2014 INFINITI QX60 Quick Reference Guide

15
REVERSE TILT-DOWN FEATURE (if so equipped)
The
reverse tilt-down feature will turn the selected outside mirror surface\
downward to
provide better rear visibility close to the vehicle.



1.

Apply the brake.




2.

Push the ignition switch to the
ON position.



3.

Move the shift lever to the
R (REVERSE) position.



4.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01.



5.


The outside mirror surfaces move downward.


The outside mirror surfaces will return to their original positions when\
one of the following
conditions has occurred:

• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch
START/STOP button to
start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 1510/9/13 11:09 AM

first drive features
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license
plate and instrument panel lights. Turn the switch to
the
position
02 to turn on the headlights.
AUTOLIGHT S
y
STEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when
it is light. The system will keep the headlights on for a period of time\
after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AUTO
position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01 or
position
02.
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position
to select the low beam. The blue indicator light
will extinguish.
Pull and release the headlight control switch 05
to flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
03
04
06
01
05
02
16
1591599_14b_Infiniti_QX60_QRG_100913.indd 1610/9/13 11:09 AM

17
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIST) — One sweep operation of the
front wipers.
02 Auto (A UTO ) — Operates the speed-sensing
and rain-sensing (if so equipped) front
wipers intermittently. The intermittent speed
can be adjusted by twisting the time control
ring
03 to increase or decrease wiper speed

or sensitivity
04 Low (LO) — Front wipers operate at a
continuous low-speed.
05 High (HI) — Front wipers operate at a
continuous high-speed.
06 Pull the lever toward you to activate the
front washer. The front wipers will operate
several times.
RAIN-SENSING AUTO WIPER S
y STEM (if so equipped)
The rain-sensing auto wiper system can automatically turn on the wipers \
an d adjust the
wiper speed depending on the rainfall and the vehicle speed.
To set the rain-sensing auto wiper system, push the lever down to the AUTO
position
02.
The wiper will sweep once while the ignition switch is in the ON position.
The rain sensor sensitivity level can be adjusted by turning the time co\
ntrol ring
03 toward
the front or toward the rear.
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) — Rear wiper operates
intermittently.
08 Low (ON) — Rear wiper operates at a
continuous low-speed.
09 Push the lever forward to activate the
rear washer. The rear wiper will operate
several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
MIST
OFFAUTO LO
HI
INT
ON
01
02
04
06
07
08
05
09
03
1591599_14b_Infiniti_QX60_QRG_100913.indd 1710/9/13 11:09 AM

first drive features
Automatic Climate Controls
01 AUTO BUTTON
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (autom\
atic cooling
and/or dehumidified heating), air flow distribution and fan speed.
02 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
03 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up for warmer air or down
for
cooler air.
04 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow control button to manually control the driver’s side
air flow modes.
The following air flow indicator modes will display on the control panel\
display screen:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
05 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passen\
ger’s side
temperature control buttons up
for warmer air or down
for cooler air.
06 DUAL BUTTON

Press the
DUAL button to turn the passenger’s side temperature controls on or off. T\
his
will allow the passenger’s side temperature to be adjusted independen\
tly from the driver’s
side by pressing the passenger’s side temperature control buttons.
07 FAN SPEED CONTROL BUTTONS
Press the left button to decrease the fan speed or press the right button to increase

the fan speed.
0406
0809120701101102
0305
18
1591599_14b_Infiniti_QX60_QRG_100913.indd 1810/9/13 11:09 AM

19
Rear Climate Controls
To activate the system:



1.
Press the REAR button

01 on the front control panel until Rear Air-conditioning screen
is displayed.
•

The

indicator

light

will

illuminate.
08 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button to turn the system on. The A/C automatically
turns on when the defroster mode is selected. This feature removes humid\
ity from
the air.
To defrost the front and side windows, set the temperature controls 03 and fan
speed controls 07 to their maximum settings.
09 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off. This function automatically turns off after approximately 15 minutes.
10 REAR AIR CONDITIONER To control the rear automatic air conditioning

system with the front air conditioner control
panel, press the REAR button.
When the rear automatic air conditioning system
is on, the indicator light on the
REAR button will
illuminate and the front display will switch to the
rear air conditioner screen. Use the driver
temperature and fan speed buttons to adjust settings.
To adjust the front air conditioning system, press the REAR button again.
To turn off the rear automatic air conditioning system from the front co\
ntrols, press
the REAR button until the Rear Air-conditioning screen is displayed. Then press the
OFF button.
The rear control buttons will not function when Rear Air-conditioning screen is shown
on the front display.
11 INTAKE AIR CONTROL BUTTON
Press the intake air control button to recirculate interior air inside the vehicle. The
indicator light on the button will illuminate. This system is used to a\
void certain
outside odors and helps to adjust the inside vehicle temperature more ef\
fectively.
The air recirculation mode cannot be activated when the climate control \
sys tem is in the
front defrost mode
or front defrost and foot vent mode
.
Press the intake air control button again to change the air circulation from the
intake air to the outside air. The
indicator light on the button will turn off.
12 OFF BUTTON Press the
OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 1910/9/13 11:09 AM

first drive features
0201
030506
04
FM/AM/SiriusXM®* Satellite Radio with CD/DVD Player (if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the
VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the
TUNE/FOLDER/AUDIO knob left or right.
03 SEEK•CAT/TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, pres\
s th
e or
end of the SEEK•CAT/TRACK button.
For satellite radio, press the or end of the SEEK•CAT/TRACK button to switch
to the first channel of the previous or next category.
To change tracks on a CD, press the or end of the SEEK•CAT/TRACK button.
To fast forward or rewind a track on a CD, press and hold the or end of the
SEEK•CAT/TRACK button.
01
02
05
0304
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional\
satellite radio subscription service.20 •
The
Fan Speed, Temperature, AUTO, and OFF buttons will now control the Rear
Air-conditioning system.


2.
Press the
REAR button

01 again, and the screen
will return to what was previously displayed.
•


The


indicator

light

will

stay illuminated to
indicate that the Rear Air-conditioning system
is active.
OFF button
02 — Turns off the rear climate control
system, and
REAR button indicator light.
Fan speed control buttons 03 — Press
or
to increase or decrease fan speed.
Temperature increase and decrease buttons 04 —
Adjusts the rear temperature up or down
.
AUTO button
05 — System automatically works
to keep air flow and fan speed at a
constant temperature.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2010/9/13 11:09 AM

21
USB/iPod® Interface
The USB jack 01 is located in the center console
under the arm rest.
When a compatible USB memory device or
iPod® is plugged into the USB jack, compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the CRUISE

ON/OFF

switch
01. The
CRUISE
indicator light in



the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch
02
and release. The SET indicator light
in the instrument panel will illuminate. Take your foot
off the accelerator pedal.
y
our vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03. When the



vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02. Release the



switch when the vehicle slows to the desired speed.
0102
03
04
01
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eigh\
teen for
satellite radio.
To store a station in a preset, you must first select a radio band by pr\
essing the
FM•AM


05 or XM
06 button, then tune to the desired FM, AM or XM satellite radio station.
Then press and hold the desired station preset button
(1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indic\
ator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the pr\
eset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your
Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 2110/9/13 11:09 AM

first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,



press the
CRUISE ON/OFF button
01 for less than 1.5
seconds. The
CRUISE indicator light
02 will illuminate.
Accelerate to the desired speed.
Push down on the
COAST/SET switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
Wh en a vehicle is not detected ahead of you in



the lane, the set distance and set vehicle speed




indicator lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,



the vehicle ahead detection, set distance, and set



vehicle speed indicator lights will illuminate 06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES
switch
07. When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET
switch
03. Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the
CRUISE ON/OFF button
01. The CRUISE indicator light

02, in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF
button 01
and hold it down for more
than 1.5 seconds. The
CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.



Cruise control will be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off\
, a nd then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
0403
0708
0205
06
To cancel the preset speed, push the CANCEL switch
04.
To turn off cruise control, push the CRUISE
ON/OFF switch
01. Both the
CRUISE indicator
light
and the

SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
22
1591599_14b_Infiniti_QX60_QRG_100913.indd 2210/9/13 11:09 AM