2013 Acura ILX Navigation Manual

200Troubleshooting
Error MessagesNavigation System
Error Message
Solution
The display temperature is too high! For protection,
the display will shut down.
This message appears briefly when the display temperature is too high. The navigation
system turns off until the display cools down. The system turns back on automatically
when the display cools down.
Cannot write to the HDD due to the low temperature.
Please wait until the system warms up.
The navigation system has difficulty reading the HDD when the temperature is below
approximately -30°C (-22°F). The navigation system starts up automatically when the
display warms up.
Cannot access the HDD due to low atmospheric
pressure. Navigation and HDD audio functions are
disabled. The system will restart when atmospheric
pressure is OK.
The HDD is inoperable due to low atmospheric pressure. Move your vehicle to the
place where the atmospheric pressure is high.
No alternate route found.
No alternative route method was found. The original route method will be used.
Ensure that a road name is displayed at the bottom of the map. If the error persists, or
is shown for a wide area, see a dealer.

201
XX
Error Messages
XDisc Player
Troubleshooting
Disc Player
Error Message
Cause
Solution
BAD DISC
PLEASE CHECK OWNERS
MANUAL
Servo error
• Press the E (Eject) button and remove the disc, and check that the
error message is cleared.
• Check that the disc is not damaged or deformed, and insert the disc
again. 2Recommended Discs
P. 136
• If the error message reappears, press the E button, and pull out
the disc.
• Insert a different disc. If the new disc plays, there is a problem with
the first disc.
• If the error message repeats, or the disc cannot be removed, contact
a dealer. Do not try to force the disc out of the player.
BAD DISC
PLEASE CHECK OWNERS
MANUAL
PUSH EJECT
Mechanical error
Mech Error
Mechanical error
Check Disc
Focus error
Disc violates copyright
Disc not supported
CHECK DISC LOAD
Load error
Unplayable File
Track format not supported
• Current track will be skipped. The next supported track plays
automatically.
Heat Error
High temperature
• Turn the audio system off and allow the player to cool down until
the error message is cleared.

202
XX
Error Messages
XiPod®
Troubleshooting
iPod®
Error Message
Cause
Solution
UNSUPPORTED Ver.
Appears when an unsupported
iPod® is connected.
Update the iPod® software to the latest version.
CONNECT RETRY
Appears when the iPod® cannot
be authenticated.
Reconnect the iPod®.
No Song
Appears when there are no tracks
in the iPod®.
Store tracks in the iPod®.

203
XX
Error Messages
XUSB Flash Drive
Troubleshooting
USB Flash Drive
Error Message
Cause
Solution
File Error
The system cannot read the
track(s).
Check the tracks in the USB flash drive. There is a possibility that the
tracks have been damaged.
Unsupported
Appears when an unsupported
device is connected.
If it appears when a supported device is connected, reconnect the
device.
Unplayable File
Appears when the tracks in the
USB flash drive are DRM or an
unsupported format.
This error message appears for about 3 seconds, then plays the next
song.
No Song
Appears when the USB flash drive
is empty or there are no tracks in
MP3, WMA, or AAC format in the
drive.
Save tracks in MP3, WMA, or AAC format in the USB flash drive.

204

205
Reference Information
System Initialisation..............................206
Entering the Security Code ....................206
Acquiring GPS Information ....................206
Startup Confirmation Screen .................207
Map Matching ......................................207
System Limitations................................208
GPS System...........................................208
Address Calculation ..............................208
Database ..............................................208
Client Assistance....................................210
Resolving Problems ...............................210
Reporting Errors ....................................210
Acura Client Relations Contact Information .
210Visiting a Dealer ................................... 210
Map Coverage ..................................... 211
Obtaining a Navigation Update Data .... 211
Legal Information................................. 212
Copyrights ........................................... 212
User Agreements ................................. 212
As required by the FCC ........................ 215

206Reference Information
System InitialisationThe navigation system must be initialised if
power to the navigation system is
interrupted for any reason (e.g., the
battery was disconnected).Entering the Security CodeFind the navigation system’s security code
and serial number label in your Owner’s
Manual kit. Do not store the label in your
vehicle. If you lose the label, you must first
retrieve the serial number, and then obtain
the code. You can find out about your
serial number and security code from a
dealer.
1.Set the power mode to ON, and turn on
the audio system.X
If you set the power mode to
ACCESSORY, you will be requested
to enter the security code. See step 3.
2.Press and hold the VOL 9 (Volume/
Power) button for more than two
seconds.
X
The system is reactivated when the
system’s control unit recognizes that
the system is in your vehicle.
If the control unit fails to recognize,
“ENTER CODE” appears on the
navigation screen.
3.Enter the security code.
X
If you do not enter the security code
correctly after 10 tries, leave the
system for one hour before trying
again, or visit a dealer to have the
system reset.
Acquiring GPS InformationDepending on the length of time the
power was interrupted, your system may
require GPS initialisation.
If initialisation is not necessary, the system
proceeds directly to the Startup
Confirmation screen.
If the system fails to locate a sufficient
number of satellites to locate your position
within 10 minutes, the following screen is
displayed.

207
XX
System Initialisation
XStartup Confirmation Screen
Reference Information
If you are experiencing GPS reception
problems: 2GPS System
P. 208
Startup Confirmation ScreenThe Startup Confirmation screen is
displayed when initialisation has
successfully completed. It is displayed every
time you start your vehicle. Press u to
select OK to continue.
Map MatchingMap matching is the process of using the
acquired GPS information to locate your
position on the map screen. If you are on a
mapped road, the name of the road is
displayed along the bottom of the map
screen when map matching is completed.
Do not enter a destination until the road
name is displayed.
The system may initially show your location
on a different street (e.g., in urban areas
where streets are close together), may
show an incorrect elevation, or may delay
the display of the vehicle position icon at
intersections. This is normal; the system
will correct itself while you drive.