2012 FIAT 500 ABARTH pairing phone

▫Playing Audio Tracks.................. 52
▫Practical Hints For Using The Media Player . . 55
Setting Functions....................... 56
▫Pairing a Mobile Phone................. 57
▫Managing User Data................... 62
▫Advanced Options.................... 65
▫Media Player Settings.................. 66
BLUE&ME™ Hands-Free Communication
Supported Mobile Phones................. 68
▫Mobile Phones With BluetoothWireless
Technology.......................... 69
▫Supported USB Memory Devices.......... 70
List Of Available Voice Commands.......... 74
Troubleshooting....................... 83▫Hands-Free Communication Package....... 83
▫Message Reader...................... 91
▫Media Player........................ 94
▫iPod............................. 99
Personal Data Protection................ 101
System Software Use Notice.............. 101
▫End User License Agreement (“EULA”).... 102
▫Grant Of Software License. This EULA
Grants You The Following License........ 102
▫Description Of Other Rights And
Limitations......................... 103
▫Upgrades And Recovery Media.......... 106
▫Intellectual Property Rights............. 106
▫Export Restrictions................... 106
1
BLUE&ME™ User’s Manual 3

and securely using either voice commands or buttons on
the steering wheel, under any driving condition, without
having to take your eyes off the road or removing your
hands from the steering wheel, as required by current
legal regulations.
Bluetoothwireless technology enables wireless connec-
tion between your mobile phone and the hands-free
package installed on your car.
To use the hands-free package, you need aBluetooth
wireless technology enabled mobile phone. This hands-
free package gives you the possibility of interacting
vocally with your mobile phone while driving, even if
your mobile device does not feature this capability. You
can also interact with your mobile phone manually and
visually using the steering wheel controls and the instru-
ment panel multifunction display.For further details on the mobile phones supported by
BLUE&ME™,refer toBLUE&ME™SUPPORTED MO-
BILE PHONES.
To get started withBLUE&ME™Hands-Free Communi-
cation with voice recognition, you have to simply pair
yourBluetoothwireless technology enabled mobile
phone with the system.
Pairing is an operation that has to be performed only
once.
NOTE:
•During the mobile phone pairing procedure,
BLUE&ME™attempts to detect a phone equipped
withBluetoothwireless technology within range and
then establishes the connection using a Personal Iden-
tification Number (PIN).
6 BLUE&ME™ User’s Manual

•To answer a call –you can answer an incoming call by
pressing theMAIN/Phonebutton on the steering
wheel.
•Conference call –you can call another contact while
you are engaged in a phone conversation (Conference
Calling is only supported by a compatible mobile
phone).
•Call waiting –while engaged in a phone conversation,
you can receive notification of another incoming
phone call, answer the other incoming phone call, and
switch between two ongoing phone conversations.
(Call waiting is only supported by a compatible mo-
bile phone.)
•Refusing an incoming call or ending a call –you can
refuse an incoming call or end a current call by
pressing thePhone Hang-upbutton on the steering
wheel.With your mobile phone in the vehicle and the pairing
procedure complete, connect to your mobile phone to
BLUE&ME™and you can make phone calls by speaking
keywords or pressing buttons on the steering wheel.
When using the hands-free phone, the audio output of a
phone conversation is heard through your car’s speakers.
Message Reader
TheBLUE&ME™message reader enables automatic
reading, through the car sound system, of the SMS texts
you receive on yourBluetoothwireless technology
enabled mobile phone that are received when the phone
is paired and connected toBLUE&ME™system. The
message reader does not provide access to messages that
were received before you entered the car and connected
with theBLUE&ME™system. Only a subset of abbre-
viations and emoticons are supported by the
BLUE&ME™system.
8 BLUE&ME™ User’s Manual

Button Short press function (less than 1 second) Long press function
(more than 1 second)
VOICE RECOG-
NITION (VR)•Activate voice recognition
•Interrupt voice announcement to provide a new voice com-
mand•Repeat the last utter-
ance in a voice inter-
action
PHONE HANG UP
•Reject an incoming call and end a phone call in progress
•End an active call and switch to a call waiting (on hold)–
PRESET UP/OK (left
side back of steering
wheel)•Confirm manually selected menu option
•Switch phone conversation from the hands-free phone to
your mobile phone and vice versa
•Select displayed message–
SCAN UP
/SCAN
DOWN
(left side
back of steering wheel•ScrollBLUE&ME™menu items
•Scroll though media player tracks
•Scroll inbox messages–
NOTE:
•For both operating modes of Voice Command steering
wheel buttons (short or long press), the function
chosen will be activated when you release the button.
•When connecting toBLUE&ME™Hands-Free Com-
munication for the first time, your phone’s phonebook
will automatically be downloaded. If this operation is
not allowed immediately after pairing for the first
time, theBLUE&ME™system will prompt you for the
1
BLUE&ME™ User’s Manual 17

phonebook each time you connect to the system. For
phones containing a SIM card, the phonebook on the
SIM card will be downloaded if it is allowed. See your
phone’s Operating Manual for further details.
BLUE&ME™ HANDS-FREE COMMUNICATION
PACKAGE QUICK REFERENCE GUIDE
To quickly get started with using theBLUE&ME™
Hands-Free Communication Package with voice recogni-
tion andBluetoothwireless technology:
•Prepare your mobile phone phonebook
•Turn the ignition key to ON
•Try out the voice commands
•Pair your mobile phone
•Make a phone call
Instructions for each of the above functions are given in
the following paragraphs.
Prepare Your Mobile Phone Phonebook
Before creating a pairing relationship between your mo-
bile phone andBLUE&ME™Hands-Free Communica-
tion, you should make sure that you have contact entries
in your mobile phone phonebook so that you can use
them with the hands-free phone.
If your phonebook is empty, quickly create several new
entries for frequently dialed phone numbers. For further
details, consult your mobile phone owner ’s manual.
To properly enter contacts in your mobile phone phone-
book, refer to SETTING FUNCTIONS - PAIRING YOUR
MOBILE PHONE.
Important Notes
•
The phonebook copied toBLUE&ME™can only be
used when the corresponding mobile phone is paired
and connected.
18 BLUE&ME™ User’s Manual

Pair Your Mobile Phone
CAUTION!
BLUE&ME™ Hands-Free Communication only al-
lows this operation to be performed when the car is
stopped.
To pair your mobile phone, proceed as follows:
•Press thesteering wheel button and say“Set-
tings”then, at the end of theBLUE&ME™message
say“Pairing”.
•The system will show the phone pairing PIN number
on the multifunction display. For the next two steps,
consult your mobile phone owner ’s manual about
Bluetoothpairing procedures for your phone.
•On your mobile phone, search for devices equipped
withBluetoothwireless technology (the setting on
your mobile phone might be called Discover or New
Device). In this list you will findBLUE&ME™(name
identifying theBLUE&ME™system on your car);
select it.
•When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and at the end the
display will show a confirmation message, the ID of
the paired mobile phone.
It is essential to wait until you see this confirmation
message on the display. Pressing the
/MAINbutton
on the steering wheel or
/ESCbefore the message is
displayed may cancel the pairing process. If the pairing
process fails, an error message will be displayed: in this
event repeat the pairing procedure.
20 BLUE&ME™ User’s Manual

•After the first pairing,BLUE&ME™will say“Wel-
come”immediately after connecting. This message
will no longer be heard when your phone automati-
cally connects to theBLUE&ME™system on future
ignition cycles.
•BLUE&ME™will ask if you would like to copy your
paired phone phonebook toBLUE&ME™. It is recom-
mended to copy it. To start copying the phonebook say
“Yes”,otherwise say“No”.
Making a Phone Call
Assume that “John Smith” is one of the contacts stored in
your phonebook.
To call John Smith, proceed as follows:
•Press thebutton and say“Call John Smith”.
•If the name is recognized, the system will display the
recognized contact’s information on the display
screen.If there is just one phone number for John Smith in your
phonebook, the system will ask if you would like to call
John Smith. To start the call say“Yes”,otherwise say
“No”.
If John Smith has several phone numbers, the system will
ask which phone number you would like to call (e.g.,
“Call John Smith (at) Work or (at) Home?”). Answer
with the type of required phone number (e.g.,“(at)
Home”).
If John Smith has several phone numbers but the “loca-
tion” (e.g., the type of phone number like work, home,
etc.) is missing, the system will display the selected
contact and a list of related phone numbers on the
instrument cluster display. The hands-free communica-
tion system will ask if you would like to call the phone
number displayed. To respond with “yes”, say“Yes”,
otherwise say“No”. You can also scroll through the
phone number list manually by pressing the buttons on
1
BLUE&ME™ User’s Manual 21

The Main Menu includes the following options:
•RECENT CALLS- this submenu allows you to view a
list of the recent calls made or received. This list is
either downloaded from your mobile phone memory,
or accumulated via use of the hands-free phone, or
both.
•PHONEBOOK- this submenu allows you to view the
phone numbers in your phonebook and to select one
to dial. If there are a large number of entries in your
phonebook, then the items will be contained in groups
within alphabetical submenus indicating the contacts
within that group. The number of contacts within a
group depends on the amount of entries in your
phonebook.
•MESSAGE READER- This submenu enables the
ability to read the last message received, calling the
message sender or deleting the last message received.
It is possible to store up to 20 received messages in thededicated inbox and to play them later, to call the
message sender or to delete the messages. It is possible
to select notification signals for the arrival of a new
SMS text. Messages must be received while the mobile
phone is connected to theBLUE&ME™system. Mes-
sages that are already present on the mobile phone
before entering the car and turning the ignition ON are
not accessible
•MEDIA PLAYER- this submenu allows the ability to
scroll the digital audio tracks in the library by folder,
artist, genre, album or by playlist. This submenu is
used to select and play tracks. ForiPodplayers- refer
to MEDIA PLAYER FUNCTIONS.
•SETTINGS- this submenu allows you to perform
tasks such as managing your phonebook entries, cre-
ate a pairing relationship, or select the SMS notifica-
tion settings.
30 BLUE&ME™ User’s Manual