2014 INFINITI QX60 ignition

4
new system features
Start from any Control Panel screen
Press
Press
Press
Press
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped)
With the ignition switch in the ON position, the



Around View Monitor is activated by pressing the

CAMERA

button
01, located on the control panel,



or by moving the shift lever to the
R (REVERSE)



position. The control panel displays various views




of the position of the vehicle.

When the shift lever is in the P (PARK), N (NEUTRAL)
or D (DRIVE)

position and the CAMERA button
01 is
pressed, the following views will display in order:
01
Front wide view Front view & bird’s-eye viewFront view & front-side view
1591599_14b_Infiniti_QX60_QRG_100913.indd 410/9/13 11:08 AM

7
3rd Row Power Folding Seats
The 3rd row seats can be folded flat for maximum
cargo hauling or extra storage space.
Before folding down the 3rd row seats:

•
The vehicle’s shift lever must be in the
P (PARK)
position or the N (NEUTRAL) position.
MANUAL SEAT FOLD DOWN
To fold the 3rd row seats flat:



1.

Pull the strap to release the head restraint
forward
01.



2.


Stow the 3rd row seat belts in the seat belt hooks
found in the cargo area
02.



3.


Pull up on the latch located on the corner of each

seatback and lower the seatback forward over the
seat base
03.
POWER UNFOLDING SEAT
When the ignition is in the OFF position, the power
unfolding seats are always operational.
If the ignition switch is in the ON position the power
unfolding seats are only operational when the shift
lever is in the P (PARK) or N(NEUTRAL) position.
To return the 3rd row seats to the upright position:



1.

Push and hold the switch. The seatback will rise

up while holding the switch.
A chime will sound once to indicate the start of the operation.
A warning chime will sound continuously if the seat is not in full uprig\
ht or folded position
when the ignition switch is placed in the
ON position.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (sectio\
n 1) ” of your
Owner’s Manual.
01
02
03
1591599_14b_Infiniti_QX60_QRG_100913.indd 710/9/13 11:09 AM

8
essential information
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A Tire Pressure Low – Add Air warning message
will appear in the vehicle information display
01
and the low tire pressure warning light 02 will
illuminate when one or more tires are low on
pressure and air is needed.
•
The tire pressures should be checked when the


tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more
or driven less than 1 mi (1.6 km) at
moderate speeds.
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tires to the
recommended COLD tire pressure.
To use the tire inflation indicator:
1.


Move the shift lever to the
P (PARK) position and apply the parking brake.
2.


Place the ignition switch in the
ON position. Do not start the engine.
3.


Add air to the under-inflated tire and within a few seconds, the hazard \
warning lights will
start flashing.
4.


When the designated tire pressure is reached, the horn will beep once an\
d the hazard
warning flashers will stop flashing.
5.


Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 \
MPH (25 km/h).
The Tire Pressure Low – Add Air warning message and low tire pressure warning light
will disappear.
When the low tire pressure warning light flashes for approximately 1 min\
ute and then
remains on, the TPMS is not functioning properly. Have the system checke\
d by an
INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicl\
e’s operation and
the outside temperature. Low outside temperature can lower the temperatu\
re of the air
inside the tire, which can cause a lower tire inflation pressure. This m\
ay cause the low
tire pressure warning light to illuminate. If the warning light illumina\
tes, check the tire
pressure in your tires.
•
Check

the tire pressure (including the spare tire) often and always prior to long

distance trips.
The Tire and Loading Information label contains valuable information. Pl\
ea se refer to
section 9, “Technical and consumer information” in your Owner’s\
Manual for the location
of the Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
01
02
1591599_14b_Infiniti_QX60_QRG_100913.indd 810/9/13 11:09 AM

11
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock or unlock your
vehicle, open your liftgate and remotely start the engine. It is importa\
nt to
make sure the Intelligent Key is with you (that is, in your pocket or p\
urse).
REMOTE ENGINE START* (if so equipped)
The remote engine start system must be enabled in the vehicle
settings within the vehicle information display.
The remote engine start operating range is approximately 200 ft (60 m)\

from the vehicle. The effective operating range may be shorter due to
environmental conditions or obstacles between you and the vehicle.
For the remote engine start to function, the vehicle must be in
the P (PARK) position with the ignition off, and all the doors closed
and locked.
To start your vehicle remotely:



1.

Press the button
01
2. Within 5 seconds press and hold the remote engine start
button
02 for at least
2 seconds.
The engine will start and the parking lights will turn on.
Automatic climate control will begin heating or cooling the vehicle depe\
nding on the last
used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10 minute peri\
od.

•
After
two remote starts the ignition switch must be cycled before the remote start can be
used again.
To start driving depress the brake pedal and push the ignition switch START/STOP button.
LOCKING AND UNLOCKING THE VEHICLE
The lock and unlock operating range of the
Intelligent Key is within 31.5 in (80 cm) from
each request switch.
To lock the vehicle, push either door handle



request switch 03 once or press the
button
01
on the key fob.
To unlock the vehicle, perform one of the following procedures:

•
Push
either door handle request switch
03 once; the corresponding door will unlock.
Push the door handle request switch again
within 30 seconds; all other doors
will unlock, or
• Press

the
button
04 on the key fob to unlock the driver’s side door. Press the



button

again;

all

other

doors

will

unlock.
*Laws in some communities may restrict the use of remote starters. Check\
local regulations before using this feature.
02
01
04
05
06
03
1591599_14b_Infiniti_QX60_QRG_100913.indd 1110/9/13 11:09 AM

LIFTGATE RELEASE
To open the rear liftgate, press the button
05 for longer than 1 second.
To close the rear liftgate, press the
button
05 again for longer than 1 second.
PANIC ALARM
The Intelligent Key can also be used to activate the panic alarm by pres\
sing and holding
the
button
06 for more than 1 second. Once activated, the panic alarm and headlights \
will stay on for a period of time.
INTELLIGENT KE
y
BATTER y DISCHARGE
If the battery of the Intelligent Key is discharged,
or environmental conditions interfere with the
Intelligent Key operation, start the engine according
to the following procedure:
1.


Move the shift lever to the
P (P ARK ) position.



2.

Firmly apply the foot brake.




3.

Touch the ignition switch with
the Intelligent
Key and a chime will sound.



4.

Within 10 seconds after the chime sounds, push the ignition switch while\
depressing
the

brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
12
first drive features
Power Liftgate
When the liftgate is closed and locked, the
liftgate will open automatically by:

•
Pushing the power liftgate switch
01 on the instrument panel.
•
Pushing the liftgate opener switch 02, the
liftgate must be unlocked, or you must have the
Intelligent Key with you (in your pocket or purse).
•


Pressing the
button
03 on the INFINITI
Intelligent Key for more than 1 second.
The power liftgate operation can be
turned on or off by the power liftgate main
switch
04 on the instrument panel.


•
When the power liftgate main switch is pushed

to the OFF position, power operation is not
available using the power liftgate switch on the
liftgate
05 or the liftgate opener switch
02.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
0401
02
05
03
1591599_14b_Infiniti_QX60_QRG_100913.indd 1210/9/13 11:09 AM

first drive features
3RD Row Manual Reclining Seatback
To recline the seatback, pull up on the latch 01
located on the outside corner of each seatback.




Lean back until the desired angle is obtained.


To bring the seatback forward again, pull up on the
latch
01 and move your body forward. The
seatback will move forward.
For more information, refer to the “Safety — seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column



and outside mirrors can be stored in the automatic



drive positioner 01 memory.
Follo
w these procedures to set the
memory positions:


• Confirm the shift lever is in the P (PARK) position.
• Push
the ignition switch to the ON position.
• Adjust
the driver’s seat, steering column and



outside mirrors to the desired positions using the



adjusting switches for each feature.


•
Push
the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The
indicator light on the memory switch you select will illuminate for approximately




5 seconds, and a chime will sound (if so equipped) when memory is stor\
ed correctly.


• The driver’s seat, steering column and outside mirror positions are now set to




your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
control switch
01 right or left.
Adju
st each mirror to the desired position using
the switch
02.
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the
outside rearview mirrors, push the switch
03 to
the
position.
02
01
03
01
01
14
1591599_14b_Infiniti_QX60_QRG_100913.indd 1410/9/13 11:09 AM

15
REVERSE TILT-DOWN FEATURE (if so equipped)
The
reverse tilt-down feature will turn the selected outside mirror surface\
downward to
provide better rear visibility close to the vehicle.



1.

Apply the brake.




2.

Push the ignition switch to the
ON position.



3.

Move the shift lever to the
R (REVERSE) position.



4.

Choose the right or left outside mirror by operating the outside mirror \
control switch 01.



5.


The outside mirror surfaces move downward.


The outside mirror surfaces will return to their original positions when\
one of the following
conditions has occurred:

• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch
START/STOP button to
start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1591599_14b_Infiniti_QX60_QRG_100913.indd 1510/9/13 11:09 AM

first drive features
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license
plate and instrument panel lights. Turn the switch to
the
position
02 to turn on the headlights.
AUTOLIGHT S
y
STEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when
it is light. The system will keep the headlights on for a period of time\
after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AUTO
position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01 or
position
02.
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position
to select the low beam. The blue indicator light
will extinguish.
Pull and release the headlight control switch 05
to flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
03
04
06
01
05
02
16
1591599_14b_Infiniti_QX60_QRG_100913.indd 1610/9/13 11:09 AM