Tools and jack9-6 For emergencies
9
5. Add coolant to the radiator and/or reservetank if necessary. (Refer to the “Mainte-nance” section.)6. Examine the radiator hoses for coolantleakage and the drive belt for looseness ordamage.If there is anything wrong with the cool-ing system or drive belt, we recommendyou to have it checked and repaired.
E00800902507
The tools are stowed on the right side of theluggage area.The jack is stowed in the luggage floor box.The storage location of the tools and jackshould be remembered in case of an emer-gency.
WA R N I N G zMake sure that the engine and the Plug-inHybrid EV system
have cooled down
before removing the
radiator cap (D) and
the reserve tank cap (E), because hotsteam or boiling water otherwise will gushfrom the filler port and may scald you.CAUTION zDo not add coolant while the engine is hot.Suddenly adding cold
coolant could damage
the engine. Wait for the engine to cool down,then add coolant a little at a time.
To o l s a n d j a c k Stor age
1- Tools2- Jack
BK0203201EN.book 6 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分
Engine oil
Maintenance 11-5
11
E01000404039
The engine oil used has a significant effect onthe engine’s performance, service life andstartability. Be sure to use oil of the recom-mended quality and appropriate viscosity.All engines consume a certain amount of oilduring normal operation. Therefore, it isimportant to check the oil level at regularintervals or before starting a long trip.1. Park the car on a horizontal surface.2. Switch off the engine.3. Wait a few minutes.4. Remove the dipstick and wipe it with aclean cloth.5. Reinsert the dipstick as far as it goes.
6. Remove the dipstick and read the oillevel, which should always be within therange indicated7. If the oil level is below the specified limit,remove the cap located on the cylinderhead cover and add enough oil to raise thelevel to within the specified range. Do notoverfill to avoid engine damage. Be sureto use the specified engine oil and do notmix various types of oil.8. After adding oil, close the cap securely.9. Confirm the oil level by repeating step 4to 6.
zSelect engine oil of the proper SAE vis-cosity number according to the atmos-pheric temperature.SAE 0W-20, 0W-30, 5W-30, and 5W-40engine oils can only be used if they meetACEA A3/B3, A3/B4 or A5/B5 and APISG (or higher) specifications. zUse engine oil conforming to the follow-ing classification:•API classification: “For service SG” orhigher•ILSAC certificated oil•ACEA classification:“For service A1/B1, A3/B3, A3/B4, orA5/B5”
Engine oil To c h e c k a n d r e f i l l e n g i n e o i l
FULL LOW
NOTE
zThe engine oil will dete
riorate rapidly if the
vehicle is subjected to severe conditions,requiring earlier oil replacement.Please refer to the maintenance schedule. zFor information on how to dispose of usedengine oil, refer to page 2-15.
Recommended engine oil vis-cosity
BK0203201EN.book 5 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分
