2015 AUDI RS5 COUPE Owners Manual

"' N
0:: l­oo
rl I.O
"' N
"' rl
Q/P -Adjusting the left/right exterior mirror.
Move the knob in the desired direction.
®-Heat ing the mirror g lass depending on the
ou tside temperature* .
8 -Folding exterior mirrors*. In the Infotain­
ment system, you can select if the mirrors fold in
automatically when you lock the veh icle
¢page 35.
F ront p assen ger's ext erior mirror tilt
fun ction *
To help you see the cu rb when backing into a
parking space, the surface of the mi rror tilts
slightly. For this to happen, the knob must be in
the position for the front passenger 's outside
mirror .
You can adj ust the ti lted mirror surface by turn ­
ing the knob in the desired direction . When you
move out of reverse and into another gear, the
new mirror position is stored and assigned to the
key you are using.
The mirror goes back into its origina l position
once you drive forward faster than 9 mph
(15 km/h) or turn the ignition
off.
A WARNING
Curved mirror surfaces (convex or spherical*)
increase your field of view. Remember that
vehicles or other objects will appear smaller
and farther away than when seen in a flat mir­
ror .
If you use this mirro r to estimate distan­
ces of following veh icles when changing
lanes, you cou ld es timate incorrectly and
cause an accident .
(D Note
-If the mirror hous ing was moved by force
(fo r example, by running into an object
when maneuvering the vehicle), the m irror
must be folded all the way in using the pow­
er folding function. The mirror housing
must not be moved back into place by hand
because this would impair the function of
the mirror mechanism.
- If you wash the vehicle in an automatic car
wash, you must fold the exterior mirrors in
Li ghts a nd Visio n
to reduce the risk of damage to the mirrors.
Never fold power fo lding exterior mirrors*
by hand . On ly fold them in and out us ing
the power controls.
@ Tips
- If the power adjusting function malfunc­
tions, the glass in both mirrors can be ad­
justed by pressing on the edge of it by hand.
- The exterior mirror settings are stored with
the memory function*¢
page 57.
Dimming the mirrors
N
Fig. 43 Auto matic dimming rearview m irro r*
Manu al dim ming re arvi ew mirror
.. Pull the lever on the bot tom of the m irror back.
Automatic dimming r earvi ew mirror *
.. Press the button@¢ fig. 43 . The indicator
light @ turns on . The rearview and exter ior*
m irrors dim automatically when light shines on
them, for examp le from headlights on a vehicle
to the rear .
A WARNING
Electrolyte fluid can leak from automatic dim ­
ming mirrors if the g lass is broken. Electrolyte
flu id can irritate skin, eyes and respiratory
system.
- Repeated or prolonged exposure to e lectro­
lyte can cause irritat ion to the respiratory
system, especially among people with asth­
ma or other resp iratory conditions. Get
fresh a ir immediately by leaving the vehicle
or, if t hat is not possible, open windows and
doors all the way.
91>
47

Lights and Vision
-If electrolyte gets into the eyes, flush them
thoroughly with large amounts of clean wa­
ter for at least 15 minutes; medical atten­
tion is recommended .
- If electrolyte contacts skin, flush affected
area with clean water for at least 15 mi­
nutes and then wash affected area with
soap and water; medical attention is recom­
mended . Thoroughly wash affected clothing
and shoes before reuse.
- If swallowed and person is conscious, rinse
mouth with water for at least 15 minutes .
Do not induce vomiting unless instructed to
do so by medical professional. Get medical
attention immediately.
(D Note
Liquid electrolyte leaking from broken mirror
glass will damage any plastic surfaces it
comes in contact with. Clean up spilled elec­
trolyte immediately with clean water and a
sponge.
(D Tips
- Switching off the dimming function of the
inside rear view mirror also deactivates the
automatic dimming function of the exterior
mirrors.
- Automatic dimming for the mirror only op­
erates properly if the sun shade* for the rear
window is not in use or the light striking the
inside mirror is not hindered by other ob­
jects.
- The automatic dimming mirrors do not dim when the interior lighting is turned on or
the reverse gear is selected.
48
Sun visors
Fig. 44 Driver 's s ide: sun v iso r
The sun visors for the driver and passenger can
be pulled out of their brackets in the center of
the vehicle and turned towards the doors@.
The mirror light switches on when the cover over
the vanity mirror @opens.
Sun shade
App lies to vehicles: with sun shade
The rear window is equipped with a sun shade.
Fig. 45 With M MI: Button for rear window sun s had e
Fig. 46 Withou t MMI: Button for rear w in d ow s un sha.de
.,. To extend/retract the sun shade, press the 1·•~ 1
button ¢ fig. 45 or¢ fig . 46 . .,.

"' N
0:: l­oo
rl I.O
"' N
"' rl
You can adjust the settings for the rear sun shade
so the shade retracts automatically when you se­lect the reverse gear. To do this, select the
I CAR !
function button
>W indows > Rear blind > auto­
matic > on
or! CAR I function button > Car sys­
tems *
control button > Vehicle settings > Auto­
matic rear blind
> On . The current setting is au­
tomatically stored and assigned to the remote
key . Th e sun shade is extended again as soon as
the vehicle is traveling forward at a speed greater
than
9 mph (15 km/h) if the ignition has not
been switched off in the meantime .
WARNING
When lowering or raising the sunshade, make
sure there is nothing in its way and that it has
a free path to travel. This could cause person­
al injury.
@ Tips
- Pressing the button rn several times con­
secutive ly can trigger the overload protec·
tion. The sun shade can only be extended/
retracted again after a brief waiting period.
- The rear window sun shade only funct ions
when the vehicle interior is warmer than
14°F (-10°C).
Windshield wipers
Switching the windshield wipers on
Fig. 47 Windshie ld wiper lever
Move the windshield wiper lever to the corre­
sponding position:
@ -Windshield w iper off
0 0 -N
"' IX) a:,
(D -Interval mode. To extend/shorten the wiper
intervals , move the switch @to the left/right. In
Lights and Vision
vehicles with a ra in sensor* the wipers turn on in
the rain once the vehicle speed exceeds approxi ­
mately 2 mph (4 km/h). The higher the sensitivi ­
ty of the rain sensor* is set (switch @to the
right), the earlier the windshield wipers react to
moisture on the windshield . In some models, you
can switch ra in sensor mode off and switch inter­
mittent mode on in the MMI* . Select : !CAR I func­
tion button
> Car systems* control button > Driv­
er assist> Rain sensor.
In intermittent mode ,
you can adjust the interval time using the@
switch.
@ -Slow wiping
@ -Fast wiping
@-Single wipe
® -Clean the w indshie ld. To eliminate water
droplets, the windshield wiper performs one af­
terwipe operation after several seconds whi le
driv ing. You can switch this function off by mov­
ing the lever to position ® within
10 seconds of
the afterwipe operation. The afterwipe function is reactivated the next time the ignition is switch­
ed on .
Cleaning the headlights*. The headlight washer
system* operates only when the headlights are
on . If you move the lever to position @, the
headlights are washed in intervals.
A WARNING
--The rain sensor is only intended to assist the
driver. The driver is still respons ible for
manually switch ing the wipers on according
to the visibility conditions.
- The windshield may not be treated with wa­
ter-repelling windshield coating agents. Un­
favorable conditions, such as wetness, dark­
ness, low sun, can result in increased glare.
Wiper blade chatter is also possib le .
- Properly functioning windshield wiper
blades are required for a clear view and safe
driving
c::> page 50, Replacing windshield
wiper blades.
(D Note
- In the case of frost, check whether the
windshield wiper blades are frozen to the
49

Ligh ts a nd Vi sion
windshield . Switching on the windsh ield
wipers can damage the wiper b lades!
- Prior to using a car wash, the windshield
wiper system m ust be switched
off (lever in
position @). This helps to prevent uninten­
tiona l switching on and damage to the
windsh ield wiper system.
@ Tips
- The windshield wipers are switched off
when the ignition is turned off . Activate the
windsh ield wipers after the ignition is
switched back on by moving the windsh ield
wiper lever to any pos it ion.
- Worn or dirty windshield w iper blades result
i n streaking. This can affect the rain sensor*
funct ion. Check your windshield wiper
blades regularly.
- The washer fluid nozzles of the windshield washer system are heated at low tempera­
tures when the ignit ion is on.
- When stopp ing temporarily, (e.g . at a traffic
li ght) the set speed of the windsh ield wipers
i s automatically reduced by one speed.
Cleaning windshield wiper blades
Clea n the w indshield wiper blades whe n they be­
g in to leave streaks . Use a soft cloth and glass
cleaner to clean the windshield wiper blades .
.,. Place the windshield wipe r a rms in the serv ice
pos ition. Re fer to ~
page 50.
.,. Lift the w iper arm away from the front w indow .
A WARNING
Dirty windshield wiper blades can impair your
view. Th is can lead to acc idents.
so
· Replacing windshield wiper blades
Fig. 48 Re mov ing w in d shi eld w ipe r b lade
Wipe r serv ice po sition /blade replacement
position
.,. Switch the ignit ion off and move the windsh ield
w iper lever to position©~
page 49, fig . 47.
T he windsh ie ld wipers move into the service po­
sition.
.,. To bring the w ipers back i nto the origina l posi ­
tion, switch the ignition on and p ress the w ind ­
shie ld wiper lever.
You can also turn the se rv ice position on or
off in
the radio/M MI*;
.,. Sw itch the windshie ld w ipers
off (position @
Qpage49, fig. 47) .
.,. Select: !CAR I function button > Windshi eld
wipers
> S er vice position > on /off . Or
.,. Select: !CAR I function button> Car systems "
control button > S ervi cing & checks > Wiper
s ervice po sition
> On/Off .
Removing the wiper bla de
.,. Lift the windshie ld wiper arm up from the wind­
shie ld.
.,. Press the locking knob
(D Q fig . 48 on the wiper
blade . Hold the wiper blade firmly .
.,. Remove the wiper blade in the direction of the
ar row.
Attaching the wipe r blade
.,. Install the new wiper blade in the reta iner on
the wiper arm @until you hear it click into
place on the w iper arm .
.,. Place the w iper arm back on the winds hield .
.,. Turn the service posit ion
off.

"' N
0:: l­oo
rl I.O
"' N
"' rl
A WARNING
For your safety, you should replace the wiper
blades once or tw ice a year . See your author­
ized Audi dealer for replacement blades .
(D Note
-The windshield wiper blades must only be
replaced when in the service position! Oth­
erwise, you risk damaging the paint on the hood or the windshield wiper motor.
- You should not move your vehicle or press
the windshield wiper lever when the wiper
arms are folded away from the windshield .
The windshield wipers would move back in­
to their orig inal position and could damage
the hood and windshield .
- To he lp prevent damage to the wiper sys ­
tem , always loosen blades which are frozen
to the windshie ld before operat ing wipers .
- To he lp prevent damage to w iper blades, do
not use gaso line , kerosene, paint th inner, or
other solvents on or near the wiper blades.
- To he lp prevent damage to the wiper arms
or other componen ts, do not attempt to
move the wipers by hand .
@ Tips
-Commerc ial hot waxes applied by au tomatic
car washes affe ct the how easily the glass
surface can be cleaned.
- You can also use the service pos it ion, for ex­
amp le, if you want to protect the w indshield
from icing by using a cover.
Li ghts a nd Visio n
Digital compass
Switching the compass on and off
Applies to veh icles: w ith dig ital compass
The compass dire ction is shown in the rearview
mirror.
Fig . 49 Re arv ie w mirr or: Digi ta l compa ss ac tivated
.,. To swi tch the compass on or off , press and hold
the button @unti l the compass d isplay in the
mirror ¢
fig. 49 appears or d isappears .
T he dig ita l compass on ly wo rks when the ignit ion
is on. The directions are indicated with abbrev ia ­
t ions:
N (north), NE (northeast) , E (east), SE
(southeast) , S (south) , SW (so uthw est), W
(west), NW (northwest) .
(D Tips
To prevent inaccurate compass readings, do
not br ing any remote controls, electrical devi­
ces or metallic objects near the mirror .
51

Lights and Vi sion
Adjusting the magnetic zone
Applies to vehicles: with digital compass
The magnetic zone must be adjusted correctly
for the compass to read accurately .
~
LIU ®
Fig . SO No rth A meri ca: magne tic deflection zo ne bo unda ­
ri es
"' Press a nd ho ld the button @~ fig. 50 until the
number of the magne tic zone ap pears in the
rearview mirror .
"' Press the butto n @ repeated ly to select the
correct magnetic zone . The selection mode
turns off after a few seconds.
Calibrating the compass
Applies to vehicles: w ith d ig ital compass
You must recalibrate the compass if it does not
display the correct direction.
"'Press and ho ld the bu tton @unt il a C appea rs
in the rearview mirror.
"' Drive in a circle at about 6 mph (10 km/h) until
a direct ion is displayed in the rearv iew m irror .
A WARNING
-To avoid endanger ing yo urself and othe r
dr ivers, calibrate the compass i n an area
whe re the re is no traffic.
52
- The digital compass is to be used as a direc­
tional a id on ly. Even though you may want
to look at it wh ile you are dr iv ing, you must
still pay attent io n to traffic, road a nd weath­
er cond itions as well as other poss ible haz­
ar ds.

M N
0:: l­oo ,...., \!) 1.1'1
N 1.1'1 ,....,
Seats and storage
General information
Why is your seat adjustment so important?
The safety belts and the airbag system can only
provide maximum protection if the front seats are correctly adjusted.
There are various ways of adjusting the front
seats to provide safe and comfortable support
for the driver and the front passenger. Adjust
your seat properly so that:
- you can easily and quickly reach all the switches
and controls in the instrument panel
- your body is properly supported thus reducing
physical stress and fatigue
- the safety belts and a irbag system can offer
maximum protection ¢
page 128.
In the following sections, you will see exactly
how you can best adjust your seats.
There are special regulations and instructions for installing a child safety seat on the front pas­
senger's seat. Always follow the information re­
garding child safety provided in¢
page 150,
Child safety.
A WARNING -
Refer to¢ page 111, Driving safety for im­
portant information, t ips, suggestions and
warnings that you should read and follow for
your own safety and the safety of your pas­ senge rs.
A WARNING
Incorrect seating position of the dr iver and all
other passengers can resu lt in serious person­
al injury.
- Always keep your feet on the floor when the
vehicle is in motion -never put your feet on
top of the instrument pane l, out of the win­
dow or on top of the seat cushion. This ap­
plies especially to the passengers . If your
seating pos it ion is incorrect, you increase
the risk of injury in the case of sudden brak­
ing or an accident. If the airbag inflates and
Seat s and stor age
the seating position is incorrect, this cou ld
result in personal injury or even death.
- It is important for both the driver and front
passenger to keep a distance of at least
10 inches (25 cm) between themselves and
the steering wheel and/or instrument panel.
If you're sitting any closer than this, the air­
bag system cannot protect you properly. In
addition, the front seats and head restraints must be adjusted to your body height so
that they can give you max imum protect ion.
- Always try to keep as much distance as pos­
sible between yourself and the steer ing
wheel or instrument pane l.
- Do not adjust the driver's o r front passeng­
er 's seat while the veh icle is moving. Your
seat may move unexpectedly, causing sud­
den loss of vehicle control and persona l in­
jury.
If you adjust your seat whi le the vehicle
is moving, you are out of position.
Driver's seat
The correct seat position is important for safe
and relaxed driving.
We recommend that you adjust the dr iver's seat
in the following manner:
"' Adjust the seat in fore and aft direction so that
you can eas ily push the pedals to the floor
while keeping your knees slightly bent¢.&,
in
Why is your seat adjustment so important? on
page 53.
"' Adjust the seatback so that when you sit with
your back against the seatback, you can still
grasp the top of the steering wheel.
"' App lies to veh icles w ith adjustable head re­
straints: Adjust the head restraint so the upper
edge is as even as possible with the top of your
head.
If that is not possible, try to adjust the
head restra int so that it is as close to th is posi­
t ion as possible ¢
page 56.
A WARNING
Never place any objects in the driver's foot­
well. An object could get into the pedal area
and interfere with pedal funct ion. In case of
-
53

Seats and storag e
sudden braking or an accident, yo u wo uld not
be able to brake or accelerate.
Front passenger's seat
Always move the front passenger seat into the rearmost position.
To avo id contact w it h the airbag wh ile i t is de­
p loying, do not sit any closer to the inst rument
panel than necessary and always wear the three ­
point safety belt provided adjusted correctly. We
recommend that you adjust the passenger's seat in the following manner:
.,. Bring the backrest up to an (a lmost) upright
position .
Do not ride with the seat reclined .
.,. Applies to vehicles with adjustable head re­
straints: Adjust the head restra int so the upper
edge is as even as poss ible with the top of your
head. If that is not possib le, try to adjust the
head restraint so that it is as close to this posi­
tion as possible ¢
page 56.
.,. Place your feet on the floor in fron t of the pas­
senger 's seat.
Front seats
Power seat adjustment
F ig . 5 1 Front seats : power seat ad justm ent
Controls
@ -Adjusting the l umbar support*: press the
button in the corresponding position~.& .
@-Movi ng the sea t up/down : press the bu tton
up/down
~ & .
@ -Movi ng the seat fo rward/back: press the but­
ton fo rward/back
~ ,1,. .
54
©-Adjusting the backrest angle: press the but ­
ton forward/back ¢.& .
©-Raising/ lowering* the head res traints: p ress
the button up/down~ &.
@ -Lengthening/shorte ning the upper thigh
support*: lift the hand le. A sp ring moves the
fron t seat c ushion fo rward ¢
,&..
& WARNING -
-Never ad just the driver's or front passeng­
er's seat while the vehicle is moving. If you
do this while the veh icle is moving, yo u will
be out of posit ion. Always adjust the driver 's
or front passenger's seat when the vehicle is
not moving .
- Be careful when adjusting the seat height. Check to see that no one is in the way, or se­
r ious injury cou ld result!
- Because the seats can be electrically adjust­ ed w ith the ignition off or with the ignition
key removed, never leave children unattend­
ed in the vehicle. Unsuperv ise d use of the
electric seat adj ustments may cause serious
m Ju ry.
- To reduce the risk of injury in the case of
sudden b raking or accident, fro nt passen­
ge rs must neve r ride in a moving veh icle
w ith the backres t reclined. Safety belts and
the air bag system on ly offer ma ximum pro ­
tect ion when the bac krest is upright and the
safety belts are properly positioned on t he
body. The more the backrest is recl ined, the
greater the risk of persona l injury from an
incorrect seating posit ion and improperly
positioned safety belts.