2013 Acura ILX Navigation Manual

128
XX
Playing FM/AM Radio
XRadio Data System (RDS)
Audio
Radio Data System (RDS)Provides text data information related to your selected RDS capable FM station.
Press the TITLE button to turn RDS information on or off. When set to ON, the name
of the FM station is displayed on the display. When set to OFF, the frequency of the
station is displayed.
HAUDIO button (in FM/AM mode)
X AUDIO MENU
X RDS Search
Search for FM stations with a strong signal that are broadcast the selected RDS
category information.
1.Move w or y to select a search
method (Seek up, Seek down,
Scan).
2.Rotate i to select a category.
Press u.
X
Scanning for stations in that
category begins. When an RDS
station is found, it begins to
play.
X
If there are no RDS-capable
stations in the area, “NOTHING”
briefly appears on the display.
■RDS Info Display■Searching for Programmes by RDS Category

129
XX
Playing FM/AM Radio
XRadio Data System (RDS)
Audio
HAUDIO button (in FM/AM mode)
X AUDIO MENU
X Read Radio Text
Display the radio text information of the selected RDS station.
■Radio Text Display
1Radio Text Display
The RDS indicator comes on the display when the
selected RDS station is broadcasting text data.

130Audio
Playing XM® RadioSelecting XM Mode1.Press the XM button.X
Press the XM button again, if necessary, to select the channel band (XM1,
XM2).
2.Select a channel using the Preset buttons and the bars (SKIP, TUNE, CATEGORY,
SCAN/A.SEL).
X
The band and channel are displayed.
Audio Screen ControlHAUDIO button (in XM mode)
Control the audio system through the navigation screen.
1.Move e to select the channel band
(XM1, XM2).
2.Rotate i to select a preset
channel. Press u.
X
Press and hold u until a beep
sounds to store the current
channel in a preset button.
X
Move r to select AUDIO
MENU. 2Audio Menu
P. 131
1Playing XM® Radio
d “Display audio screen”
You can control the radio using voice
commands.
2Radio Commands P. 221
A visual guide helps you operate the audio
system.
2System Controls P. 4
2Basic Operation P. 6
In the channel mode, all available channels are
selectable. In the category mode, you can select
a channel within a category (Jazz, Rock, Classical,
etc.).
There may be instances when XM® Radio does
not broadcast all the data fields (artist name,
title). This does not indicate a problem with your
audio system.
You can store 12 XM stations in the preset
buttons. XM1 and XM2 let you store six stations
each.
XM® Radio display messages will be displayed
on the audio screen.
2XM® Radio Display Messages P. 132
Channel band
Preset channels

131
XX
Playing XM® Radio
XAudio Menu
Audio
Audio MenuHAUDIO button (in XM mode)
X AUDIO MENU
Rotate i to select an item. Press u.
The following items are available:
•Sound Setup: Displays the sound preferences screen.
2Adjusting the Sound
P. 158
•Mode: Sets CH (channel mode) or CAT (category mode) scan mode.
•Channel List: Displays the list of available channels. Scroll the list to select a
channel.
•Channel Scan: Scans for channels with a strong signal in the current band and
plays a 10-second sample. Select Channel Scan again to stop scanning and play
the current selection.
•Category Scan: Scans for channels with a strong signal in the selected category in
the current band and plays a 10-second sample. Select Category Scan again to
stop scanning and play the current selection.
•Tune: Tunes to the channel you select. Rotate i to select a channel.

132
XX
Playing XM® Radio
XXM® Radio Service
Audio
XM® Radio Service1.You need your radio ID ready before registering for subscription.X
To see the ID in the display, press the n (TUNE) bar while in XM mode until
“0” appears in the centre display.
2.Have your radio ID and credit card number ready, and either call XM or visit the
XM website to subscribe.
Press the XM button and stay in this mode for about 30 minutes until the service is
activated. Make sure your vehicle is in an open area with good reception.
LOADING: XM is loading the audio or programme information.
OFF AIR: The channel is not currently broadcasting.
UPDATING: The encryption code is being updated. Channels 0 and 1 still work
normally.
NO SIGNAL: The signal is too weak in the current location.
--------: No such channel exists, the channel is not part of your subscription, or the
artist or title information is not available.
CHECK ANTENNA: There is a problem with the XM antenna. Contact a dealer.
■Subscribing to XM® Radio■Receiving XM® Radio■XM® Radio Display Messages
1Subscribing to XM® Radio
Contact Information for XM® Radio:
U.S.: XM® Radio at www.siriusxm.com, or
(800) 852-9696
Canada: XM Canada at www.xmradio.ca, or
(877) 209-00791Receiving XM® Radio
The XM satellites are in orbit over the equator;
therefore, objects south of the vehicle may cause
satellite reception interruptions. Satellite signals
are more likely to be blocked by tall buildings
and mountains the farther north you travel from
the equator.
You may experience reception problems under
the following circumstances:•In a location with an obstruction to the south
of your vehicle•In tunnels•On the lower level of a multi-tiered road•Large items are carried on the roof rack

133Audio
Playing a DiscSelecting Disc Mode1.Press the DISC button to play a CD or other disc.
2.Insert a disc into the disc slot.X
The disc automatically begins playing.
3.Select a track using the bars (SKIP, TUNE, CATEGORY, SCAN/A.SEL).
X
The track number and elapsed time are displayed on the display. Title
information for audio CDs is displayed if found in the Gracenote® Album Info
(Gracenote® Media Database) stored on the built-in hard disc drive (HDD). Text
information stored on MP3/WMA/AAC discs is also displayed.
Audio Screen ControlHAUDIO button (in DISC mode)
Control the audio system through the navigation screen.
Rotate i to select a track. Press u.
XMove e to select FOLDERS to
display the list of folders on MP3/
WMA/AAC discs having a folder
structure. 2Playing MP3/WMA/AAC Discs P. 135XMove r to select AUDIO MENU
to display the Audio Menu. 2Audio Menu
P. 134
1Playing a Disc
d “Display audio screen”
You can control the disc using voice commands.
2Disc Commands P. 222
A visual guide helps you operate the audio
system.
2System Controls P. 4
2Basic Operation P. 6
Do not use discs with adhesive labels. The label
can cause the disc to jam in the unit.
WMA and AAC tracks protected by digital
rights management (DRM) cannot be played.
The audio system displays “Unplayable File,”
then skips to the next track.
If there is a problem, you may see an error
message on the display.
2Error Messages P. 200
If you eject the disc but do not remove it from
the slot, the system reloads the disc automatically
after several seconds.
Pausing a Disc
Press the preset 1 button. To resume playing the
disc, press the button again.
Disc mode
Track list

134
XX
Playing a Disc
XAudio Menu
Audio
Audio MenuHAUDIO button (in DISC mode)
X AUDIO MENU
Rotate i to select an item. Press u.
The following items are available, depending on the type of disc:
•Record CD: Records a music CD onto the HDD for playback using HDD Audio.
2Recording a Music CD to HDD
P. 140
•Sound Setup: Displays the sound preferences screen.
2Adjusting the Sound
P. 158
•HDD Setup: Displays menu for setting HDD preferences for recording music CDs
and for updating Gracenote® information.
2Recording a Music CD to HDD
P. 140
2Music Search Setup
P. 44
2Updating Gracenote® Album Info
P. 146
•Repeat:
6: Repeats the current track.
7: Repeats all tracks in the current folder.
•Random:
F: Plays all tracks on the current disc in random order.
I: Plays all tracks in the current folder in random order.

135
XX
Playing a Disc
XPlaying MP3/WMA/AAC Discs
Audio
•Scan:
1: Scans all tracks on the disc (or in the selected folder) in the order they were
recorded (stored) and plays a 10-second sample. Select OFF to stop scanning and
play the current selection.
2: Scans the first track in each folder on the disc and plays a 10-second
sample. Select OFF to stop scanning and play the current selection.Playing MP3/WMA/AAC DiscsHAUDIO button (in DISC mode)
X FOLDERS
Change the folder on MP3/WMA/AAC discs that have tracks stored in a folder
structure.
1.Rotate i to select a folder. Press
u.
X
The system displays the track
list.
2.Rotate i to select a track. Press
u.
X
The system begins playing the
selected track.
1Playing MP3/WMA/AAC Discs
Folder List•Any tracks not in a folder are automatically
added to a “ROOT” folder, which is displayed
at the top of the Folder List.•If the root folder has additional folders in a
lower layer, they are listed on the screen.