Page 249 of 450

247
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for details of the interval for this operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
The
brake fluid level should be close
t
o the "MA X" mark. If it is not, check
t
he brake pad wear.
After
topping
up
the
oil,
the
check
when
s
witching
on
the
ignition
with
the
oil
level
i
ndicator
in
the
instrument
panel
is
not
valid
d
uring
the
30
minutes
after
topping
up.
Topping up the engine oil level
Refer to the "Petrol engine" or "Diesel engine" s ection for the location of the oil filler cap in the
engine
compartment of your vehicle.
F
U
nscrew the oil filler cap to reveal the filler
aperture.
F
A
dd oil in small quantities, avoiding any
s
pills on engine components (risk of fire).
F
W
ait a few minutes before checking the
l
evel again using the dipstick.
F
A
dd more oil if necessary.
F
A
fter checking the level, carefully refit the
o
il filler cap and the dipstick in its tube.
Engine oil change
Refer to the manufacturer's service schedule for details of the interval for this operation.
In
order to maintain the reliability of the engine
a
nd emission control system, never use
a
dditives in the engine oil.
Checks
Page 250 of 450

Fluid specification
The coolant must conform to the manufacturer's r ecommendations.
Coolant level
The coolant level should be close to the "MA X" mark but should never
e
xceed it.
In
addition, as the cooling system is
p
ressurised, wait at least one hour after
s
witching
off the engine before carrying out any
wo
rk.
To
avoid
any risk of scalding, unscrew the cap
b
y
two
turns to allow the pressure to drop.
W
hen
the
pressure has dropped, remove the
c
ap
and
top up the level.
When
the
engine is warm, the temperature of
t
he
coolant is regulated by the fan.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
Screenwash fluid level
Fluid specification
For optimum cleaning and to avoid freezing, t his fluid must not be topped up or replaced
w
ith plain water.
In
w
intry
c
onditions,
i
t
i
s
r
ecommended
t
hat
y
ou
u
se an ethyl alcohol or methanol based fluid.
Top
up the level when necessary.
Page 251 of 450
249
diesel additive level (diesel
engine with particle filter)
To p p i n g u p
This additive must be topped up by a CITROËN d
ealer or a qualified workshop without delay.
Used products
Avoid prolonged contact of used oil or fluids with the skin.
Most
of these fluids are harmful to
h
ealth or indeed very corrosive.
Do
not discard used oil or fluids into
s
ewers or onto the ground.
Take
used oil to a CITROËN dealer or
a
qualified workshop (France) or to an
a
uthorised waste disposal site.
The
additive
reservoir
low
level
is
i
ndicated
by
fixed
illumination
of
t
his
warning
lamp,
accompanied
by
an
audible
w
arning
and
a
message
in
the
multifunction
sc
reen.
Checks
Page 252 of 450

Checks
12 V batteryAir filter and passenger compartment filter
Oil filterParticle filter (
di
esel)
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise, have them checked by a CITROËN dealer or a qualified workshop.
The battery does not require any maintenance.
H owever, check that the terminals are clean a
nd correctly tightened, particularly in summer
a
nd winter.Refer to the manufacturer's service schedule for details of the
r
eplacement intervals for these
c
omponents.
Replace
the oil filter each time the
e
ngine oil is changed.
Refer
to the manufacturer's
s
ervice schedule for details of
t
he replacement interval for this
c
omponent.
The presence of this label, in particular with
the
Stop
&
Start
system,
indicates
the
use
of
a
specific
12
V
lead-acid
battery
with
special
t
echnology
and
specification.
The
involvement
o
f
a
CITROËN
dealer
or
a
qualified
workshop
i
s
essential
when
replacing
or
disconnecting
t
he
battery. The start of saturation of the
particle
filter is indicated by the
t
emporary illumination of this warning lamp
a
ccompanied by a message in the multifunction
sc
reen.
As
soon as the traffic conditions permit,
r
egenerate the filter by driving at a speed of at
l
east 40 mph (60 km/h) until the warning lamp
g
oes off.
If
the warning lamp stays on, this indicates a
l
ow additive level.
On a new vehicle, the first particle
filter
regeneration operations may be
a
ccompanied by a "burning" smell,
w
hich is per fectly normal.
Following
prolonged operation of the
v
ehicle at very low speed or at idle,
y
ou may, in exceptional circumstances,
n
otice the emission of water vapour at
t
he exhaust on acceleration. This does
n
ot affect the behaviour of the vehicle
or
the environment.
When
carrying
out
work
on
the
battery,
refer
t
o
the
"12
V
battery"
section
for
details
of
the
p
recautions
to
be
taken
before
disconnecting
t
he
battery
and
following
its
reconnection.
Depending on the environment (e.g. dusty a tmosphere) and the use of the vehicle (e.g. city d
riving),
r
eplace them twice as often if necessar y .
A
clogged passenger compartment filter may have
a
n adverse effect on the per formance of the air
c
onditioning system and generate undesirable
o
dours.
Page 253 of 450

251
Manual gearbox
Automatic gearboxBrake pads
Brake wear depends on the style o
f driving, particularly in the case o
f vehicles used in town, over short
d
istances. It may be necessary to have
t
he condition of the brakes checked,
e
ven between vehicle services.
The
gearbox
does
not
require
any
m
aintenance
(no
oil
change).
Refer
to
the
manufacturer's
service
s
chedule
for
the
checking
interval
for
t
his
c
omponent.
Only
use products recommended by
C
ITROËN or products of equivalent
q
uality
an
d
sp
ecification.
In
order to optimise the operation of
u
nits as important as those in the
b
raking system, CITROËN selects and
o
ffers very specific products.
The
gearbox
does
not
require
any
m
aintenance
(no
oil
change).
Refer
to
the
manufacturer's
service
s
chedule
for
details
of
the
level
c
hecking
interval
for
this
component.
Electronic gearbox
The gearbox does not require any m aintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for details of the checking
i
nterval for this component. For
information on checking brake
d
isc wear, contact a CITROËN dealer
o
r a qualified workshop.
Brake disc wearParking brake
If excessive travel or a loss of e
ffectiveness of this system is
n
oticed, the parking brake must be
c
hecked, even between two services.
Unless
there
is
a
leak
in
the
circuit,
a
drop
in
t
he
brake
fluid
level
indicates
that
the
brake
p
ads
are
worn. Checking
this system must be done by a
C
ITROËN dealer or a qualified workshop.
After
washing
the
vehicle,
dampness,
o
r
in
wintry
conditions,
ice
can
form
o
n
the
brake
discs
and
pads:
braking
e
fficiency
may
be
reduced.
Make
light
b
rake
applications
to
dry
and
defrost
t
he
brakes.
Checks
Page 254 of 450
Page 255 of 450
Page 256 of 450
Petrol enginePureTech 82 PureTech 82 S&S V Ti 120
ge
arbox Manual
(
5-speed)ETG
el
ectronic
(
5-speed) Automatic
(
4-speed)
Model code:
SA... HMZ6
HMZ6/PS 5FS9
Cubic
capacity (cc) 1 19 91 19 91 598
Bore
x stroke (mm) 75
x 90.575
x 90.577
x 85.8
Max
power: EU standard (kW)* 6060 88
Max
power engine speed (rpm) 5 7505 7506 000
Max
torque: EU standard (Nm) 118118160
Max
torque engine speed (rpm) 2 7502 7504 250
Fuel UnleadedUnleadedUnleaded
Catalytic converter yesYe s yes
Engine
oil capacity (in litres)
(with
filter replacement) 3.25
3.25 4.25
*
T
he maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
Petrol engines
.../S: model fitted with Stop & Start.