2013 MERCEDES-BENZ SL-Class ESP

select
Phone by sliding
0012000Aand turning
003E0012003F the COMAND controller and press
0039 to confirm.
X Select Download Contacts and press
0039
to confirm.
Am enu appears.
X Select From The Memory Card or
From USB device in the menu by turning
003E0012003F
the COMAND controller and press 0039to
confirm.
X Select Add or
Overwrite and press
0039to
confirm.
Add imports the entries from the memory
card or USB device into the address book.
Overwrite imports the entries from the
memory card or USB device and overwrites
all entries in the address book with the
0015 symbol. The previous entries are then
no longer available.
After the contact data has been imported
successfully, you will see amessage to this
effect. The address book or the respective
telephone basic menu is displayed.
i You can select Overwrite if the address
book already contains corresponding
entries. Amessage notifies you when the
address book is full.
Receiving vCards via Bluetooth ®X
Select Address Book in the address book
or, if the telephone basic menu is shown,
select Phone by sliding
0012000Aand turning 003E0012003F
the COMAND controller and press
0039 to confirm.
Am enu appears.
X Select Import Contacts and press
0039to
confirm.
X Select Receive Contacts From Phone in
the menu by turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
This interrupts the Bluetooth ®
connection
between COMAND and your active mobile
phone. COMAND is, however, ready to
receive vCards from another Bluetooth ®
device (PC, mobile phone).
X Start the data transfer on the external
Bluetooth ®
device (see the operating
instructions for the device).
The number of vCards received is
displayed.
X To end reception: press0039or the 001F
back button.
COMAND then reconnects to the mobile
phone.
Received vCards are identified by the 001B
symbol in the address book.
i If you switch to another main function,
e.g. navigation, while receiving vCards, the
reception of vCards will be terminated.
Deleting contacts
X Select Address Book in the address book
or, if the telephone basic menu is shown,
select Phone by sliding
0012000Aand turning
003E0012003F the COMAND controller and press
0039 to confirm.
Am enu appears.
X Select Delete Contacts and press
0039to
confirm.
X Select one of the following options:
R
Internal Contacts R
Contacts From Storage Device 404
TelephoneCOMAND

R
Received Business Cards R
Delete All Ap
rompt corresponding to yours election
appears.
X Select Yes or
No and press
0039to confirm.
If you select Yes , the contacts are deleted
according to your selection.
If you select No , the process will be
canceled.
Switching importing of contacts on/off You can choose whether contacts are
automatically downloaded when a mobile
phone is connected to COMAND, or whether
the automatic download is suppressed.
Connecting a mobile phone (Y page 378)
X Select Phone in the telephone basic menu
by sliding 0012000Aand turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
Am enu appears.
X Select Import Contacts from and press
0039to confirm.
You can allow 0013or suppress 0003the
automatic download. Proceed as follows if you do not want to save
sensitive contacts in the address book:
X
Connec tthe mobile phone to COMAND.
Contacts are automatically downloaded to
the address book.
X Delete sensitive contacts in the address
book.
X Switch off the Import Contacts from function
0003.
The next time you connect your mobile
phone to COMAND, no more contacts will
be downloaded, not even newly-added
contacts.
Switching the display of contact details
(privacy) on/off
The Hide Data setting allows you to decide
whether telephone and address book data is
visible on the screen. You can therefore, for
example, prevent a passenger from seeing
the name of a caller.
Activating the function has the following
effects:
R The mobile phone's phone book and
address book data are hidden. They can
therefore not be used to make calls, send
text messages or to navigate.
You still have access to the phone book and
address book stored on COMAND.
R During incoming calls, the caller's name is
not displayed if there is an address book
entry for the number that is calling.
R During outgoing calls where the number is
entered manually, the recipient's name is
not displayed, even if there is an address
book entry for the entered number.
R The call list is hidden.
R Redialing is not possible.
R The received text messages list is hidden.
There is still a notification for incoming text
messages. For this to be the case, the
connected mobile phone must support the
MAP profile. However, it is not possible
that, for example, the passenger could see Telephone
405COMAND Z

i
Routes and destinations are
automatically deleted on the server after
seven days.
Conditions of use You can review the terms of use for the
Mercedes-Benz Apps from COMAND Online
and Google™.
X
Select Terms and Conditions in the
options menu by sliding 00380012000Athe COMAND
controller and press 0039to confirm
(Y page 414).
X Select Mercedes-Benz Apps or
Google and press
0039to confirm.
The respective start page appears.
X Select Continue to view further content.
Resetting adjustments With the reset function
,all Mercedes-Benz
Apps settings are reset to the factory
settings.
X Selec tthe 000C icon in the main function bar
by sliding 00380012and turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
The carousel view appears.
X Bring the Mercedes-Benz Apps panel to
the front by turning 003E0012003Fthe COMAND
controller and pressing 0039to confirm.
X Select Options by sliding
0012000Aand turning
003E0012003F the COMAND controller and press
0039 to confirm.
X Select Reset and press
0039to confirm.
Ap rompt appears asking whethe ryou
really wish to reset.
X Select Yes or
No and press
0039to confirm.
If you select Yes , the settings are reset.
If you select No , the process will be
canceled. Other services
Mercedes-Benz Mobile Website The COMAND functions include the
Mercedes-Benz Mobile Website as a
predefined favorite.
X
Select the 000Csymbol in the main function
bar by sliding 00380012and turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
The carousel view appears.
X Bring the Mercedes-Benz Mobile Website panel to the front by turning
003E0012003F the COMAND controller and pressing
0039 to confirm.
The Mercedes-Benz home page appears.
i You cannot delete the Mercedes-Benz Mobile Website panel.
Further Mercedes-Benz Apps You can call up additional Mercedes-Benz
Apps, such as Facebook, or Google™
services, such as Street View or Panoramio,
here.416
Online and Internet functionsCOMAND

Navigating the website
Overview
Action Result
X
Turn 003E0012003F the
controller. Navigates from one
item that can be
selected (e.g. link,
text field or
selectio
nlist) to the
nex tand highlights
the respective
element on the
website. Sliding the
controller:
X
Left or right 003600120037
X Up or down 00380012000A
X Diagonally 00340012003D Moves the pointer
on the page.
X
Press 0039the
controller. Calls up the menu or
opens the selected
item.
X
Press 001F. Calls up the
previous page.
X
Press 0011. Closes the Internet
browser. If several
windows are open,
the current window
is closed. Example
:highlighting an item that can be
selected X
Turn 003E0012003F the COMAND controller.
Ab utton is highlighted in the example.
Example: entering text X
Select an input line by turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
The characte rbar appears. Online and Internet functions
419COMAND Z

R
FM: CD quality sound
AM: analog FM station sound quality
R the display of text-based information
(e.g .artist, track name) in the display
For further information on HD Radio™, visit
http://www.hdradio.com .
Switching wavebands You can switch the radio between the FM, AM
and WB wavebands. 0002
Waveband submenu
X Option 1: press the0006function button
until the desired waveband is set.
i Repeatedly pressing this function button
switches through the wavebands in this
order: FM, AM, WB. You then call up
satellite radio mode. Pressing the button
again takes you back to FM radio mode.
X Option 2: selectFM ,
AM or
WB in the radio
display by sliding 0012000Aand turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
X The waveband submenu is opened.
X Select a waveband and press 0039to confirm.
You will heart he last station played on the
selected waveband. The 002Adot shows the
currently selected waveband. Selecting
astation Selecting stations vi
athe station search
function
X Press the 0001or0002 button.
or
X Turn 003E0012003F or slide 003600120037the COMAND
controlle rwhile the display/selection
window in the radio display is active.
Station search scans up or down and stops
at the next station found.
Selecting stations via the station presets
X Quick setting: press a number key, e.g.
002D.
X Directly in the station presets: select
Presets by sliding
0012000Aand turning 003E0012003F
the COMAND controller and press 0039to
confirm.
or
X When the display/selection window is
active, press 0039the COMAND controller.
The station preset memory appears. The
002A dot indicates under which preset the
currently selected station is stored.
X Select a station by turning 003E0012003Fand
pressing 0039to confirm or press a number
key, e.g. 002D.
Selecting stations by entering the
frequency manually
X Option 1: press the000Fbutton.
X Option 2: selectRadio in the radio display
by sliding 0012000Aand turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
X Select Enter Frequency and press
0039to
confirm.
Irrespective of the option chosen, an input
menu will appear.
X Enter a frequency using the number keys.
COMAND sets the frequency entered. 428
AudioCOMAND

Waveband Frequency
AM (MF) 530 – 1700 kHz
FM (VHF) 87.7 – 107.9 MHz
WB (Weather Band) Weather report
channels
i
You can only enter currently permitted
numbers.
i If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND sets the next lower
frequency.
Storing astation Storing stations manually
There are ten presets available for the FM and
AM wavebands. Example: station memory
X
Quick save: press and hold a numbe rkey,
e.g. 002D, until you hear a tone.
The station is stored.
X Directly in the station presets: press0039
the COMAND controller when the display/
selection window is active.
or
X Select Presets by sliding
0012000Aand turning
003E0012003F the COMAND controller and press
0039 to confirm.
In both cases, the station presets appear.
The 002Adot indicates under which preset
the currently selected station is stored. X
Select a preset by turning 003E0012003Fthe
COMAND controller and press and hold
0039 until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found,
beginning with preset 1. When the highest
frequency is reached or 10 stations have
been found, the storing process ends. Any
stations stored manually under the presets
will be lost. COMAND may not occupy all
memory slots when storing.
X Option 1: press0039the COMAND controller
when the display/selection window is
active.
The station preset memory appears.
X Option 2: selectPresets by sliding
0012000A
and turning 003E0012003Fthe COMAND controller
and press 0039to confirm.
The station preset memory appears.
X Irrespective of the option, select
Autostore and press
0039to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available
stations are automatically stored in the
preset positions.
X To cancel storing: selectCancel and
press 0039to confirm.
Weather Band Activating
X
Press the 0006function button repeatedly
until the Weather Band is switched on.
or
X Select the currently set waveband FM or
AM by sliding
0012000Aand turning 003E0012003Fthe Audio
429COMAND Z

Entering channel numbers directly
X
Option 1: press the000Fbutton.
An input menu appears.
X Option 2: selectSat in the submenu bar
by turning 003E0012003Fthe COMAND controller
and press 0039to confirm.
X Select Enter Channel and press
0039to
confirm.
An input menu appears.
Entering the channel
X With both options, press the corresponding
number buttons on the control unit in
succession.
COMAND sets the selected channel.
i You can only selec tcurrently permitted
digits. Selecting a channel from the SatRadio
channel list
You can select the channel from the channel
list (option 1) or via the channel list that
shows the artists and tracks that are currently
being played (option 2).
X Select Sat in the submenu bar by turning
003E0012003F the COMAND controller and press
0039 to confirm.
Option 1
X Select Channel List and press
0039to
confirm.
The channel list appears.
X Select a channel by turning 003E0012003Fthe
COMAND controller and press 0039to
confirm. Option 2
X
Select Channel List with Artist, Title and press
0039to confirm.
The channel list appears and displays the
artists and tracks currently being played. X
Select a channel by turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
Memory functions Channel presets
There are te
npresets available.
Storing channels
X Press 0039the COMAND controller when the
display/selectio nwindow is active.
or
X Select Presets in the submenu bar by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
In both cases, the channel presets appear.
The 002Adot in front of a preset entry
indicates that the currently selected
channel is stored under this preset. 434
AudioCOMAND

COMAND controller and press
0039to
confirm.
The media list appears. The 0021dot indicates
the curren tmedium being played.
The media list shows the discs currently
available.
View in 0002:
R 0002 magazine tray not shown
R 0003 magazine tray show
X To change the display: select1...6 Changer by turning
003E0012003Fthe COMAND
controller and press 0039to confirm.
Depending on the previous setting, the
magazine trays are shown or not shown.
i If a disc cannot be read, an entry appears
next to the corresponding magazine tray. Media list showing all magazine trays
X
Select the data medium by turning 003E0012003F
the COMAND controller and press 0039to
confirm.
The following tables list the selection options
in the media list for the respective equipment
variants. For DVD changer
Magazine trays, positions
1to 6: readable
data media are audio CDs, MP3 CDs or MP3
DVDs, audio DVDs and video DVDs. Memory card, position 7
MUSIC REGISTER, position 8
USB storage device, position 9 For DVD changer
Media Interface, position 0
Bluetooth
®
audio Equipped with a single DVD drive
DVD drive, position 1: readable data media
are audio CDs, MP3 CDs or MP3 DVDs,
audio DVDs and video DVDs.
Memory card, position 2
MUSIC REGISTER, position 3
USB storage device: position 4
Media Interface: position 5
Bluetooth
®
audio: position 6 i
If you select a video DVD, the system
switches to video DVD mode
(Y page 468).
Selecting atrac kusing the number
keypad
X When the display/selection window is
active, press a number key, e.g. 002E.
The medium at the corresponding position
in the media list is loaded and then played.
Selecting atrack Selecting by skipping to
atrack
X To skip forwards or back to a track: turn
003E0012003F the COMAND controller when the
display/selectio nwindow is active.
or
X Press the 0001or0002 button.
The skip forward function skips to the next
track.
The skip back function skips to the
beginning of the current track if the track
has been playing for more than
eight seconds .Ifthe track has been playing
for less than eight seconds, it skips to the
start of the previous track. 442
AudioCOMAND