33
62
C4-2_en_Chap03_confort_ed01-2014
REAR SEATS
Bench seat with fixed one-piece cush -
ion and split backrest (left hand 2/3, right hand
1/3)
which
can
be
folded
individually to
adapt the load space in the boot.
Rear head restraints
These have one position for use (up)
and a stowed position (down).
They
can also be removed.
To
remove a head restraint:
F
release
the backrest using control 1,
F
tilt
the backrest 2 slightly forwards,
F
pull
the
head
restraint
upwards
to
the stop,
F
then,
press the lug A.
Never
drive
with
the
head
re
-
straints
removed;
they
must
be
in
place and correctly adjusted.When
repositioning
the
seat
backrest,
take
care
not
to
trap
the
seat belts.
Folding the backrest
F Move the corresponding front seat forward
if necessary.
F
Position the seat belt between the
outer
and
centre
head
restraints
to
avoid
trapping
the
belt
when
reposi
-
tioning
the seat backrest.
F
Place
the
head
restraints
in
the
low
position.
F
Pull control 1
forwards
to
release
the
seat back 2.
F
Fold the seat back 2 on to the cushion.
Repositioning the seat backrest
F Straighten the seat back 2 and se -
cure it.
F
Check
that
the
red
indicator
,
located
next
to
the
control
1
,
is
no
longer
visible.
F
Put
the
seat
belt
back
in
place
on
the
side of the seat backrest.
COMFORT
77
C4-2_en_Chap04_ouvertures_ed01-2014
BOOT
Opening
F After unlocking the boot or the ve -
hicle using the remote control or the
key
,
press
the
opening
control,
then
raise
the tailgate.
Closing
F Lower the tailgate using the interior grab
handle.
F
If
necessary
,
press
down
on
the
tail
-
gate
to fully close it.
Tailgate release
System allowing the mechanical unlock -
ing of the boot in the event of a battery or central
locking system malfunction.
Unlocking
F
Fold
back
the
rear
seats
to
gain
access
to
the
lock
from
inside
the
boot.
F
Insert
a
small
screwdriver
into
hole
A
of
the lock to unlock the tailgate.
F
Move
the latch to the left.
If
the
tailgate
is
not
closed
correctly:
-
when
the engine is running,
this
warning
lamp
comes
on, accompanied
by
the
display of
an
alert
message
for
a
few seconds,
-
when the vehicle is moving
(speed above
6
mph
(10
km/h)),
this
warn
-
ing
lamp
comes
on,
accompanied
by an
audible
signal
and
the
display
of an
alert
message
for
a
few
seconds. Locking after closing
If
the
fault
persists
after
closing
again,
the
boot will remain locked.
4
ACCESS
88
128
C4-2_en_Chap08_securite_ed01-2014
The driver must ensure that passen -
gers use the seat belts correctly and
that
they
are
all
restrained
securely
before
setting off.
Wherever
you
are
seated
in
the
ve
-
hicle, always fasten your seat belt,
even
for short journeys.
Do
not
interchange
the
seat
belt
buckles
as
they
will
not
fulfil
their
role
fully
.
The
seat
belts
are
fitted
with
an
inertia
reel
permitting
automatic
adjustment
of
the
length
of
the
strap
to
your
size.
The
seat
belt
is
stowed
automatically
when
not in use.
Before
and
after
use,
ensure
that
the
seat
belt is reeled in correctly.
The
lower
part
of
the
strap
must
be
positioned
as
low
as
possible
on
the
pelvis.
The
upper
part
must
be
positioned
in
the
hollow of the shoulder.
The
inertia
reels
are
fitted
with
an
auto
-
matic
locking
device
which
comes
into operation in the event of a collision,
emergency
braking
or
if
the
vehicle rolls
over
.
Y
ou
can
release
the
device by
pulling
the
strap
firmly
and
then
re
-
leasing
it so that it reels in slightly.In
order to be ef fective, a seat belt must:
-
be
tightened
as
close
to
the
body
as possible,
-
be
pulled
in
front
of
you
with
a
smooth
movement,
checking
that
it
does not twist,
-
be
used
to
restrain
only
one
person,
-
not
bear
any
trace
of
cuts
or
fraying,
-
not
be
converted
or
modified
to
avoid
affecting its performance.
In
accordance
with
current
safety
regulations,
for
all
repairs
on
your
vehicle's
seat
belts,
go
to
a
qualified
workshop
with
the
skills
and
equip
-
ment
needed,
which
a
CITROËN
dealer
is able to provide.
Have
your
seat
belts
checked
regu
-
larly
by
a
CITROËN
dealer
or
a
qualified
workshop,
particularly
if
the
straps
show signs of damage.
Clean the seat belt straps with soapy
water
or
a
textile
cleaning
product,
sold
by CITROËN dealers.
After
folding
or
moving
a
seat
or
rear
bench seat, ensure that the seat belt
is
positioned and reeled in correctly.Recommendations for children
Use
a
suitable
child
seat
if
the
pas
-
senger
is
less
than
12
years
old
or
shorter
than one and a half metres.
Never
use
the
same
seat
belt
to
se
-
cure
more than one person.
Never
allow
a
child
to
travel
on
your
lap.
For
more
information,
refer
to
the
"Child
seats" section.
In the event of an impact
Depending on the nature and se-
riousness of the impact, the pre-
tensioning
device
may
be
deployed
before
and
independently
of
the
airbags.
Deployment
of
the
preten
-
sioners
is
accompanied
by
a
slight
discharge
of
harmless
smoke
and
a
noise,
due
to
the
activation
of
the
pyrotechnic
cartridge
incorporated
in
the
system.
In
all
cases,
the
airbag
warning
lamp
comes
on.
Following
an
impact,
have
the
seat
belts
system
checked,
and
if
neces
-
sary
replaced,
by
a
CITROËN
dealer
or
a qualified workshop.
SAFETY