2014 MITSUBISHI MIRAGE width

21
You can also select some of the objects
on the map. If you tap the map at the icon
of a Place of Interest or an alert point, the
object will be selected (you see a red circling
border around the object), and you can get
information about this object or use it as a
route point.
qObjects on the map
Streets and roads
MMES shows the streets in a way that is
similar to how the paper road maps show
them. Their width and colors correspond to
their importance: you can easily tell a freeway
from a small street.
Turn preview and Next street
When navigating a route, the top section of
the Map screen shows information about the
next route event (maneuver) and the next
street or the next city/town.
There is a field in the top left corner that
displays the next maneuver. Both the type of
the event (turn, traffic circle, exiting freeway,
etc.) and its distance from the current position
are displayed.A smaller icon shows the type of the
second next maneuver if it is near the first
one. Otherwise, only the next maneuver is
displayed.
Most of these icons are very intuitive. The
following table lists some of the frequently
shown route events. The same symbols are
used in both fields:
Icon Description
Turn left.
Turn right.
Turn back.
Bear right.
Turn sharp left.
Keep left.
Continue straight in the
intersection.
Icon Description
Go left on the traffic circle, 3rd exit
(next maneuver).
Enter traffic circle (second next
maneuver).
Enter freeway.
Exit freeway.
Board ferry.
Leave ferry.
(yellow)
Approaching a waypoint.
Approaching the destination.
Lane information and Signposts
When navigating on multilane roads, it is
important to take the appropriate lane in
order to follow the recommended route. If
lane information is available in the map data,
MMES displays the lanes and their directions
using small arrows at the bottom of the map.
Highlighted arrows represent the lanes you
need to take.
205-0010-00_QY-7375M-A_EN.indb 21205-0010-00_QY-7375M-A_EN.indb 213/12/2013 9:57:15 AM3/12/2013 9:57:15 AM

110
[Pan Scan]:
Video is displayed so that the height of the
video matches the top and bottom of the
screen. When the video and screen size
differ, the left and right sides are cut off.
[Letter Box]:
Video is displayed so that the width of the
video matches the left and right sides of
the screen. When the video and screen
size differ, unused parts of the screen at
the top and bottom are darkened.
Switching DVD menu languagesOn a DVD in which two or more menu
languages have been included, you can
designate which language to preferentially
display.
Note:
This function does not work if the specified
menu language is not included on the DVD.
1. From the DVD Setup screen, touch the
[Default] key to display the Default screen.
2. Touch the [DVD MENU Language] key to
display the DVD MENU Language screen.3. Touch the key for your preferred DVD menu
language.
The available choices are [English],
[French] and [Spanish].
Available languages vary by disc.
Switching DVD audio languagesOn a DVD in which two or more audio tracks
or audio languages have been recorded, you
can designate which language to preferentially
play.
Note:
This function does not work if the specified
menu language is not included on the DVD.
1. From the DVD Setup screen, touch the
[Default] key to display the Default screen.
2. Touch the [Audio Language] key to
display the Audio Language screen.
3. Touch the key for your preferred audio
language.
The available choices are [English],
[French] and [Spanish].
Available languages vary by disc.
Switching subtitlesOn a DVD in which two or more subtitle
languages have been included, you can
designate which language to preferentially
display.
1. From the DVD Setup screen, touch the
[Default] key to display the Default screen.
2. Touch the [Subtitle Language] key to
display the Subtitle Language screen.
3. Touch the key for your preferred subtitle
language.
The available choices are [English],
[French], [Spanish] and [OFF].
Available languages vary by disc.
Setting the password for the
parental level
1. From the DVD Setup screen, touch the
[Default] key to display the Default screen.
If the password has not been set,
[Unconfig.] is displayed in the [Password]
key panel.
2. Touch the [Password] key to display the
Password Setting screen.
Enter a 4-digit password using the number
keys, and touch the [OK] key to display the
Password Setting (Check) screen.
3. Re-enter the same password using the
number keys, and touch the [OK] key.
The new password is set. [Configured] is
displayed in the [Password] key panel.
Note:
When a disc with view restrictions is inserted,
you will be prompted to input a password.
The disc will not be viewable until the correct
password is entered.
Changing the password for the
parental level
1. From the DVD Setup screen, touch the
[Default] key to display the Default screen.
2. Touch the [Password] key to display the
Enter Password screen.
Enter the current 4-digit password using
the number keys, and touch the [OK] key.
3. Touch the [Change Password] key to
display the Password Setting screen.
4. Enter the new password using the number
keys, and touch the [OK] key.
5. Re-enter the same password using the
number keys, and touch the [OK] key.
The new password is set. [Configured] is
displayed in the [Password] key panel.
205-0010-00_QY-7375M-A_EN.indb 110205-0010-00_QY-7375M-A_EN.indb 1103/12/2013 9:57:28 AM3/12/2013 9:57:28 AM