2012 TOYOTA AYGO reset

143
2
When driving
AYGO_WE_99E96E
2-2. Instrument cluster
Gauges and meters
Tachometer (if equipped)
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Odometer and trip meter
Odometer: Displays the total distance the vehicle has been driven.
Trip meter: Displays the distance the vehicle has been driven since the
meter was last reset.
Odometer/trip meter display change button
P. 144

144 2-2. Instrument cluster
AYGO_WE_99E96E
Changing the display
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the
trip meter.
The meters and display operate when
The engine switch is in the “ON” position.
NOTICE
To prevent damage to the engine and its components
Vehicles with a tachometer: Do not let the indicator needle of the tachome-
ter enter the red zone, which indicates the maximum engine speed.
The engine may be overheating if the high engine coolant temperature
warning light flashes or turns on. In this case, immediately stop the vehicle
in a safe place, and check the engine after it has cooled completely.
(
P. 336)

181
3-2. Using the audio system (Type A)
3
Interior features
AYGO_WE_99E96E
Using the radio
Setting station presets
Manually operation
Search for desired stations by pressing “
”or “” on .
Press and hold the button (from “1” to “6”) the station is to be
set to until you hear a beep.
Automatically operation
Press and hold the “AST” button until you hear a beep.
Up to 6 stations are set in order of reception quality. When the setting is
complete, 2 beeps will be heard.
In the FM1 or FM2 mode, the stations automatically set by the audio sys-
tem will be set in the FM3 presets.
: If equipped
Vo l u m e
Scanning for
receivable stationsStation selectorSeeking
the frequency AM/FM mode button
Power on/offTA m o d e
button
Changing
the program types
AF mode
buttonAutomatic presetting
of radio stations

182 3-2. Using the audio system (Type A)
AYGO_WE_99E96E
Scanning radio stations
Scanning the preset radio stations
Press and hold the “SCAN” button until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press the button again.
Scanning all the radio stations within range
Press the “SCAN” button.
All the stations with reception will be played for 5 seconds each.
When the desired station is reached, press the button again.
RDS (Radio Data System)
This feature allows your radio to receive station and program informa-
tion (classical, news, etc.) from radio stations which broadcast this
information.
Listening to stations of the same network
Press the “AF” button.
AF-ON, REG-OFF modes: A station among those of the same
network with strong reception is
selected.
AF-ON, REG-ON modes: A station among those of the same
network with strong reception and
broadcasting the same program is
selected.
Each time the “AF” button is pressed, the mode changes in the following
order: AF-ON, REG-OFF  AF-ON, REG-ON  AF-OFF, REG-OFF.

184 3-2. Using the audio system (Type A)
AYGO_WE_99E96E
EON (Enhanced Other Network) system (for traffic announcement
function)
If the RDS station (with EON data) you are listening to is not broadcasting a
traffic information program and the audio system is in the TA (traffic
announcement) mode, the radio will be switched automatically to a station
broadcasting a traffic information program in the EON AF list when traffic
information begins.
When the battery is disconnected
Stations presets are erased.
Reception sensitivity
Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
When the “AST” button is used, automatic station selection and auto-
matic registering of the stations may not be possible.
The radio antenna is mounted on the roof. The antenna can be removed
from the base by turning it.
Digital Audio Broadcast (DAB) radio
The optional radio antenna and tuner are necessary for the use of Digital
Audio Broadcast (DAB) radio.
NOTICE
To prevent damage, remove the antenna in the following cases
The antenna will touch the ceiling of a garage.
A cover will be put on the roof.

196
3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Using the radio
Presetting a station
Tune in the desired station.
Press and hold one of to preset to the current station.
The name of the station is displayed accompanied by an audible
signal to confirm the preset.
Press the button to listen to the corresponding preset station.
: If equipped
Press the “SRC/ ” button repeatedly until AM or FM mode is dis-
played.
Volume Preset station selectorSeeking the frequency Displaying the main menu
Power on/offDisplaying the station list
Halt current operation
Selecting the source

210 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
iPod functions
When an iPod is connected and the audio source is changed to iPod
mode, the iPod will resume play from the same point in which it was last
used.
Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it once again may resolve the problem.
While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle’s audio system
instead.
The playlists are those defined in the iPod.

iPod problems
To resolve most problems encountered when using your iPod, discon-
nect your iPod from the vehicle iPod connection and reset it. For instruc-
tions on how to reset your iPod, refer to your iPod Owner’s Manual.
The iPod must be updated regularly for the best connection.
Compatible models
The iPod must be generation 3 or later.
CAUTION
Caution while driving
Do not connect USB memory/iPod or operate the controls.

236 3-6. Other interior features
AYGO_WE_99E96E
The clock is displayed when
The engine switch is in the “ACC” or “ON” position.
Type A only: Also, press (Power) to turn the audio system on and off.
The audio power can be turned on only once even when the key is not in the
engine switch. The power, however, will automatically turn off when 30 min-
utes have elapsed.
When disconnecting and reconnecting battery terminals
The clock data will be reset.