2013 Acura ILX Navigation Manual

112
XX
Changing Your Route
XAdding Waypoints
Navigation
2.Move r to select OK.X
The system calculates a new
route.
Adding WaypointsAdd up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map
screen as small, numbered red flags.
The route follows the waypoints in
the order they are listed in the
Destination List.
1Adding Waypoints
Waypoints allow you to stop for gas or food, for
example, and then continue on to your
destination.
Press the MAP/GUIDE button to return to the
map screen without adding a waypoint at any
time.
The search corridor used for adding waypoints
can be adjusted.
2Edit Waypoint Search Area P. 54
You can delete waypoints or edit the order of
waypoints in the destination list.
2Editing the Destination List P. 116

113
XX
Changing Your Route
XAdding Waypoints
Navigation
HDEST/ROUTE button (when en route)
X Waypoint
1.Rotate i to select a search
method to add a waypoint. Press
u.
The following options are available:
•SEARCH AROUND: Searches in a spiral pattern around the location you select.
•SEARCH ALONG: Searches within a “corridor” on either side of the locations you
select.
2.Rotate i to select a waypoint
category (e.g., GAS STATION).
Press u.
■Adding Waypoints from the Route Menu
1Adding Waypoints
Search method
“Search around” method
“Search along” method
Continued

114
XX
Changing Your Route
XAdding Waypoints
Navigation
3.Rotate i to select a place. Press
u.X
The waypoint is added to the
Destination List.
4.Move r to select OK.
X
The route is automatically
recalculated and displayed on
the map screen.

115
XX
Changing Your Route
XAdding Waypoints
Navigation
1.Rotate i to select ADD TO Dest.
List. Press u.
2.Rotate i to select a location in
the Destination List. Press u.
3.Move r to select OK.X
The route is automatically
recalculated and displayed on
the map screen.
■Adding Waypoints from the Calculate Route Screen

116
XX
Changing Your Route
XEditing the Destination List
Navigation
Editing the Destination ListHDEST/ROUTE button (when en route)
X Destination Lists
Delete or edit the order of waypoints.
1.Move y to select Edit.
X
Move w to select Map to
display the destination and
waypoints on the map screen.
2.Rotate i to select an item. Press
u.
3.Move r to select OK.
X
The route is automatically
recalculated and displayed on
the map screen.
The following options are available:
•Delete: Rotate i to select a list item to delete. Press u.
•Edit Order: Rotate i to select a list item to move, press u, rotate i to select
a new location, and press u again.

117Navigation
Changing Your DestinationThere are several methods you can use to change the route destination.Find Nearest PlaceHENTER button (on map)
X Find Nearest…
Search for the nearest place/landmark on the map screen and set it as your
destination.
1.Rotate i to select Find
Nearest…. Press u.
2.Rotate i to select a category
type. Press u.
3.Rotate i to select a place. Press
u.
4.Rotate i to set the place as a
destination or add to the
destination list. Press u.
X
The system calculates the route. 2Calculating the Route
P. 87
1Find Nearest Place
d “Find Nearest…” (on map screen)
The Find Nearest voice command is the fastest
method of specifying a place/landmark as your
destination. Many kinds of places can be found.
2Find Place Commands P. 219

118
XX
Changing Your Destination
XSelecting a Destination on the Map
Navigation
Selecting a Destination on the MapSelect a new destination when en route by selecting a location on the map.
1.Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary. Press u.
X
If the address displayed is not
the desired location, press the
CANCEL button and repeat the
procedure.
2.Rotate i to select OK or Set as
Dest. (depending on the screen
displayed). Press u.
2Calculating the Route
P. 87
1Selecting a Destination on the Map
If there is more than one icon or street under the
map cursor, you are prompted to select the item
from a list.•Rotate i to select an item. Press u.•If you select Map Icon, rotate i to select a
place and press u.

119
XX
Changing Your Destination
XEntering a New Destination
Navigation
3.Rotate i to select an option.
Press u.X
The route is automatically
recalculated and displayed on
the map screen.
The following options are available:
•New Dest.: Sets the location as your new destination.
•Waypoint: Sets the location as a new waypoint.
Entering a New DestinationHDEST/ROUTE button (when en route)
X Dest. MENU 1 or Dest. MENU 2
Enter a new destination using the Destination Menu screen even when you are en
route.
1.Rotate i to select a method to
enter a new destination.
2Entering a Destination
P. 64
X
After entering a new
destination, the address is
displayed on the Calculate
Route screen.
2.Rotate i to select OK. Press u.
1Entering a New Destination
d “Display Destination”, d “Display
Navigation”
Continued