2016 Citroen BERLINGO MULTISPACE RHD Owner's Manual

 79
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
REAR BENCH SEAT
Each 1/3 - 2/3 section can be fully folded,  then   removed   individually.
Head restraint
The 1/3 - 2/3 split rear bench seat is fitted with  "comma"   shape   head   restraints.
High position: lift and raise the head restraint.
Low
  position:   press   on   the   head  
restraint

  to   lower   it.
To
  remove   the   head   restraint,   after  
raising it press the tab and lift the head
restraint.
T

o install the head restraint, engage
the rods of the head restraint in the
holes
  keeping   it   in   line   with   the   seat  
back.
EASE OF USE and COMFORT
4

80
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Fully folded position
Example of operations for the 
1/3   section.  They   are   identical   for   the  
2/3

  section. -

Raise the grey control bar
, located
at   the   rear   of   the   seat   cushion.
-  
T
ilt   the   entire   seat   forward.
Putting back in place
Check that the seat is locked on  the   floor   securely   when   it   is  
returned

  to   the   sitting   position.
-

Place the head restraints in the low
position.
-

 
If

 
necessary,
 
move
 
the
 
front
 
seats
 forward.
-
Press the grey control located on
the
 
upper
 
part
 
of
 
the
 
seat
 
backrest.
-
 
Fold

 
the
 
seat
 
backrest
 
onto
 
the
 
seat

 
cushion. Tilt the entire seat rearwards until it
locks
  into   place.
Raise   the   seat   backrest.
The
 
seat   is   locked   correctly   when   the  
control

  (at   the   top   of   the   seat   back)   is  
no

 
longer   visible.

81
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Removing the bench seatRefitting the bench seat
Refer to the "Fully folded position",
described
  previously. To return the bench seat
(1/3
  section   and/or   2/3   section)   to  
the "passenger carrying" position,
refer to the "Fully folded position"
described

  previously.
-

T
ilt the entire seat rearwards by
approximately   45°.
-
Lift the bench seat
vertically to the
limit   of   the   anchorages.
-
Straighten bench seat by tilting it
forwards

  then   lift   it.
-
 
If
  necessary,   move   the   front   seats  
forward.
-

 
Place
  the   bench   seat   (1/3   section  
and/or

  2/3   section)   in   the   fully  
folded

  position. -  
Of
fer  
up
 
the
 
bench
 
seat
 
(1/3
 
section
 
and/or

  2/3   section)   vertically.
-  
Place
  the   hooks   between   the  
two   bars.
-  
Fold
  the   bench   seat   rearwards.
EaSE oF USE and CoMFoRT
4

82
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
REAR SEATS (5 SEAT VERSION)Head restraint
Each seat can be removed individually.
Each   time   a   seat   is   returned   to   the  
sitting

  position   or   after   removing   then  
refitting

  a   seat,   check   that   it   is   locked  
on

  the   floor   securely.
The three independent rear seats
are
 
fitted
 
with
 
"comma"
 
shape
 
head
 
restraints.
The

 
back
 
of
 
the
 
centre
 
seat,
 
folded
 
onto
 the seat cushion, has a shell which


serves
 
as
 
a
 
table
 
with
 
cup
 
holder. High
  position:   lift   and   raise   the   head  
restraint.
Low

  position:   press   on   the   head  
restraint

  to   lower   it.
To   remove   the   head   restraint,   after  
raising it press the tab and lift the head
restraint.
T

o install the head restraint, engage
the rods of the head restraint in the
holes   keeping   it   in   line   with   the   seat  
back.

83
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Adjusting the angle of the seat backrest
Placing the seat back in the
table position
Returning the seat back to the sitting position
Placing the seat in the fully
folded position
Returning the seat to its original position
- Operate  the   control   and   adjust   the  angle
  of   the   seat   backrest.
-
 
Pull
  the   control   to   fold   the   seat   back  
onto

  the   seat   cushion.
Do
  not   place   hard   or   heavy   objects  
on

  the   table.  
They
  could   become  
dangerous

  projectiles   in   the   event   of  
sharp

  braking   or   impact. -
 
Release
  the   seat   back   by   pulling  
the control, then return it to its
original

  position.
When   returning   the   seat   backrest   to  
the sitting position, ensure that it is
locked

  securely.
-
Pull the control to place the seat
back

  in   the   table   position.
-

Raise the bar located behind the
seat to release the rear anchoring
points.
-


T
ilt the entire seat forwards, until it
locks. -
 Push   the   red   control.
-
 
Fold
  back   the   seat   to   fix   the   rear  
anchoring

  points.
-
 
Raise
  the   seat   backrest   by   pulling  
the

  control.
-
 
Check
  that   the   seat   has   correctly  
locked

  into   place.
Before
  unfolding   the   seat,   check  
that

  no   object   is   obstructing   the  
anchorage points or preventing
correct

  locking   of   the   seats.
EaSE oF USE and CoMFoRT
4

84
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Removing the seat
- If  necessary,   move   the   front  seats forward and lower the head
restraint.
-

Place the seat in the fully folded
position.
Good practice
Following the various operations:
-  
do
  not   remove   a   head   restraint  
without

  storing   it   and   fix   it   to   a  
support,
-


ensure that the passengers can
always access the seat belts and
fasten

  them   easily,
-
 
passengers
  must   never   take  
their

  seat   without   adjusting   and  
fastening

  their   seat   belt.
Refer to the "Fully folded position"
described
 
previously.
-

Press the red lever to release the
front

 
feet.
-

T

ilt the entire seat rearwards by
approximately
 
45°
 
without
 
releasing
 
the

 
lever.
-
 
Release

 
the
 
lever.
-

Lift the seat

vertically
 
to
 
the
 
limit
 
of
 
the

 
anchorages.
-

Straighten the seat by tilting it
forwards

 
then
 
lift
 
it.
Refitting the seat
- Tilt   the   seat   forward   by   45°.
-  
Place
  the   hooks   between   the   two  
bars.
-

 
Fold
  back   the   seat   to   fix   the   rear  
anchoring

  points.
-

Pull the control to return the seat
back

  to   its   initial   position.
-
 
Raise
  the   head   restraint.
Before
  unfolding   the   seat,   check  
that

  no   object   is   obstructing   the  
anchorage points or preventing
correct

  locking   of   the   seats.

85
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Head restraint
This is of the "comma" shape type.
High   position:   press   the   tab,   lift   and  
raise

  the   head   restraint.
Low
  position:   push   the   tab   and   press  
the

  top   of   the   head   restraint   to   lower   it.
To
  remove   the   head   restraint:   place   it   in
 the

  high   position,   lift   it,   then   remove   it.
Store it inside the vehicle, securing it
firmly.
To
  install   the   head   restraint:   engage  
the rods of the head restraint in the
holes

  keeping   it   in   line   with   the   seat  
back.
Each

 
seat
 
can
 
be
 
removed
 
and
 
must
 
be

 
replaced
 
in
 
the
 
specified
 
position,
 
indicated

 
by
 
a
 
symbol
 
on
 
its
 
label.
The seats of row 2 and row 3 are
independent
 
and
 
adjustable.
REAR SEATS (7 SEAT VERSION)
EaSE oF USE and CoMFoRT
4

86
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Left-hand outer seat
Types of Row 2 seat
Types of Row 3 seat
Centre seatRight-hand outer seat
Right-hand outer seat
Left-hand outer seat