2014 MITSUBISHI OUTLANDER SPORT wheel

Instruments and Controls1-1
1
Overview
E00100108168
Instruments and Controls Windscreen wiper and washer switch P.6-47 Rear window wiper and washer switch P.6-51Steering wheel audio remote control switches
* P.8-24
Supplemental restraint system - airbag (for driver’s seat) P.5-21, 5-23Horn switch P.6-54
Cruise control switch
* P.7-35
Supplemental restraint system (SRS) - front knee airbag (for driver’s seat)
* P.5-24
Combination headlamps and dipper switch P.6-40Turn-signal lever P.6-45Front fog lamp switch P.6-46Headlamp washer switch
* P.6-52
Active stability control (ASC) OFF switch P.7-33
Headlamp levelling switch
* P.6-44
Instruments P.6-2
Regenerative braking level selector (paddle) P.7-17
Power switch P.7-10
Steering wheel height and reach adjustment lever P.7-6
Multi information display switch P.6-4Sonar switch* P.7-65
Driver’s side electric tailgate switch
* P.4-17
Acoustic Vehicle Alerting System (AVAS) OFF switchP. 7 - 2 5
Forward Collision Mitigation System (FCM) ON/OFF switch
* P.7-59
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Outside (Rear)1-7 Overview
1
E00100506764
Outside (Rear)
Antenna P.8-40
High-mounted stop lamp P.11-22
Rear window wiperP. 6 - 5 1Rear view camera
*
P. 7 - 6 7Licence plate lamps P.11-22, 11-28
Reversing lamps (passenger’s side) P. 1 1 - 2 2
Stop lamps/Tail lamps P. 1 1 - 2 2 , 1 1 - 2 7
Turn-signal lamps P. 6 - 4 5 , 1 1 - 2 2 , 1 1 - 2 7
Changing tyres P.9-14Ty r e i n f l a t i o n p r e s s u r e s P. 11 -1 0Ty r e r o t a t i o n P. 11 -11Ty r e c h a i n s P. 11 -1 2Size of tyres and wheels P.12-8
Keyless entry system P.4-3Keyless operation system P.4-6Locking and unlocking the doors P.4-14
Ta i l g a t e P. 4 - 1 6Electric tailgate P.4-17
Charging lid P.3-10Charging port courtesy lamp P.3-9
Reversing sensor system
BK0203201EN.book 7 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Plug-in Hybrid EV SystemGeneral information 2-3
2
Motion energy is converted into electric energy using the motor as a power generator.Then a braking force generates and converted electric energy will be charged to the drive battery.zIf you lift your foot off the accelerator pedal during driving, a braking force that equivalent to engine braking of a combusti
on engine vehicle
will be generated. Also, if you shift the select position into “B” (BRAKE) from “D” (DRIVE), effectiveness of the regenerative
braking is get-
ting strong. Shift the selector lever into “B” (
BRAKE) position according to the driving condition.
zRegenerative brake force increases with the foot brake force when the brake pedal is depressed.zIf a problem occurs in the Plug-in hybrid EV system, or if the
ABS and/or the ASC have been activated, the regenerative braking
will be
restricted. The foot brake will still operate.
E00203700027
zEven when the vehicle is driving in EVdrive mode, it may be automaticallychanged to series hybrid mode or parallelhybrid mode in the following cases:•The plug-in hybrid EV system is too hotor too cold.
•Quick acceleration is applied.•The air conditioner is operating.•The accelerator pedal is depressed hardon an uphill road or expressway.•In cold weather•The vehicle has not been refueled for along time.•The drive battery level is low.
In addition to the above, there are morecases where EV drive mode is automati-cally changed to series or parallel hybridmode.zEven while the vehicle is stopped, theengine may automatically be started in thefollowing cases:•The drive battery level is low.
The roles of the motors and engine in each drive mode
Motor
Engine
Driving conditions
EV Drive Mode
ON
OFF
Driving on streets and commuting
Series Hybrid Mode
ON
Generates electricity
Powerful acceleration uphill road
such as mountain road
Parallel Hybrid Mode
ON
Drivers front wheels and generates
electricity
High-speed driving
Regenerative braking Operation of gasoline engine
BK0203201EN.book 3 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Plug-in Hybrid EV SystemGeneral information 2-5
2
zThe performance may be changed due tothe outside temperature.At low temperature, in particular, the EVcruising range is short and the chargingtime is long, compared to operation atnormal temperature.zThe battery is gradually discharged with-out use and the battery charge is lowered.zIt is not necessary to consume the batterycompletely before charging.zIf your vehicle is not used for a long time,check the drive battery level display every3 months.If the drive battery level display shows 0,charge the battery until some indicationappears. Alternately, put the operationmode of the power switch in “ON” to startthe engine automatically, wait for theengine to stop automatically, then put theoperation mode of the power switch in“OFF”.zMitsubishi Motors collects drive batteries.If you scrap your vehicle, please consult aMitsubishi Motors Authorised ServicePoint.
E00204000027
zEven if the charge level is the same, theEV cruising range may vary depending ondriving conditions. Since driving at highspeed or climbing on a hill requires higherconsumption of the drive battery thanusual, the EV cruising range is shortened.zSince the air conditioning (cooling orheating) consumes power of the drive bat-tery, its operation results in a shorter EVcruising range. Maintain an appropriatetemperature.zPut the selector lever to “B” (BRAKE)position according to the road condition.To c h a rg e t h e d r i v e b a t t e r y w i t h a p p r o p r i -ate use of the regenerative brake, it can beincreased the EV cruising range.
E00204100028
The Acoustic Vehicle Alerting System(AVAS) is device that uses sound to alertpedestrians of the presence of the vehicle.The system operates when the vehicle speedis about 35 km/h or less and the engine is notrunning.Refer to “Acoustic Vehicle Alerting System(AVAS)” on page 7-24.
E00204200029
A crash or impact significant enough torequire an emergency response for conven-tional vehicles would also require the sameresponse for Outlander PHEV.Also follow the instructions described belowto avoid severe burns and electrical shock thatmay result in serious injury or death.
Precautions for operation
EV cruising range Acoustic Vehicle Alerting Sys-tem (AVAS)
WA R N I N GzEven if the Acoustic Vehicle Alerting Sys-tem (AVAS) sounds, pay special attentionto pedestrians.Pedestrians may not notice the oncomingvehicle, which may cause an accidentresulting in serious
personal injury or
death.
In case of a collision
WA R N I N GzIf your vehicle is dr
ivable, pull your vehi-
cle off the road to a safe, nearby locationand remain on the scene.Also, if possible, do the following opera-tions and stay out of the way of anyoncoming traffic while awaiting thearrival of emergency responders.•Apply chocks to the wheels.•Put the select position in “P”(PARK)position.•Apply the parking brake.
BK0203201EN.book 5 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Plug-in Hybrid EV System2-6 General information
2
•Open the windows, doors and tailgate.•Put the operation mode in OFF.•Turn on the hazard warning flashers.• Move the key away from the vehicle toprevent unintended start-up of the sys-tem by inadvertent contact with a switchor impact from the crash.
zNever touch high-voltage wiring, connec-tors, and other high-vol
tage parts, such as
the inverter unit and drive battery. Anelectric shock may occur if exposed elec-tric wires are visible when viewed frominside or outside of
your vehicle. For their
locations, see “High-
voltage components”
on page 2-7.zIf the vehicle receives a strong impact tothe floor while driving, stop the vehicle ina safe place and
check the floor.
zNever start the plug-in hybrid EV systemif you found the leak
of a liquid (except
water of the air conditioner) while check-ing the outside of the vehicle because thereis possibility the fuel system has beendamaged and causing of fire or exploding.In such case, immediately contact yourMITSUBISHI MOTORS Authorized Ser-vice Point.WA R N I N G
zLeaks or damage to the drive battery mayresult in a fire. If you discover them, con-tact emergency services immediately.Since the fluid leak may be lithium man-ganite from the Lithium-ion battery, nevertouch any fluid leaking from the inside oroutside of the vehicle. If the fluid contactsyour skin or eyes, wash
it off immediately
with a large amount of water and receiveimmediate medical attention to help avoidserious injury.zIf you are unable to safely assess the vehi-cle due to vehicle damage, do not touchthe vehicle. Leave the vehicle and contactemergency services. Advise emergencyresponders that this is a Plug-in Hybridvehicle.zIf a fire occurs in this vehicle, leave thevehicle as soon as possible and contactemergency services. Do not attempt toextinguish a fire by yourself. If the fireinvolves a lithium-ion battery, it willrequire large, sustained volumes of waterfor extinguishment. Using a small amountof water or the incorrect fire extinguishercan result in serious injury or death fromelectrical shock.zWhen you leave the vehicle, if possible,open the windows, doors and tailgate toprevent accumulation of poisonous/com-bustible gasses. This will
also assist in the
rescue and fire fighting process.WA R N I N G
zAs with any vehicle fire, the byproducts ofcombustion can be toxic. Do not inhalesmoke, vapors, or gas from the vehicle.Move to a safe distance upwind and uphillfrom the vehicle fire and out of the way ofany oncoming traffic while awaiting thearrival of emergency responders.zIf you detect leaking fluids, sparks, smoke,flames, gurgling, popping or hissing noisesoriginating from the high voltage batterycompartment, contact emergency servicesimmediately. This may result in a fire.zPhysical damage to the vehicle or highvoltage battery may result in immediate ordelayed release of toxic and/or flammablegases and fire.zIf your vehicle needs to be towed, trans-port the vehicle on a
flatbed truck or tow
the vehicle with all wheels off the ground.If the any wheels are on the ground whentowing, this may cause damage to the elec-tric motors. This may also cause a fire, ifwiring in the electric motor unit roombecomes damaged. Refer to “Towing” onpage 9-19.zDo not attempt to repair a damaged Plug-in Hybrid vehicle by yourself. Please con-tact a MITSUBISHI MOTORS Author-ised Service Point for service.WA R N I N G
BK0203201EN.book 6 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Modification/alterations to th
e electrical or fuel systemsGeneral information 2-15
2
zTy r e s a n d w h e e l s w h i c h d o n o t m e e t s p e c -ifications must not be used.Refer to the “Specifications” section forinformation regarding wheel and tyresizes.
Due to large number of accessory andreplacement parts of different manufacturesavailable in the market, it is not possible, notonly for MITSUBISHI MOTORS, but also aMITSUBISHI MOTORS Authorised ServicePoint, to check whether the attachment orinstallation of such parts affects the overallsafety of your MITSUBISHI-vehicle.Even when such parts are officially author-ised, for example by a “general operators per-mit” (an appraisal for the part) or through theexecution of the part in an officially approvedmanner of construction, or when a singleoperation permit following the attachment orinstallation of such parts, it cannot bededuced from that alone, that the drivingsafety of your vehicles has not been affected.Consider also that there basically exists noliability on the part of the appraiser or theofficial. Maximum safety can only be ensuredwith parts recommended, sold and fitted orinstalled by a MITSUBISHI MOTORS
authorised Service Point (MITSUBISHIMOTORS GENUINE replacement parts andMITSUBISHI MOTORS accessories). Thesame also pertains to modifications ofMITSUBISHI vehicles with respect to theproduction specifications. For safety reasons,do not attempt any modifications other thanthose that follow the recommendations of aMITSUBISHI MOTORS authorised ServicePoint.
E00200400368
MITSUBISHI MOTORS CORPORATIONhas always manufactured safe, high qualityvehicles. In order to maintain this safety andquality, it is important that any accessory thatis to be fitted, or any modifications carriedout which involve the electrical or fuel sys-tems, should be carried out in accordancewith MITSUBISHI guidelines.
E00200500499
MITSUBISHI MOTORS has gone to greatlengths to bring you a superbly crafted auto-mobile offering the highest quality anddependability.Use MITSUBISHI MOTORS GENUINEParts, designed and manufactured to maintainyour MITSUBISHI MOTORS automobile attop performance. MITSUBISHI MOTORSGENUINE Parts are identified by this markand are available at all MITSUBISHIMOTORS Authorised Service Points.
E00200600155
Important points!
Modification/alterations to the electrical or fuel systems
CAUTIONzIf the wires interfere
with the vehicle body or
improper installation methods are used (pro-tective fuses not included, etc.), electronicdevices may be adversely affected, resultingin a fire or other accident.
Genuine Parts Safety and disposal informa-tion for used engine oil
WA R N I N GzProlonged and repeated contact maycause serious skin disorders, includingdermatitis and cancer.zAv o i d c o n t a c t w i t h t h e s k i n a s f a r a s p o s s i -ble and wash thoroughly after any con-tact.
BK0203201EN.book 15 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Seat arrangement5-2 Seat and seat belts
5
E00400201886
By operating the front or rear seat, select the desired seat arrangement.
E00400300675
Adjust the driver’s seat so that you are com-fortable and that you can reach the pedals,steering wheel, switches etc. while retaining aclear field of vision.Seat arrangement Normal usageFlat seat
m P. 5-8
Making a luggage area
m P. 5-7
Seat adjustment
WA R N I N GzDo not attempt to adjust the seat whiledriving. This can cause loss of vehicle con-trol and result in an accident. Afteradjustments are made, ensure the seatingis locked in position by attempting tomove the seat forward and rearward with-out using the adjusting mechanism.
BK0203201EN.book 2 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Supplemental restrain
t system (SRS)-airbag
5-22 Seat and seat belts
5
E00407302812
The SRS includes the following components:
Only when the operation mode of the powerswitch is in ON, the airbags will operate.The airbags deployment produces a sudden,loud noise, and releases some smoke andpowder, but these conditions are not injuri-ous, and do not indicate a fire in the vehicle.People with respiratory problems may feelsome temporary irritation from chemicalsused to produce the deployment; open thewindows after airbag deployment, if safe todo so.The airbags deflate very rapidly after deploy-ment, so there is little danger of obscuredvision.
How the supplemental restraint system works 1- Airbag module (Passenger)2- Airbag module (Driver)3- Driver’s knee airbag module4- Side airbag modules
5- Curtain airbag modules
CAUTIONzAirbags inflate at an extremely rapid speed.In certain situations, contact with inflatingairbags can result in abrasions, bruises, lightcuts, and the like.
WA R N I N GzIT IS VERY IMPORTANT TO BE PROP-ERLY SEATED.A driver or front passenger too close tothe steering wheel or instrument panelduring airbag deployment can be killed orseriously injured.Airbags inflate very
fast, and with great
force.If the driver and front passenger are notproperly seated and restrained, the air-bags may not protect you properly, andcould cause serious or fatal injuries whenit inflates.WA R N I N GzDo not sit on the edge
of the seat, or sit
with your lower legs too close to theinstrument panel, or lean head or chestclose to the steering wheel or instrumentpanel. Do not put feet or legs on or againstthe instrument panel.zPlace all infants and small children in therear seat and properly restrained using anappropriate child restraint system.The rear seat is the safest for infants andchildren.
BK0203201EN.book 22 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分