2012 TOYOTA AYGO Owners Manual (in English)

209 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
USB memory functions
Depending on the USB memory that is connected to the system, the
device itself may not be operable and certain functions may not be avail-
able. If the device is inoperable or a function is unavailable due to a mal-
function (as opposed to a system specification), disconnecting the device
and reconnecting it once again may resolve the problem.
If the USB memory still does not begin operation after being discon-
nected and reconnected, format the memory.
The system creates playlists (temporary memory), the creation time for
which this can take, can be from a few seconds to several minutes. The
playlists are updated every time the ignition is switched off or a USB
memory stick is connected. Play starts automatically after a period, which
depends on the capacity of the USB memory stick.
At a first connection, the order suggested is by folder. When connecting
again, the order previously chosen is retained.

USB memory
Compatible devices
The audio system will only play files with “.mp3”, “.wma”, “.wav” and “.ogg”
extension.
A high compression rate can adversely affect sound quality.
Playlists
The types of playlists that are accepted: “.m3u” and “.wpl”.
The number of files recognized is limited to 5000 in 500 folders on a maxi-
mum of 8 levels.
About iPod
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other coun-
tries.

210 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
iPod functions
When an iPod is connected and the audio source is changed to iPod
mode, the iPod will resume play from the same point in which it was last
used.
Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it once again may resolve the problem.
While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle’s audio system
instead.
The playlists are those defined in the iPod.

iPod problems
To resolve most problems encountered when using your iPod, discon-
nect your iPod from the vehicle iPod connection and reset it. For instruc-
tions on how to reset your iPod, refer to your iPod Owner’s Manual.
The iPod must be updated regularly for the best connection.
Compatible models
The iPod must be generation 3 or later.
CAUTION
Caution while driving
Do not connect USB memory/iPod or operate the controls.

211 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
NOTICE
To prevent damage
Do not leave USB memory/iPod in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to the player.
Do not push down on or apply unnecessary pressure to the USB memory/
iPod while it is connected as this may damage the USB memory/iPod or its
terminal.
Do not insert foreign objects into the port as this may damage the USB
memory/iPod or its terminal.
Do not connect a hard disk or USB device other than audio players to the
USB port. This may cause damage to your installation.

212
3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Using the AUX por t
: If equipped
Operating portable audio devices connected to the audio system
The volume can be adjusted using the vehicle’s audio controls. All other
adjustments must be made on the portable audio device itself.
This port can be used to connect a portable audio device and lis-
ten to it through the vehicle’s speakers.
Open the cover and connect a
portable audio device.
Press the “SRC/ ” button repeatedly until AUX mode is
displayed.

213
3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
Using the Bluetooth® audio streaming
: If equipped
Bluetooth® audio streaming functions
The Bluetooth
® audio streaming function is depending on the compatibil-
ity of the telephone.
In certain cases, playing of the audio files must be initiated from the tele-
phone.
The audio quality depends on the quality of the transmission from the
telephone.
CAUTION
Caution while driving
Do not connect Bluetooth
® audio streaming or operate the controls.
NOTICE
To prevent damage
Do not leave the telephone in the vehicle. The temperature inside the vehi-
cle may become high, resulting in damage to the telephone.
Bluetooth® audio streaming allows music files on a telephone to be
heard via the vehicle’s speakers.
Press the “SRC/ ” button repeatedly until Bluetooth
® audio mode
is displayed.
The telephone must support the appropriate Bluetooth
® profiles
(A2DP/AVRCP).
Pairing a telephone/ first connection
P. 215

214
3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Using the telephone
: If equipped
Bluetooth® audio streaming
P. 213
Bluetooth
® hands-free phone system
The hands-free system is a function that allows you to use your
telephone without touching it.
This system supports Bluetooth
®. Bluetooth® is a wireless data
system that allows the telephone to wirelessly connect to the
hands-free system and make/receive calls.
Vo lu m eDisplaying the main menu
Power on/off
Accept an incoming call
Halt current operation

215 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
Pairing a telephone/first connection
Activate the telephone’s Bluetooth
® function and ensure that it
is set as visible to all (refer to the telephone instructions).
Press the “MENU” button.
Press (Bluetooth).
Press (Search).
A window is displayed with “Searching device”.
Select the telephone to be paired from the list and press
(OK).
Only one telephone can be paired at a time.
In some cases, the Bluetooth
® address of the telephone may
appear instead of the name of the telephone.
A virtual keypad is displayed on the screen: choose a 4 digit
code then press (OK).
A message is displayed on the screen of the telephone: enter
the same code and confirm.
If pairing fails, try again; the number of attempts is unlimited.
Accept the connection to the telephone.
A message appears in the screen to confirm the result of the
connection.
Pairing can also be initiated from the telephone by searching for
detected Bluetooth® devices.
The directory and the call list can be accessed after the synchroni-
zation period (if the telephone is compatible).
Automatic connection must be configured in the telephone to allow
a connection each time the vehicle is started.

216 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Managing connections
Press the “MENU” button.
Press (Bluetooth).
Press (BT management) and confirm. The list of paired
telephones is displayed.
: Indicates connection of the audio profile.
: Indicates connection of the hands-free profile.
Press ( or ) to select a telephone and press
(OK).
Select one of to select.
“Tel.”: Hands-free connection
“Audio”: Play audio files
“Delete”: Delete the pairing.
Making a call – recently called numbers*
Press and hold the “SRC/ ” button to display the call list.
For access to the calls list, it is also possible in the following way:
“MENU”“Telephone”“Call”“Calls list”
Press ( or ) to select “Missed calls”, “Dialed calls” or
“Answered calls”.
Press ( or ) to select the desired number.
Press “ ” or “ ” on the “SEEK” button to select the next or pre-
vious page in the call list.
Press (OK) to start the call.
The call list includes the calls sent from and received by the vehicle
via the connected telephone. It is possible to make a call directly
from the telephone; however stop the vehicle in a safe area as a
safety measure.
*: Depending on the compatibility of the telephone