2013 MERCEDES-BENZ SL-Class ESP

X
To begin route calculation: selectStart in the menu by turning
003E0012003Fthe COMAND
controller and press 0039to confirm.
COMAND attempts to alig nthe recorded
route with the digital map. Changing route names and icons
X
Select Edit in the menu by turning
003E0012003F
the COMAND controller and press 0039to
confirm.
X To change the route name: select
Rename and press
0039to confirm.
i The name cannot be changed while the
vehicle is in motion.
X To change the icon: selectChange Icon and press
0039to confirm.
Observe the further information on managing
categories for personal POIs (Y page 337).
To change direction for route
calculation: you can set the icon for the
route to the starting point or to the
destination, thereby changing the direction
for route calculation.
During route calculation, one-way streets or
turn restrictions, for example, are taken into
account. Therefore, the outward and return
routes may differ from each other.
X Select Swap in the menu by turning
003E0012003F
the COMAND controller and press 0039to
confirm. X
To delete a route: selectDelete in the
menu by turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
Ap rompt appears asking whethe rthe route
should be deleted.
X Select Yes or
No and press
0039to confirm.
If you select Yes , the route will be deleted.
If you select No , the process will be
canceled.
Scanning the memory The SD memory card is inserted.
X
Calling up the "Routes" menu
(Y page 350).
X Select Presets in the "Routes" menu by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
The route memory is displayed.
Off-road and off-map Important safety note
G
WARNING
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver's sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their
appropriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consideration
by the COMAND system. Navigation
351COMAND Z

You can star
troute guidance to this address
directly from the address book
(Y page 401).
Deleting adestination or the home
address X
To switch to navigation mode: press the
0014 function button.
X To show the menu: press0039the COMAND
controller.
X Select Dest. in the navigation system
menu bar by turning 003E0012003Fthe COMAND
controller and pressing 0039to confirm.
X Select From Memory and press
0039to
confirm.
You will see the destination memory list
either with the character bar (option 1) or
as a selectio nlist (option 2).
X Option 1: destination memory list with
th ec haracter bar: enter characters using
the character bar (Y page 301).
X Option 2: destination memory lis tas
selection list: select a destination by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
You see the address data of the selected
entry.
X Select Delete and press
0039to confirm.
Ap rompt appears asking whethe ryou wish
to delete the destination.
X Select Yes or
No and press
0039to confirm.
If you select Yes , COMAND deletes the
destination .You will see amessage to this
effect.
If you select No , the process will be
canceled.
i If the navigable address data for the
destination being deleted is also assigned
to an address book entry, COMAND will
also delete this data from there. If the
corresponding address book entry does
not contain any further data, such as telephone numbers, COMAND deletes the
entire address book entry. Previous destinations
Introduction COMAND automatically stores the previous
destinations for which route calculation has
been started. If the memory is full, COMAND
deletes the oldest destination. You can also
save a destination from the list of previous
destinations in the destination memory. It will
be stored there permanently.
Storing
adestination permanently in
the destination memory X
Proceed as described in the "From the list
of previous destinations" section
(Y page 325).
Storing the vehicle position in the list of
previous destinations X
To switch on navigation mode: press the
0014 function button.
X To show the menu: press0039the COMAND
controller.
X Select Position in the navigation system
menu bar by turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
X Select Save Vehicle Position and press
0039 to confirm.
COMAND stores the current vehicle
position as a destination in the list of
previous destinations.
Storing the crosshair position in the list
of previous destinations Ac
rosshair appears on the map if you have
moved the map manually (Y page 362). You
can store the crosshair position as a
destination in the list of previous
destinations. Navigation
361COMAND Z

X
To show the menu: press0039the COMAND
controller.
X Select Position in the navigation system
menu bar by turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
X Select Save Crosshair Position and
press 0039to confirm.
Deleting one of the previous
destinations X
To switc hon navigation mode: press the
0014 function button.
X To show the menu: press0039the COMAND
controller.
X Select Dest. in the navigation system
menu bar by turning 003E0012003Fthe COMAND
controller and pressing 0039to confirm.
X Select From Last Destinations and
press 0039to confirm.
The list of last destinations appears.
X Select the desired destination and press
0039 to confirm.
The destination address appears.
X Select Delete and press
0039to confirm.
Ap rompt appears asking whethe rthe entry
should be deleted.
X Select Yes or
No and press
0039to confirm.
If you select Yes , the entry is deleted.
If you select No , the process will be
canceled. Map operation and map settings
General notes Company logos displayed on the map are
trademarks of the respective companies and
used solely for the purpose of indicating the
locations of these companies. The use of such
logos on the map does not indicate approval
of, support of or advertising by these
companies for the navigation system itself. Setting the map scale
0002
Set map scale as a number with unit
0003 Currently set map scale as indicated by
the needle on the scale bar
0027 New map scale
0026 Scale bar
Unit of measurement 0002in the COMAND
display depends on the selection made for the
instrumentc luster, see the separate vehicle
Operator's Manual.
X To hid ethe menu: slide00380012the COMAND
controlle rand, when the Full Screen menu ite
mis shown, press 0039.
X To call up the scale bar: as soon as you
turn 003E0012003F the COMAND controller, scale
bar 0027appears.
X Turn 003E0012003F until the desired scale is set.
Moving the map Showing the crosshair
Map with crosshair
0002
Current vehicle position
0003 Crosshair
0027 Details of the crosshair position
0026 Map scale selected 362
NavigationCOMAND

X
To hide the menu: slide00380012the COMAND
controller and, when the Full Screenmenu ite
mis shown, press 0039.
X To scroll the weather map: slide003600120037,
00380012000A or00340012003D the COMAND controller.
Ac rosshair appears on the map. If you slide
it again, the map under the crosshair moves
in the corresponding direction.
Display 0027may be the name of a street, for
example, provided the digital map contains
the necessary data .Itshows the geo-
coordinate position of the crosshair if the
Geo-coordinates display is switched on
(Y page 365).
Hiding the crosshair and centering the
map on the vehicle position or destination
X Press the 001Fback button twice.
The crosshair disappears and the map is
set to the vehicle position.
Centering the map on the vehicle's
position
X To show the menu: press0039the COMAND
controller.
X Select Position in the navigation system
menu bar by sliding 0012000Aand turning 003E0012003F
the COMAND controller and press 0039to
confirm.
X Select Vehicle Position Map and press
0039 to confirm or, if the crosshair is shown,
press the 001Fback button.
This hides the crosshair.
Centering the map on the destination
position
This function requires a calculated route to a
destination. If the route includes waypoints
and an intermediate stop, the map can also
be set to these positions.
X To show the menu: press0039the COMAND
controller.
X Select Position in the navigation system
menu bar by sliding 0012000Aand turning 003E0012003Fthe COMAND controller and press
0039to
confirm.
X Select Destination Map and press
0039to
confirm.
The crosshair position is set to the relevant
destination.
Map settings Calling up the map settings menu
X
To show the menu: press0039the COMAND
controller.
X Select Navi in the main function bar by
sliding 00380012and turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
X Select Map Settings and press
0039to
confirm.
The map settings menu appears.
Map orientation Example: map orientation
0002
Current map orientation (001B or¤) Navigation
363COMAND Z

Switching the hands-free microphone on/
off
This function is also available during an active
phone call.
X
Call up the telephone basic menu
(Y page 383).
X To switch off: selectMic Off and press
0039 to confirm.
If the microphone is switched off, the
display shows the 000Csymbol and the The microphone is off message appears for
a short period.
X To switch on: selectMic On and press
0039 to confirm.
The 000Csymbol disappears. You will briefly
see the The microphone is on message.
Sending DTMF tones This function is not supported by all mobile
phones.
Answering machines or other devices can be
controlled by DTMF tones, e.g. for remote
query functions.
X If you would like to listen to the messages
on your answering machine, for example,
dial the corresponding number.
X To transmit individual characters: once
a connection has been established to the
answering machine, select the desired characters in the character bar, pressing
0039
to confirm each of them.
or
X Press the corresponding key on the
COMAND number keypad.
Every character selected will be
transmitted immediately.
X To send a phone book entry as a DTMF
sequence: selectName by turning
003E0012003Fthe
COMAND controller and press 0039to
confirm.
X Select the desired phone book entry and
press 0039to confirm.
The entry is sent as a DTMF character
string.
X To return to the call display: select
Back and press
0039to confirm.
i You can also send DTMF tones using the
Voice Control system; see the separate
operating instructions.
Calls with several participants Rejecting or accepting
awaiting call
The mobile phone network provider must
support and activate the call-waiting function.
Depending on the mobile phone used, the
system behavior differs whe naccepting a
call.
If you have a call in progress and receive
another call, a new window appears in the
display .You also hear a tone. You can accept
or reject the call.
X To reject: selectReject and press
0039to
confirm.
or
X Press the 003Cbutton on COMAND or on
the multifunction steering wheel.
X To accept: selectAccept and press
0039to
confirm.
or
X Press the 0017button on COMAND or on
the multifunction steering wheel. 386
TelephoneCOMAND

i
If no mobile phone is connected, then the
Call Lists menu item is grayed out and
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND, the previously available call lists
and their entries will be deleted
automatically. They are still available on the
mobile phone itself.
i You will only be able to select the
respective menu items once calls have
been received or dialed from COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Opening the call list and selecting an
entry X
Press the 0012function button.
X Select Call Lists in the telephone basic
menu by sliding 0012000Aand turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
Am enu appears.
X Select Calls Received or
Calls Dialed by turning
003E0012003Fand press 0039to
confirm.
The corresponding list appears.
i You can also call up the list of dialed calls
by pressing the 0017button when the
telephone basic menu is shown. In this
case, the list will only show phone
numbers.
X Select an entry by turning 003E0012003Fthe
COMAND controller.
X To dial a phone number: press0039.
X To close the list: select the0027symbol
and press 0039to confirm.
or
X Press the 001Fback button. Displaying details from a list entry COMAND can also show a shortened list entry
in full.
X Select a list entry by turning 003E0012003Fthe
COMAND controller.
X Select the list symbol to the right of the
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Details and press
0039to confirm.
The detailed view appears.
X To go back to the list: slide003600120037
repeatedly until the list is highlighted.
Storing aphone number New address book entry
For incoming calls from a perso
nwho is not
in the address book, COMAND displays the
phone number in the call list. You can save
this entry.
X Open a call list and select an entry
(Y page 392).
X Select the list symbol to the right of the
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Save and press
0039to confirm.
X Select New Entry and press
0039to confirm.
X Select a category for the number, e.g.
Home , and press
0039to confirm.
X Select a category for the phone, e.g.
Mobile , and press
0039to confirm. Number category Display (phone
book and address
book)
Not Classified No symbol
Home 0010
Work 000E392
TelephoneCOMAND

X
Option 2: search for an address book entry
(Y page 389).
X Select the list symbol to the right of the
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Delete and press
0039to confirm.
Irrespective of the option chosen, a prompt
will appear.
X Select Yes or
No and press
0039to confirm.
If you select Yes , the entry will be deleted.
If you select No , the process will be
canceled.
Displaying the detailed view for an
address book entry Selecting an entry
Detailed display of address book
0002 To return to the previous menu
0003 \Business details
0027 List symbol (to call up options)
X Search for an address book entry
(Y page 389).
X Make a selection in the selection list by
turning 003E0012003Fthe COMAND controller.
or
X Call up the address book (Y page 398).
X Select an entry by turning 003E0012003Fthe
COMAND controller.
X Press 0039the COMAND controller.
The detailed view appears. Starting route guidance to an address
X
Select the address data field by turning
003E0012003F the COMAND controller and press
0039 to confirm.
The route to the destination address is
calculated and route guidance starts
(Y page 323).
Calling atelephone number
X Select the phone number data field by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
This initiates dialing and you can then make
your call (Y page 385).
Showing the details of an address book
entry
X Select the list symbol to the righ tofthe
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Details and press
0039to confirm.
The display is shown in full.
X To close the detailed display: press the
001F back button.
Changing an address book entry
X Option 1: search for an address book entry
(Y page 389).
X Make a selection in the selection list by
turning 003E0012003Fthe COMAND controller.
X Select the list symbol to the right of the
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
Am enu appears. 400
TelephoneCOMAND

X
Select Edit and press
0039to confirm.
X Option 2: call up the detailed view for an
address boo kentry (Y page 400).
X Select the list symbol to the right of the
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Edit and press
0039to confirm.
Irrespective of the option, the input menu
containing data fields appears.
Information about character entry
(Y page 299)
Changing the category of a telephone
number data field
X Display details for an address book entry
(Y page 400).
X Select the telephone numbe rdata field.
X Select the list symbol to the righ tofthe
entry by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Change Category and press
0039to
confirm.
X Select a number category, e.g. Home .
X Select a telephone category, e.g. MobilePhone .
X If desired, select Preferred and press
0039
to confirm.
Depending on the previous status, switch
the option on 0013or off 0003.The phone
number is displayed as the first number in
the phone book and can be dialed
immediately.
X Select Save and press
0039to confirm.
The new category is stored.
Calling anumber stored in an entry Conditions
The mobile phone must be connected via the
Bluetooth ®
interface (Y page 378). Dials
anumber
X Display details for an address book entry
(Y page 400).
X Select the phone numbe rdata field by
turning 003E0012003Fthe COMAND controller.
X Press 0039the COMAND controller to
confirm.
or
X Select the list symbol to the righ tofthe
data field by sliding 00120037the COMAND
controller.
X Press 0039the COMAND controller to
confirm.
X Select Call and press
0039to confirm.
The telephone makes the call. The display
switches to telephone mode.
Storing the phone number as a speed
dial number X
Display details for an address book entry
(Y page 400).
X Select the phone number data field by
turning 003E0012003Fthe COMAND controller.
X Select the list symbol to the right of the
data field by sliding 00120037the COMAND
controller and press 0039to confirm.
X Select Speed Dial and press
0039to
confirm.
You can now store the number in one of the
ten speed dial presets (Y page 394).
Starting route guidance to an entry Address book entry with navigable data
This function is available as soon as you have
stored a destination in the destination
memory (Y
page 359).
X Search for an address book entry with the
0006 symbol and select it from the list
(Y page 399). Telephone
401COMAND Z