2014 INFINITI QX60 Quick Reference Guide

23
Power Outlets
12V OUTLETS
The power outlets are for powering electrical



accessories such as cellular telephones. They are



rated at 12 volt, 120W (10A) maximum.

To use a power outlet, open the cap.
The power outlet on the instrument panel 01,



inside the center console 02, on the back of the



center console 03 and in the cargo area 04
are powered only when the ignition switch

is in the ACC or ON position.
120V OUTLET (if so equipped)
The 120V outlet 05 is located on the back of the
center console.

To use the outlets for devices that require 120V



power, place the ignition in the
ON position and



push the power inverter switch 06.
The switch will illuminate when enabled.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
01
04
05
03
06
02
1591599_14b_Infiniti_QX60_QRG_100913.indd 2310/9/13 11:09 AM

Vehicle Information Display
The vehicle information display 01 displays such
items as:
Vehicle settings Trip computer information Drive system warnings and settings
(if so equipped)
Cruise Control System Intelligent Cruise Control (ICC) System
(if so equipped) information
Intelligent Key operation information Indicators and warnings Tire pressure information
USING THE VEHICLE INFORMATION DISPLA
y
The vehicle information display modes can be changed


using the
button
02 and ENTER button 03
located
on the steering wheel.
1.


Press
02 to enter the vehicle information menu items.
2.


Press 04 to navigate through the items in vehicle information.
4.


Press

ENTER
03 to change or select an item in the vehicle information display.
5.


Press 05 to go back to the previous menu.
START UP DISPLA y
When the vehicle is placed in the

ON or ACC position the screens that display in the vehicle
information include:
Active system status (if so equipped) Trip computer Tire pressure information Fuel economy Warnings (displays when a warning is present)
RESETTING THE TRIP COMPUTER
1.

Press the
button
02 until you reach the Trip
computer mode 06.
2.


Press the
button again for more than 1.5
seconds to reset average fuel consumption,
average speed, distance to empty and journey time.
01
system guide
03
02
04
05
06
24
1591599_14b_Infiniti_QX60_QRG_100913.indd 2410/9/13 11:09 AM

25
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
S
y
STEM OPERATING TIPS
Press the or button to interrupt the voice

prompts at any time and speak a command after
the tone.
The “Help” command can be used to hear a list of
available commands at any time.

Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from
the ceiling.
Speak naturally without long pauses and without
raising your voice.
When speaking phonebook names, please be aware
some phones require the last name to be s
poken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
To cancel a Voice Recognition session, say “Cancel” or
“Quit” or press and hold the

or
button for 5 seconds.
To go back to the previous command, say “Go back” or “Correctio\
n”.

If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit ww.InfinitiUSA.com/bluetooth.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Bluetooth® Controls
Microphone
SETTINGS
The setting mode allows you to change the information displayed in the v\
ehicle
information display:
Driver Assistance (if so equipped)
Main Menu Selection Body Color Maintenance Alarms
Vehicle Settings
Language Unit Welcome Effects
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2510/9/13 11:09 AM

system guide
Bluetooth® System without Navigation (if so equipped)
CONNECTING PROCEDURE
1.

Press the button on the steering wheel. The
system announces the available commands.
2.


Say “Connect Phone”. The system acknowledges
the command and announces the next set of
available commands.
3.


Say “Add Phone”. The system acknowledges
the command and asks you to initiate
connecting from the phone handset.
4.


Initiate connecting from the phone.
•


The

connecting procedure varies according to each cellular phone model. For detailed




connecting instructions and a list of compatible phones, please visit



www.InfinitiUSA.com/bluetooth
.
•

When

prompted for a PIN code, enter “1234” from the handset. (The PIN code is




assigned by INFINITI and cannot be changed.)
5.


Say the name of the phone when the system asks
you to provide one. y ou can give the
phone a name of your choice.
PHONEBOOK
Depending on the phone, the system may automatically download the entir e phonebook.
For more information, please visit www.InfinitiUSA.com/bluetooth or the phone’s user guide.
If the phonebook does not download automatically, 40 entries can be indi\
vidually downloaded.
To manually download entries:




1.

Push the button on the steering wheel.



2.


After the tone, say “Phonebook”.




3.


After the next tone, say “Transfer Entry”.

4.


Using the phone, select an entry to send to the vehicle. Please consult \
the website
above or your phone’s User Guide for specific steps of the phone.



5. The system will speak the transferred entry. Confirm the entry by saying\
“
y es” after
the tone.
26
1591599_14b_Infiniti_QX60_QRG_100913.indd 2610/9/13 11:09 AM

27
MAKING A CALL B
y
PHONEBOOK ENTR
y

In some cases, names stored using all UPPERCASE letters may not be recog\
nized by the
voice recognition system.
1.


Press the button.
2.


After waiting for the tone, say “Call”.
3.


After the next tone, speak a name of a phonebook entry. For example “\
Michael Smith”.
4.


Confirm the correct name is recognized by saying “Dial” after the \
tone.
MAKING A CALL B

y PHONE NUMBER
1.


Press the button.
2.


After waiting for the tone, say “Call”.
3.


After the next tone, say “Phone Number”.
4.


After the next tone, say “123-456-7890”.
y ou may also say the digits in groups of 3, 3 and 4, respectively. To use\
this group dialing
method, say only the first 3 digits of the phone number instead of all 1\
0 digits. After the
system recognizes the digits, it will request the next 3 digits and fina\
lly the last 4 digits.
5.


After the system speaks the correct number and sounds the tone, say “\
Dial.”
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering wheel.
To reject the call, press the
button.

To hang-up, press the
button.
Bluetooth System with Navigation (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting



the phone.


1. Press the SETTING button on the instrument
panel and select the “Bluetooth” key on the
display.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2710/9/13 11:09 AM

system guide
2. Select the “Connect Bluetooth” key.


3.
A popup box will appear on the screen, prompting
you to confirm that the connection is for the phone
system. Select the “

y es” key.
4.


Initiate connecting from the phone.
The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
5.


When connecting is complete, the screen will return
to
the Bluetooth settings screen.
PHONEBOOK SETUP
Depending on your cell phone, the system may automatically download you r cell phone’s



entire phonebook to the vehicle’s Bluetooth system.

If the phonebook does not download automatically, the vehicle phonebook
may be set for
up to 40 entries.
To manually download entries:
1.


Press the
button and select the
“Vehicle Phonebook” key.



2.


Select the “Add New” key at the top of the display.




There are different methods to input a phone




number. Select one of the following options:


• “Copy

from Call History” to save a number from



the Outgoing, Incoming or Missed Calls lists.


•
“Copy


from the Handset” to save a number
that has been downloaded from your handset
to the vehicle.
•



“Enter Number by Keypad” to input the

number and name manually.
28
1591599_14b_Infiniti_QX60_QRG_100913.indd 2810/9/13 11:09 AM

29
MAKING A CALL
To make a call, follow this procedure:
1.


Press the

button on the steering wheel. The
“Phone” menu will appear on the control
panel display.
2.


Select the “Vehicle Phonebook”
, “Call History”,



“Handset Phonebook” or “Dial Number” key.
3.


Select the desired entry from the list.
4.


Dialing begins when the entry is selected or when



the “OK” key is selected.
RECEIVING/ENDING A CALL
To accept the call, press the button on the
steering wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the
button or touch the
“Hang Up” key.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2910/9/13 11:09 AM

system guide
Navigation System (if so equipped)
01 Touch screen display.
02 Destination (DEST) – Press to enter a destination.
03 Information
(INFO) – Press to display the vehicle, traffic (if so equipped), weather \
(if so
equipped) or voice recognition information.
04 SETTING – Press to access the system settings.
05 Infiniti Controller

• ENTER Button – Press the ENTER button to select the highlighted item on the screen.
•
Center

Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust
the map scale.


•
Slide
the controller (push upward/downward/leftward/rightward) to select an item on
the screen, to adjust a setting or scroll the map in 8 directions.
06 ROUTE – Press to access guidance control functions such as guidance cancel\
lation, route
priority or waypoint setting on the route.
07 MAP – Press to display the map. While following a programmed route, pres\
s multiple times
to change the type of route information.
08 STATUS – Press multiple times to display audio information, the air conditioner status,
fuel economy or navigation directions.
01
020304
0908
1110
0706
05
30
1591599_14b_Infiniti_QX60_QRG_100913.indd 3010/9/13 11:09 AM