Page 65 of 518

64Safe Driving
Exhaust Gas HazardCarbon Monoxide GasThe engine exhaust from this vehicle contains carbon monoxide, a colorless, 
odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon 
monoxide gas will not get into the interior.■Have the exhaust system inspected for leaks whenever
•The exhaust system is making an unusual noise.
•The exhaust system may have been damaged.
•The vehicle is raised for an oil change.
When you operate a vehicle with the trunk open, airflow can pull exhaust gas into 
the interior and create a hazardous condition. If you must drive with the trunk open, 
open all the windows and set the climate control system as shown below.
1.Select the fresh air mode.
2.Select the   mode.
3.Set the fan speed to high.
4.Set the temperature control to a comfortable setting.
Adjust the climate control system in the same manner if you sit in your parked 
vehicle with the engine running.
1Carbon Monoxide Gas
An enclosed area such as a garage can quickly fill up 
with carbon monoxide gas.
Do not run the engine with the garage door closed. 
Even when the garage door is open, drive out of the 
garage immediately after starting the engine.
3
WARNING
Carbon monoxide gas is toxic.
Breathing it can cause unconsciousness and 
even kill you.
Avoid any enclosed areas or activities that 
expose you to carbon monoxide. 
         
        
        
     
        
        Page 66 of 518
65Safe Driving
Safety LabelsLabel LocationsThese labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels 
carefully.
If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact a dealer 
for a replacement.
Radiator CapDashboardDoorjambs Sun Visors
U.S. models Canadian models
U.S. models Canadian models U.S. models only 
         
        
        
     
        
        Page 67 of 518
        
        
        
     
        
        Page 68 of 518
67
Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used while driving.
Indicators............................................ 68
Multi-Information Display Warning and 
Information Messages ...................... 84
Gauges and Multi-Information Display... 94
Gauges .............................................. 94
Multi-Information Display .................. 95 
         
        
        
     
        
        Page 69 of 518
68Instrument Panel
Indicators*1:On the left: Models with navigation system
On the right: Models without navigation systemIndicator
Name
On/Blinking
Explanation
Message
*1
Brake System 
Indicator (Red)
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when the brake fluid level 
is low.●Comes on if there is a problem with 
the brake system.
●Comes on while driving - Check the 
brake fluid level.
2What to do when the indicator 
comes on while driving P. 482
●Comes on along with the ABS 
indicator - Have the vehicle checked by 
a dealer.
2If the Brake System Indicator (Red) 
Comes On P. 482
Low Oil 
Pressure 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.●Comes on when the engine oil 
pressure is low.
●Comes on while driving - 
Immediately stop in a safe place.
2If the Low Oil Pressure Indicator 
Comes On P. 481
U.S.Canada(Red) 
         
        
        
     
        
        Page 70 of 518

69
uuIndicatorsu
Continued
Instrument Panel
*1:On the left: Models with navigation system
On the right: Models without navigation systemIndicator
Name
On/Blinking
Explanation
Message
*1
Electric 
Parking Brake 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when the parking brake is 
applied, and goes off when it is 
released.
●Blinks and the electric parking brake 
system indicator comes on at the 
same time - There is a problem with 
the electric parking brake system. The 
parking brake may not be set.
2Parking Brake P. 384
Electric 
Parking Brake 
System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on if there is a problem with 
the electric parking brake system.
●Comes on while driving - Avoid using 
the parking brake and have the vehicle 
checked by a dealer immediately.
2If the Electric Parking Brake System 
Indicator Comes On P. 483
Automatic 
Brake Hold 
System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when the automatic 
brake hold system is on.
2Automatic Brake Hold P. 387
U.S.Canada 
         
        
        
     
        
        Page 71 of 518
70
uuIndicatorsu
Instrument Panel
*1:On the left: Models with navigation system
On the right: Models without navigation systemIndicator
Name
On/Blinking
Explanation
Message
*1
Automatic 
Brake Hold 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on when the automatic 
brake hold is activated.
2Automatic Brake Hold P. 387
—
—
Brake System 
Indicator 
(Amber)
●Comes on for a few seconds when 
you set the power mode to ON, then 
goes off.●Comes on if there is a problem with 
a system related to braking other 
than the conventional brake system.●Comes on if there is a problem with 
hydraulic brake boost system.
●Comes on while driving - Have the 
vehicle checked by a dealer.●With this indicator on, your vehicle still 
has normal braking ability.
U.S.CanadaU.S.Canada(Amber)
U.S.Canada
U.S.Canada 
         
        
        
     
        
        Page 72 of 518

71
uuIndicatorsu
Continued
Instrument Panel
*1:On the left: Models with navigation system
On the right: Models without navigation systemIndicator
Name
On/Blinking
Explanation
Message
*1
Malfunction 
Indicator Lamp
●Comes on when you set the power 
mode to ON, and goes off either 
when the engine starts or after 
several seconds if the engine is not 
started. If “readiness codes” have 
not been set, it blinks five times 
before it goes off.●Comes on if there is a problem with 
the emissions control system.●Blinks when a misfire in the engine’s 
cylinders is detected.
●Readiness codes are part of the on 
board diagnostics for the emissions 
control systems.
2Testing of Readiness Codes P. 501
●Comes on while driving - Have the 
vehicle checked by a dealer.●Blinks while driving - Stop in a safe 
place where there are no flammable 
objects. Stop the engine for 10 minutes 
or more, and wait for it to cool down. 
Then, take the vehicle to a dealer.
2If the Malfunction Indicator Lamp 
Comes On or Blinks P. 482
Charging 
System 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when the 
engine starts.●Comes on when the battery is not 
charging.
●Comes on while driving - Turn off the 
climate control system and rear 
defogger in order to reduce electricity 
consumption.
2If the Charging System Indicator 
Comes On P. 481