2015 AUDI RS5 COUPE engine speed

Instruments and indicator Lights
Instruments and indicator Lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of information.
Fig. 3 Overv iew of t he inst rument cluste r
CD Coolant temperature gauge .. .. .
@ Tachome ter .... .. .. ..... .... .
@ War ning/ indicator lights . .. ... .
@ ISETI button .............. ... ·
® D isp lay
- Driver informat io n system .... .
- Time and date d isp lay . .. .. ... .
- Odometer .... .. .... ... . ... .
@ Reset b utton for trip odometer
@ Fu el gauge ... .. ...... .. .. ... .
10
11
1 3
11
23
12
1 2
12
1 2
- When swit ching the ignition o n, the need les
i n the instrument clus ter swi ng upward
b rief ly .
- The ill umination for the inst rument cluste r
li ghts up whenever you switch on the igni­
tion with the
vehicle headlights off . As the
day light fades, the instrument cluster illu­
mination likewise d ims automatically and
will go out completely whe n the o utside
li ght is very low. This feature is meant to re­
mind you to swi tch on the headlights when
outside light con ditions become poor.
10
Engine coolant temperature gauge
The engine coolant gauge ¢ page 10, fig. 3 CD
only works when t he ignition is on. To prevent
damage to your engine, please note the follow­
ing important points :
Engine cold
If the needle is at or close to the bottom o f the
gauge, the engine has not yet reached its operat ­
i ng temperature. Avo id h igh engine speeds,
heavy engine loads, and heavy thrott le applica­
tions .
Normal temperature
When the engine has reached its operating tem­
perature, the needle will move to the middle of
the ga uge and rema in there. I f the engine is
working hard at hig h outs ide temperatures, t he
needle may move higher on the gauge. This is not
a cause for concern as long as the. warning
li ght i n the inst rumen t cluste r display does no t il­
l u m inat e. If the . warning lig ht in the inst ru­
ment cluster d isp lay flashes, th is can me an one
of two th ings : ei th er the coolan t
temperature is
too h igh, or t he coo lant
level is too low
¢ page 17 .,._

"' N
0:: l­oo
rl I.O
"' N
"' rl
A WARNING
-Always observe the warning in¢ page 187,
before open ing the hood and check ing the
engine coolant level.
- Never open the engine hood if you see or
hear steam, or if you see engine coolant
dr ipping from the engine compartment. You
cou ld burn yourself. Let the eng ine cool off
first so that you cannot hear o r see any
steam o r engine coo lant.
0 Note
- Mount ing additional lights or accesso ries in
fron t of the a ir inlets reduces the cooling ef­
fect of the radia to r. A t high outside temper­
atu res or high e ngine load, the eng ine could
overheat.
- The front spo iler has been designed to prop­
erly distribute the cooling air when the veh i­
cle is moving. If the spo iler is damaged, this
could reduce the cooling effect and the en­
gine could then overheat. Ask your author­ ized Audi dealer for assistance.
Tachometer (engine rev counter)
The tachometer indicates the engine RPM (revo­
lutions per minutes).
If engine RPM drops be low 1,5 00, you should
downshift to the next lower gea r. T he red area at
the end of the scale indicates max imum permis­
sible eng ine RPM after the break-in period . Be­
fore reachi ng this area, move the selector lever to
position D/S or ease your foot off the accelerator
pedal.
(D Note
The tachometer needle@¢ page 10, fig. 3
should o nly briefly be in the red zone: you
co uld damage your eng ine! The beginn ing of
the r ed zone varies depending on the engine.
@ For the sake of the environment
Upshift ing early saves fuel and reduces eng ine
noise .
Instrument s and indi cator ligh ts
~ button
Fig. 4 SET butto n in the instrument cluste r
The lsET j button performs the following func­
t ions:
Switching on t ime, date , temperature
display and odometer
The display appears for approximate ly 30 sec·
onds when you press the
! SE T! button c;, fig . 4
with the igni tion off .
Starting the Auto-Check sequence
The Auto-Check system constantly monitors cer­
tain individual functions and components of the
vehicle when the ignition is turned on and when
the vehicle is moving .
With the ign ition turned on, you can start the
"Auto-Check sequence" by pressing the
I SE TI but­
ton. You can perform an Auto-Check sequence
when the vehicle is sta tionary and the ign it ion is
tu rned on o r whe n th e vehicle is moving slowe r
t h an 3 mph (5 km/ h).
In add ition , the number of keys init ia lised for
your vehicle is disp layed .
L2 3/3 means that
th ree keys have be en initialised. This feature ena­
bles used car buye rs to make sure they have r e­
c e ived all of the keys.
If you are g iven only two keys, for instance, you
should take the vehicle and the existing keys to
an a utho rized Aud i dea le r to have the miss ing key
disabled.
It i s also important to no tify your insur­
ance company abo ut the loss.
Setting the sp eed warning
By pressi ng the !SET ! button briefly, you can set
th reshold 1 of the speed wa rn ing while you are
dr iv ing ¢page 78. By ma intai ning pressure on
11

M N
0:: l­oo ,...., \!) 1.1"1
N 1.1"1 ,....,
Indicator lights
Description
The indicator lights in the instrument cluster
blink or turn on. They indicate functions or mal­
functions¢ &.
Messages may appear with some indicator lights .
A warning signal will sound at the same time.
The messages disappear again after a short time.
To display a message again, press the
I SE TI but­
ton ¢
page 11. If several malfunctions occur,
each of the indicator/warning lamps will be dis­
p layed in succession for about two seconds at a
time.
Some indicators lights in the display can turn on
in several colors.
8_ WARNING
- Failure to heed warning lights and other im­
portant vehicle information may resu lt in
serious personal injury or vehicle damage.
- Whenever sta lled or stopped for repa ir,
move the vehicle a safe distance off the
road, stop the engine, and turn on the emer­
gency flasher¢
page 45.
- The engine compartment of any motor vehi­
cle is a potentially hazardous area. Before
you check anything in the engine compart­
ment, stop the engine and let it cool down.
Always exercise extreme caution when work­
ing under the hood¢
page 187.
Overview
Some indicator lights turn on briefly to check the
function of that system when you switch the igni­
tion on . These systems are marked with a./ in
the following tables .
If one of these indicator
lights does not turn on, there is a malfunction in
that system.
Red indicator light s
--------------
US A models:
Brake system./
¢page 15 Instruments
and indicator lights
Canada models:
Brake system./
¢page 15
USA models:
Electromechanical parking brake
¢ page 16
Canada models:
Electromechanical parking brake
¢ page 16
Safety belts
¢page 16
Electromechanical steering./
¢page 174
Battery
¢page 16
Engine oil pressure
¢page 16
Engine oil level
¢page 17
Engine cooling system
¢page 17
Steering column lock
¢page 17
Ign it ion lock
¢ page 18
USA models:
Speed warning system
¢page 77
Canad a models:
Speed warning system
¢page 77
Adaptive cruise control./
¢page 90
Yellow indicator lights
--------------
Electronic Stabilization Contro l
(ESC) ./
¢page 18
Electronic Stabilization Contro l
(ESC) ./
¢page 18
Electronic Stabilization Control
(ESC)
¢page 169
13

Instruments and indicator lights
"O~ I I ~ .,
TPMS
14 USA m
odel s:
Anti-loc k braking system (ABS) de­
fective,/
¢ page 18
Canada mod els :
Anti-lock braking system (ABS) de­
fective,/
¢ page 18
USA models :
Safety systems,/
¢page 19
Canada model s:
Safety systems ./
¢page 19
Worn brake pads
¢ page 19
Electromechanical parking b rake
¢page 16
Tire pressure monitoring
system,/
¢ page214
Tire pressure monitoring system
¢page214
Electronic power control./
¢page20
Malf unct ion ind icator Lamp (MIL)
,I
c::>page 20
Engine speed limitat ion
c::> page20
Engine oil level
c::> page 17
Engine oil sensor
c::>page20
Battery
c::>page 16
Tank system
c::>page20
Windshield washe r fl uid leve l
¢page20
Wi ndshield wipers
¢page20
Remote control key
c>page 73
Battery in remote control key
¢ page32
Defect ive light bulb warning
¢ page 21
Rear fog lig ht(s)*
<=> page 21
Headlight range control
¢page 21
Adaptive l ight*
c> page 21
Light -/ rain senso r*
c> page 21
Sport d iffe rential*
c> page 21
Ignition lock
c>page22
Steering co lumn lock
c> page 17
Electromechanica l steer ing, dy­
namic steering*,/
c>page 174
Rear spo ile r
c> page 171
Transmission
c>page86
Transmission
c>page 86
Other indicator light s
--------------Turn signals
c>page22
USA models: Cruise contro l
c>page 78
Canad a model s: C ru ise contro l
c>page 78
Adaptive c ruise cont rol*
c> page 90
Adaptive c ruise control*
c> page 90
High beam
c>page44

M N
0:: l­oo ,...., \!) 1.1'1
N 1.1'1 ,....,
BRAKE /((f) ) Brake system
The ligh t illu min ates when t he igni tion is switch ­
ed on.
It goes ou t after the engine h as bee n
started . This indicates t hat the brake war ning
light is f unctioning p ro p er ly .
If the brake warning light doe s not light up
when the engine is cranking, there may be a malfunction in the electrical system . In this
case , contact your authorized Audi dealer.
If the b rake system wa rning/ind icator light tu rns
on, there is a br ak e system malfunc tion.
1111 (USA mod els )/ . (Canada models) Stop
vehicle and check brake fluid level
If the indicator light turns on and the message
appears, proceed as follows:
~ P ull off the road.
~ Stop the vehicle.
~ Turnoff the engine.
~ Check the brake fluid level c::> page 195.
~ Contact you r nearest author ized repa ir facility if
n ecessary .
Warning! Fault in brake system. Contact dealer
If the ABS indicator light ~ (U SA mode ls)l [i]
(Canada models), the ESC indicato r light
J.i) and
the brake system indicator light
1111 (USA mod­
e ls)/ . (Canada models) turn on and the mes­
sage appears, the ABS, ESC and braking d istribu ­
tion are not wor king
c::> .&. .
Carefully drive to your authorized Audi dealer im­
mediately to have the malfunct io n corrected
c::> .&. .
1111 (USA models )ta (Canada models ) Park­
ing brake system fault ! See owner's manual
- If the indicator light and the message appear
when stationary or after switching the ign i·
tion on ,
check if you can re lease the park ing
brake. After releasing the parking brake, care­
fully drive to your authorized Aud i dealer im­
med iate ly to have the malfunction corrected . If
yo u cannot release the pa rking brake, see k pro­
fessional ass ista nce.
- If the indicator light and the message appear
while driving , the emergency b ra ki ng funct io n
Instruments and indicator lights
may no t be ava ilable . It may not be possible to
set the parking brake or re lease it once it has
been set. Seek professiona l assistance .
( U SA mode ls):
If the war ning ligh t 1111 and the
warning light
Ill appear togethe r, immedia tely
contact your authorized Audi dealer or qua lified
wor kshop to have all b rake pads inspected
c::> page 19.
When the light comes on, an au dible warning sig ­
nal is also given.
A WARNING
-- Always observe the warn ings in
c::> page 187, before opening the h ood and
checking the brake flu id.
- Driving with low brake fluid is a safety haz ­
ard. Stop the car and get professional ass is­
tance.
- If the 1111 (USA models) . (Canada mod­
e ls) brake system indicator light turns on to­
gether with t he ABS and ESC ind icator
lig hts, the ABS/ESC regulat ing funct ion may
have fa iled. Functions that stabilize the ve­
h icl e are no longe r available. This co uld
c a use t he ve hicle to swerve and increas e t he
ris k of s liding. Drive carefu lly to the neares t
author ized Audi dealer or other qualified
wo rkshop and have the malf unct ion co rrect ­
ed.
- If the b rake wa rning/in dicator light does
not go out after a few seconds and the pa rk­
ing brake is released, or lights up wh ile you
are driving, the fl uid level in the brake f lu id
rese rvoir is too low. If y ou believe t hat it is
safe to do so, proceed immediately at low
speed to the nea rest authorized A udi dealer
or qualified workshop and have t he b rake
sy stem inspec ted.
- Always keep in min d that after s evera l brak e
a pplicat ions, you wi ll n eed gre ate r pr essure
o n th e br ake pe dal t o s to p you r ve hicle . Do
no t rely on st rained bra kes to respond with
maxim um stop ping power i n cr itica l s itua ­
tions . You must a llow for increased braking
d istances. The extra d istance used up by
fading brakes could lead to an accident .
15

Instruments and indicator lights
co mes on in the i nstrument cl uster display,
immediately contac t your author ized Audi
dealer or qualified workshop to have all
brake pads checked o r replaced if necessary.
EPC Electronic power control
This warning/indicator light monitors the elec­
tronic power control .
The (m warning/indicator light (Electronic Power
Control) i llum inates when yo u switch the ignition
on as a function check.
(D Tips
If this warning/indicator light ill uminates
while you are dr iv ing, then the re is a malfunc­
tion in the eng ine electronics. Have the mal­
fu nction corrected as soon as possible by your
author ized A udi dealer or a qualified repair fa­
cility.
o Malfunction Indicator Lamp (MIL)
The Malfu nction Indicator Lamp (M IL) is part of
the On-Board Diagno stic (OB D II) system . The
symbo l
('4 lights up whe n the ign ition is switch ­
ed on and will turn off afte r th e engine has star t­
ed an d has sett le d at a constant idle speed . This
indicates that the MIL is working proper ly.
The warning ligh t illumina tes when there is a
malfunct ion in the engine e lectronic system .
Contact your authorized A udi dealer and have the
malfunctio n corrected .
An improperly close d fu e l fi ller cap may also
cause the MIL li ght to il lum inate ¢
page 185 .
For mo re info rmat io n ¢page 28.
!?) Engine speed limitation
Applies to vehicles: with engine speed limitation
(Iii Do not ex ceed max. engine speed of XXXX
rpm
The engine speed is automatically lim ited to the
speed d isp layed in the dr iver information system.
T his protect s the eng ine from overheat ing.
20
The eng ine speed limita tion deactivates once the
engine is no longe r in the critical temperature
r ange and you have re leased t he accelerator ped ­
a l once .
I f the engine speed limitation was activated by
an engine contro l ma lf u nction, the indicato r light
(m also turns on. Make sure that the speed does
not g o above the speed disp layed. Dr ive to your
authorized Aud i dea ler immediately to have the
malfunction cor rected .
~~, Engine oil sensor
• Oil level! S ensor defective
If the symbol illuminates, contact yo ur author­
i zed Audi dealer and have the oil sensor inspect­
ed . Until you have this done, check the oil level
each time you refue l just to be on the safe s ide
¢ page 191.
ffi Tank system
IIJ Please refuel
If the indicato r light turns on for the first t ime
and t he m essage appea rs, there are about
2 .1- 2. 4 gallons (7 -9 liters) of fuel left i n the
t ank . T ime to re fuel
¢page 184.
D Fuel tank syst em malfunction! Contact deal­
er
If the indicator light turns on and this message
appears , there is a malfunct io n in the tank sys­
tem .
Drive to your authorized A udi dealer immediate ly
to have the malfunct ion corrected.
' G> Windshield washer fluid level
II Please refill washer fluid
If the symbol illuminates, add w indshield washer
fl uid to t he washer system and also to the head­
li ght washer system*¢
page 200 .
~ Windshield wipers
El Windshield wiper defective

"' N
0:: l­oo
rl I.O
"' N
"' rl
Driver information
system
Introduction
The Driver information display inside the instru­
ment cluster provides you, the driver, with im­
portant information.
Fig. 7 Instrument cluster: ce nter display
Fig . 8 Wipe r lever: controls fo r the men u display
Cent er dis play
With the ignition on, the display in the Driver In­
formation System shows the following informa­
tion :
- CD* inserted or Radio * station set
- Outs ide temperature* : At temperatures below
41 °F (+S °C), a snowflake symbol appears in
front of the temperature display¢&. .
- Wa rning if one of the doors, front lid o r engine
compartment lid is not closed.
Additional function s
You can open the following functions in the Driv­
er Information System display by pressing the
I RESET I button ¢ fig. 8 one or more times:
Digital speedometer*
T ire pressure monitoring*
¢page213
Dr iver inform atio n sy stem
Trip computer Q page24
Service interval disp lay ¢page26
Speed warning Qpage 77
Gearshift selector positions Au-¢page 81
tomatic transmission
Adapt ive cruise control*
¢ page BB
Lap timer ¢page 27
Eng ine oil temperature indicator ¢ page 26
Auto Che ck Control
Some functions and vehicle components are
scanned for their operati ng status when you
switch the ign ition on and whi le you a re driving.
Malfunctions or required service procedures are
s ignaled audib ly and ind icated by red and yellow
illuminated symbols and rem inders in the dis­
play.
A WARNING
-
- Never rely exclusively on the o utside tem­
perature display to determine if a road sur­
face is icy or not. Keep in mind that road sur­
faces, especially bridges and overpasses, could be ice covered and slippery even at an
outs ide temperature above 41 °F (+5 °C).
- Always remember, even i f the "snowflake"
symbo l (ice warning) does not appea r in the
display, black ice could be on the road.
- Always reduce your speed and drive with
specia l care in cold weather cond itions when
the chance of encountering icy road surfaces
increases.
(D Tips
If the vehicle is stationary, or if you are driv­
i ng at a very low speed, the temperature
shown in the disp lay m ight be slightly higher
than the act ual outs ide temperatu re. This is
caused by the heat being radiated from the
engine.
23

Driver information system
Evaluating times and continuing or
resetting timing
You can evaluate the fastest, slowest and aver­
age Lap times.
Fig . 16 D isplay: lap t ime evaluat ion
... To eva luate lap times, press and hold the
I RESET ! button c::;, page 2 7, fig. 14@for ap­
proximately 2 seconds. The number of laps
traveled, the fastest lap"+", the slowest lap"-"
and the average lap time "0" appears in the dis­
play .
... To continue timing for addit ional laps, press
the wiper sw itch @.
... To reset the timer to zero, press and hold the
I RESE T! button again for approximate ly 2 sec­
onds .
... To switch the lap timer off completely, press
the
I RESE T I button briefly.
(D Tips
-Saved lap t imes cannot be ind ividually de­
l eted from the total results.
- The saved lap timer values will not be lost
after turn ing the ignit ion off.
On Board Diagnostic
System (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) ¢.ij in the
instrument cluster is part of the On-Board Diag­
nostic (OBD II) system.
The warning/indicator light illuminates when the
ignit ion is switched on and goes out after the en­
g ine starts and the idle has stabilized. Th is ind i­
cates that the MIL is working properly.
28
If the light does not go out after the engine is
started, or i lluminates while you are driving, a
malfunction may exist in the eng ine system. If
the light illuminates, the catalytic converter
could be damaged .
Continue driving
with reduced power (avoiding
sustained high speeds and/or rapid accelerations)
and have the condition corrected. Contact your
authorized Audi dealer.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
c::;, page 185.
On-Board Diagnostics
Fig. 17 Locatio n of Data Link Co nnector (O LC)
On-Board Diagnostics monitors the components
of your emission control system. Each monitored component in your engine system has been as ­
signed a code. In case of a malfunction, the com­ ponent will be identified and the fault stored as a
code in the control module memory.
The MIL light may also illuminate if there is a
leak in the on-board fuel vapor recovery system.
If the l ight illuminates after a refueling, stop the
vehicle and make sure the fuel filler cap is prop­
erly closed
c::;, page 185.
In order to make an accurate diagnosis, the stor­
ed data can only be displayed using special diag­
nostic equipment (generic scan tool for OBD).
In order to connect the specia l diagnostic equip­
ment, push the plug into the Data Link Connector
(DLC). The DLC is located to the right of the hood
release
c::;, fig . 17 .
Your authorized Audi dealer or qua lified work­
shop can interpret the code and perform the nec- essary repair . .,,_