your destination, receive
traffic information, and choose the icons displayed on the map screen.
Viewing the Route
After calculating the route to your
destination, the route is displayed on
the map screen.
2 During Route Guidance P. 12
As you drive, the system tracks your
position on the map in real time and
provides guidance as you approach
each guidance point on the route.
■Map Screen
1
Viewing the Route
“Display Map ”
You can change the map scale using voice control
commands (e.g., say “ Display 2 mile scale”).
2 Map Scale Commands P. 233
You can also change the ma p scale by selecting the
scale icon, pinching in/out, and double tapping on
the map screen with two fingers (zoom out only).
You can control the icons displayed on the map
screen using voice control commands (e.g., say
“Display post office ”).
2 Map Display Commands P. 232
You can obtain information about the route using
voice control commands (e.g., say “ How long to
the destination?”). 2 Route Commands P. 234
If you scroll the map whil e en route, the time and
distance to destination indi cators are hidden, and an
indicator showing distance from the current vehicle
position is displayed at the bottom of the screen.
16 CR-Z NAVI-31SZT8500.book 102 ページ ２０１５年７月３０日　木曜日　午前９時１８分

Continued103
uuDriving to Your Destination uViewing the Route
Navigation
The guidance screen offers an al ternative way to view your route.
uThe next guidance point is
displayed as you approach each
guidance point on the route.
u You can also view a list of
guidance directions.
2 Directions P. 109
■Guidance Screen1
Guidance Screen
A visual guide helps you check the guidance screen.
2 Guidance Screen P. 12
16 CR-Z NAVI-31SZT8500.book 103 ページ ２０１５年７月３０日　木曜日　午前９時１８分