2012 FIAT 500 ABARTH reset

Or, by using voice interaction:
Press the
steering wheel button and say“Media
Player”,then after the beep, say“Advanced USB op-
tions”and finally, after the beep, say“Albums”.
Use the Scan Up/Scan Down buttons to scroll through
the albums. To play music from a desired album, select
the album and press thePRESET UP/OKbutton.
Use the Scan Up/Scan Down buttons to scroll through
the album tracks. To play all the tracks in the all the
albums, selectPLAY ALLand press thePRESET UP/OK
button.
To play just one track, select the track title and press the
PRESET UP/OKbutton.
NOTE:If your USB device/iPod contains many audio
files, theALBUMSmenu will be subdivided into alpha-
betical submenus. The alphabetical submenu will displayjust the first letter of the albums it contains (e.g., A-F), or
it will display the first two letters (e.g., Aa- Ar).
Selection by playlist
Playlists stored in your USB device/iPod can be dis-
played with thePLAYLISTSmenu.
To select a playlist using manual interaction, proceed as
follows:
Press the
/MAINbutton to launch the Main Menu
and selectMEDIA PLAYER,then selectUSB OPTIONS
and press thePRESET UP/OKbutton on the rear of the
steering wheel.
SelectPLAYLISTSand press thePRESET UP/OKbutton.
Use the Scan Up/Scan Down buttons to scroll the play-
lists. To play a displayed playlist, select the playlist and
press thePRESET UP/OKbutton.
1
BLUE&ME™ User’s Manual 51

Or, by using voice interaction:
Press the
steering wheel button and say“Media
Player”,then after the beep, say“Advanced USB op-
tions”and finally, after the beep, say“Playlists”.
NOTE:For further details on how to build playlists,
refer to PRACTICAL HINTS.
Playing Audio Tracks
NOTE:For managing audio files on iPod or iPhone
devices, refer to TECHNOLOGIES SUPPORTED BY
BLUE&ME™Hands-Free Communication, MANAG-
ING AUDIO FILES FROM IPOD DEVICES.
Shuffle playback of the whole media library
The optionPLAY ANYTHINGcan be used to quickly
play the whole content of your media library at random.To startPLAY ANYTHINGusing manual interaction,
proceed as follows:
Press the
/MAINbutton to launch the Main Menu
and selectMEDIA PLAYER,then selectUSB OPTIONS
and press thePRESET UP/OKbutton on the rear of the
steering wheel.
SelectPLAY ANYTHINGand press thePRESET UP/OK
button.
Or, using voice interaction:
Press the
steering wheel button and say“Media
Player”,then after the beep, say“Advanced USB op-
tions”and finally, after the beep, say“Play Anything”.
For further details on digital audio files playback, refer to
DIGITAL AUDIO SELECTION.
52 BLUE&ME™ User’s Manual

Audio play
To start playing an audio file using manual interaction,
proceed as follows:
If theAUTOPLAYoption is on, connect your USB
device/iPod toBLUE&ME™;track playback will start
automatically.
You can also select the required audio file and then press
thePRESET UP/OKbutton on the rear of the steering
wheel.
Or, using voice interaction:
Press the
steering wheel button and say“Play
anything”.
Pause
To pause the track being played: Press the/ESCor the
MUTEbutton on the radio.
Play
To resume playback of the paused track: Press the
/ESCbutton, or theMUTEbutton on the radio.
Stop
To stop playing a track: press thesteering wheel
button and say“Stop”. To resume playback : press the
steering wheel button and say“Play”.
Next track
To play the next track using manual interaction, proceed
as follows:
While playing a digital track press the Scan Up
rear
steering wheel button.
Or, using voice interaction:
While playing a digital track, press the
steering
wheel button and say“Next”.
1
BLUE&ME™ User’s Manual 53

Previous Track
To play the previous track using manual interaction,
proceed as follows:
While playing a digital track press the Scan Down
rear steering wheel button.
Or, using voice interaction:
While playing a digital track, press the
steering
wheel button and say“Previous”.
NOTE:If the“Previous”track (manual or voice) com-
mand is given after playing the first 3 seconds of the
track, the track will be started over. If it is given within
the first 3 seconds, the previous track will be played.
Changing audio sources
To change the current sound source (Radio, CD, CD
Changer, Media player), press thePRESET UP/OKbut-
ton on the rear of the steering wheel orFM, AM or
MEDIAbuttons on the radio.NOTE:For further details on voice commands (key-
words) to be used with the media player, refer to VOICE
COMMANDS (KEYWORDS) - SUMMARY.
iPodcompatibility
What I can do
•Listen to tracks in digital quality
•Select tracks by category (Artist, Album, Genre, etc.)
by voice control or using the controls on the steering
wheel
•Recharge the iPodvia USB
NOTE:
•The device must be in playback mode or paused to
start playing a track on some iPod/iPhone models.
•Load the tracks onto the iPod/iPhone device using
the procedure specified in the device manual.
•It is advisable to keep telephones and iPods updated
for optimal operation with theBLUE&ME™system.
54 BLUE&ME™ User’s Manual

To create a pairing relationship using manual interaction,
proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
SelectPAIRINGand then press thePRESET UP/OK
button. The system will start the pairing procedure.
BLUE&ME™will show the mobile phone pairing PIN
on the instrument panel display and announces it. Please
note that this is a PIN used just for this operation; it is not
your SIM PIN.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select
BLUE&ME™(item that identifiesBLUE&ME™on your
car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display. If pair-
ing is successful, the system will say“Connecting”and
then the display will show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAIN
button or the
/ESCbutton will cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
After pairing, the system will say“Welcome”immedi-
ately after connecting. This message will no longer be
heard the next time the phone connects to the system.
The system will ask if you would like to copy your paired
phone’s phonebook. It is recommended to copy it. To
58 BLUE&ME™ User’s Manual

start copying the phonebook, press thePRESET UP/OK
button; otherwise press the
/ESCbutton. You can
download your phonebook at a later time using the
menu optionSETTINGS, USER DATA, or PHONE-
BOOK.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone then say“Pairing”.
The system shows the mobile phone pairing PIN on the
instrument panel display and repeats it.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select “
BLUE&ME™” (item that identifies the hands-free com-
munication package in your car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAINor
/ESCbuttons at this time may cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
The first time a phone connect to the system, the system
will say“Welcome”immediately after connecting. This
message will no longer be heard the next time the phone
connects to the system.
1
BLUE&ME™ User’s Manual 59

•If you download a phonebook with a contacts list
including more than 1000 contacts, the system may
operate slower than expected and voice recognition of
the names in your phonebook may be degraded.
•If the pairing list is accidentally deleted, the pairing
procedure will be repeated.
Managing User Data
You can manage the user data used byBLUE&ME™by
entering theUSER DATAmenu. The phonebook can be
deleted, all paired phones and their associated phone-
book data can be deleted, or all data can be deleted. If all
data is deleted then the memory inBLUE&ME™will be
restored to it’s initial empty condition. If the phonebook
had not been previously downloads during the phone’s
initial pairing then you can choose to download it now or
you can copy individual contacts from you phone toBLUE&ME™. Not all phones support phonebook down-
loading or copying individual contacts. Consult www-
.fiatusa.com for further information on the list of com-
patible mobile phones.
To open theUSER DATAmenu using manual interac-
tion, proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
Select theUSER DATAand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”.Wait until
after the tone then say“User data”.
In theUSER DATAmenu you can perform the following
functions described below.
62 BLUE&ME™ User’s Manual

Delete user data
In theUSER DATAmenu you can delete the pairing list.
After you delete the pairing list, you cannot use an
unpaired phone with the hands-free communication sys-
tem, or its phonebook, until you re-pair it. Always
remember that this operation deletes all the devices from
the pairing list.
To delete user data using manual interaction, proceed as
follows:
SelectDELETE USERSand then press thePRESET
UP/OKbutton.
The system will display the messageDELETE USERS?.
To confirm, press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
, say“Settings”,wait for the tone then say
“Delete users”.The system will ask“Delete all paired users?”.To
confirm, say“Yes”.
NOTE:
•Always remember that if a mobile phone is paired
with the system while another phone is connected, the
connection with the current phone is ended to estab-
lish a connection with the new phone.
•It is not possible to delete the pairing relationship with
a single phone on the pairing list unless it is the only
phone present on the pairing list.
•If all paired users are deleted from the pairing list then
each phone must be re-paired before it can be used
withBLUE&ME™again.
Delete the phonebook
In theUSER DATAmenu you can delete the phonebook
data that was downloaded to the system.
1
BLUE&ME™ User’s Manual 63