2016 Alfa Romeo 4C Owner handbook (in English)

COLD TYRE INFLATION PRESSURE (bar)
Tyres provided Inflation pressure (bar)
Front tyres205/45 R17 88Y XL 1.8
205/40 R18 86Y XL 1.8
Rear tyres235/40 R18 95Y XL 2.0
235/35 R19 91Y XL 2.0
When the tires are warm, the inflation pressure should be + 0.3 bar in relation to the recommended figure. However, recheck
that the value is correct with the tyre cold.
With snow tyres, add +0.2 bar to the pressure value prescribed for standard tyres.
If it is necessary to raise the vehicle, refer to the "Raising the vehicle" paragraph in the "In an emergency" chapter.
158
TECHNICAL SPECIFICATIONS

DIMENSIONS
Dimensions are expressed in mm and refer to the car equipped with its standard-supplied tyres. Height is measured with car
unladen.
LUGGAGE COMPARTMENT VOLUMEUnladen capacity (V.D.A. standards): = 110 dm
3
AB C D EFGH L
3990 864 2380 746 1184 1639 1868 1606 2090
Small variations with respect to the reported values are possible depending on the dimensions of the rims.
141A0L0119
159

PERFORMANCE
Versions Top speed (km/h)Acceleration from 0-100 km/h
(sec)
1750 Turbo Petrol258 4,5
160
TECHNICAL SPECIFICATIONS

WEIGHTS
Versions1750 Turbo Petrol
Unladen weight (with all fluids, fuel tank 90% full
and without optional equipment):920
Payload including the driver:
(*)255
Maximum permitted loads
(**)
- front axle:490
– rear axle:755
- total:1175
Towable loads (kg)
- braked trailer:0
- non-braked trailer:0
Maximum load on roof: 0
Maximum load on ball joint (braked trailer): 0
(*) If special equipment is fitted, the unladen vehicle weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment within the maximum permitted loads.
161

REFUELLING
1750 Turbo Petrol
Prescribed fuels / Original fluids and
lubricants
litres kg
Fuel tank 40 -
Unleaded petrol not less than 95 RON (EN
228 specification)
including a reserve of 4 - 5 -
Engine cooling system 10.6 9.4Mixture of distilled water and PARAFLU
fluid
UP
50%(*)
Engine sump 5.4 4.6
SELENIA SPORT POWER
Engine sump and filter 5.8 5.0
Gearbox casing/differential: 1.88 1.6 TUTELA TRANSMISSION GEARTECH
Transmission hydraulic activation system 1.45 1.2 TUTELA CS SPEED
Hydraulic brake circuit with ABS (Anti-lock
braking system)0.52 0.56 TUTELA TOP 4
Windscreen washer fluid reservoir 1.9 1.7Mixture of water and TUTELA
PROFESSIONAL SC 35
(*) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLUUPand demineralised water.
162
TECHNICAL SPECIFICATIONS

FLUIDS AND LUBRICANTS
Your car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
PRODUCT SPECIFICATIONS
UseFluid and lubricant specifications for a correct use
of the carGenuine fluids and
lubricantsReplacement interval
Lubricant for petrol
engines
32)
SAE 5W-40 ACEA C3 grade totally synthetic lubricant.
FIAT 9.55535-GH2 classification.SELENIA SPORT POWER
Contractual Technical
Reference No. F052.H12According to Scheduled
Servicing Plan
163

UseFluid and lubricant specifications for correct vehicle
operationOriginal fluids and
lubricantsApplications
Lubricants and
greases for drive
transmissionSAE 75W 85 grade synthetic lubricant
FIAT 9.55550-MZ3 classification.TUTELA TRANSMISSION
GEARTECH
Contractual Technical
Reference No. F704.C08TCT automatic
transmission
Specific fluid for electro-hydraulic ratio selector actuators
FIAT 9.55550-SA1 classificationTUTELA CS SPEED
Contractual Technical
Reference No. F005.F98Lubricant for
electro-hydraulic actuator
Molybdenum disulphide grease, for use at high
temperatures. N.L.G.I. consistency 1-2
FIAT 9.55580 classificationTUTELA ALL STAR
Contractual Technical
Reference No. F702.G07Wheel side constant
velocity joints
Grease for constant velocity joints with low friction
coefficient. N.L.G.I. consistency 0-1
FIAT 9.55580 classificationTUTELA STAR 700
Contractual Technical
Reference No. F701.C07Differential side constant
velocity joints
Brake fluidSynthetic fluid for brake and clutch systems. Exceeds
specifications: FMVSS no. 116 DOT 4, ISO 4925, SAE
J1704
FIAT 9.55597 classificationTUTELA TOP 4
Contractual Technical
Reference No. F001.A93Hydraulic brakes and
hydraulic clutch controls
Protective agent for
radiatorsRed protective with antifreeze action, based on inhibited
monoethyl glycol with organic formula. Exceeds CUNA
NC 956-16, ASTM D 3306 specifications.
FIAT 9.55523 classificationPARAFLU
UP(*)
Contractual Technical
Reference No. F101.M01Percentage of use: 50%
distilled water 50%PARAFLUUP(**)
Windscreen washer
fluidMixture of alcohol, water and surfactants CUNA NC
956-11
FIAT 9.55522 classificationTUTELA PROFESSIONAL
SC 35
Contractual Technical
Reference No. F201.D02To be used diluted or
undiluted in windscreen
washer/wiper systems
Adhesive for glassesMS Polymerbase adhesive
FIAT 9.55738/C classificationSIMSON ISR 70-08 APSticking the glasses on
the body
(*)IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.
(**)When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60% PARAFLUUPand 40% demineralised water.
164
TECHNICAL SPECIFICATIONS

IMPORTANT
32)The use of products with different specifications than those indicated above could cause damage to the engine that is not covered by the
warranty.
165