2014.5 Citroen C4 DAG automatic transmission

1111
218 
C4-2_en_Chap11_info-pratique_ed01-2014
F On the  front  bumper ,  unclip  the  cover by
  pressing   at   the   bottom.
F
 
Screw
  the   towing   eye   in   fully.
F
 
Install
  the   towing   bar.
Towing your vehicle
F Place the  gear  lever  in  neu -
tral (position N on an elec-
tronic
  or   automatic   gearbox).
Failure to observe this in

-
struction
 
could
 
result
 
in
 
dam
-
age
 
to
 
certain
 
components
 
(braking,

 
transmission...)
 
and
 

the

 
absence
 
of
 
braking
 
as
-
sistance
 
the
 
next
 
time
 
the
 
engine

  is   started. F
 
On
 
the
 
rear
 
bumper
,  
unclip
 
the
 
cover by

  pressing   at   the   bottom.
F
 
Screw
  the   towing   eye   in   fully.
F
 
Install
  the   towing   bar.
F
 
Switch
 
on
 
the
 
hazard
 
warning
 
lamps
 
on

  both   vehicles.
F
 
Move
 
of
f  
gently
,  
drive
 
slowly
 
and
 
for
 
a

  short   distance.
Towing another vehicle
F Unlock the  steering  by  turning  the  key
 in  the  ignition  one  notch  and  re -
lease
  the   parking   brake.
F
 
Switch
 
on
 
the
 
hazard
 
warning
 
lamps
 
on

  both   vehicles.
F
 
Move
 
of
f  
gently
,  
drive
 
slowly
 
and
 
for
 
a

  short   distance.
PRACTICAL INFORMATION

05
258
C4-2_en_Chap13b_RT6_ed01-2014
TRAFFIC INFORMATION
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RADIO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.

04
298
C4-2_en_Chap13c_RD5_ed01-2014
RDS, if displayed, enables you to continue listening to the same station by  automatic   retuning   to   alternative   frequencies.   However,   in   certain conditions,

  coverage   of   an   RDS   station   may   not   be   assured   throughout
 the

  country   as   radio   stations   do   not   cover   100   %   of   the   territory.  
This explains

  the   loss   of   reception   of   the   station   during   a   journey.
AUDIO
RDS
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic  
report

  is   transmitted,   the   current   audio   source   (Radio,   CD,  
USB,

  ...)   is   interrupted   automatically   to   play   the  
T
A
 
message.  
Normal

  playback   of   the   audio   source   resumes   at   the   end   of   the  
transmission

  of   the   message.
Press TA INFO
 

to   activate   or   deactivate  
the

  reception   of   traffic   messages.
When
  the   radio   is   displayed   on   the  
screen, press

OK   to   display   the  
contextual

  menu.
Select "RDS"   and   confirm   to   save.
"RDS"   is   displayed   in   the   screen.
Make   a   long   press   on  
T
A INFO
to
display   the   list   of   categories.
Receiving INFO messages
The INFO
 function  gives  priority  to  T A alert  messages.  T o  be  active,
 this  function  needs  good  reception  of  a  radio  station  that  
transmits

 
this
 
type
 
of
 
message.
 
When
 
a
 
message
 
is
 
transmitted,
 
the

 
current
 
audio
 
source
 
(Radio,
 
CD,
 
USB, 
...)  
is
 
interrupted
 
automatically

 
to
 
receive
 
the
 
INFO
 
message.
 
Normal
 
play
 
resumes
 
at

 
the
 
end
 
of
 
the
 
message
 
transmission.
Select

  or   deselect   categories   to   activate  
or

  deactivate   the   reception   of   the  
corresponding

  messages.