13
Power Seat Adjustments
To slide the seat forward or backward, push the
control switch 01 forward or backward.
To recline the seatback, push the switch
02
forward or backward.
SEAT LIFTER
To raise o r lower the front portion or height of the
seat,
push the front or back end of the switch
01 up or down.
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the swi\
tch 03.
For more information, refer to the “Safety — seats, seat belts and supplemental restraint system (se\
ction 1)” of your
Owner’s Manual.
2ND Row Seats
To slide the seat forward or backward, pull the
center of the bar 01 up and hold it while you slide
the seat forward or backward to the desired
position. Release the bar to lock the seat
in position.
To recline the seatback, pull up on the recline handle
02 and lean back. To bring the seatback forward, pull
the lever up and lean your body forward. Release the
lever to lock the seatback in position.
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
This feature is not available on driver’s side of 2nd row seat.
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row
can be accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever 03.
EZ ENTR
y
MODE
To enter the 3rd row from outside the vehicle, lift up on fully the seatback lever
03. This will release the back of the seat and fold up the seat cushion.
For access to the rear seat slide the entire seat forward
by pushing on the upper seatback area.
To return the seat to a locked position, push the upper seatback
rearward until the seatback and track are locked. Push the seat
cushion down. Locking the seatback will also lock the track.
For more information, refer to the “Safety — seats, seat belts and supplemental restraint system (se\
ction 1)”
of your Owner’s Manual.
010203
0102
03
1591599_14b_Infiniti_QX60_QRG_100913.indd 1310/9/13 11:09 AM
