2012 FIAT 500 ABARTH pairing phone

Delete user data
In theUSER DATAmenu you can delete the pairing list.
After you delete the pairing list, you cannot use an
unpaired phone with the hands-free communication sys-
tem, or its phonebook, until you re-pair it. Always
remember that this operation deletes all the devices from
the pairing list.
To delete user data using manual interaction, proceed as
follows:
SelectDELETE USERSand then press thePRESET
UP/OKbutton.
The system will display the messageDELETE USERS?.
To confirm, press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
, say“Settings”,wait for the tone then say
“Delete users”.The system will ask“Delete all paired users?”.To
confirm, say“Yes”.
NOTE:
•Always remember that if a mobile phone is paired
with the system while another phone is connected, the
connection with the current phone is ended to estab-
lish a connection with the new phone.
•It is not possible to delete the pairing relationship with
a single phone on the pairing list unless it is the only
phone present on the pairing list.
•If all paired users are deleted from the pairing list then
each phone must be re-paired before it can be used
withBLUE&ME™again.
Delete the phonebook
In theUSER DATAmenu you can delete the phonebook
data that was downloaded to the system.
1
BLUE&ME™ User’s Manual 63

To delete the phonebook using manual interaction, pro-
ceed as follows:
SelectDEL. PHONEBOOKand then press thePRESET
UP/OKbutton.
The system will display the questionDEL. PHONE-
BOOK?. To confirm, press thePRESET UP/OKbutton
Or, using voice interaction:
Press the
button and say“Settings”wait for the
tone and then say“Delete phonebook”.
The system will ask“Delete copy of phonebook from
the system?”To confirm, say“Yes”.
Download the phonebook
If you chose not to download the phonebook during the
phone pairing procedure, or if you recently deleted the
current phonebook, theUSER DATAoption will be
available in thePHONEBOOKmenu.To download a paired mobile phone phonebook using
manual interaction, proceed as follows:
SelectPHONEBOOKand then press thePRESET
UP/OKbutton.
Or, using voice interaction
Press the
button and say“Settings”,wait for the
tone and then say“Download phonebook”.
Add contacts
To copy contacts from your mobile phone to the hands-
free communication system using manual interaction,
proceed as follows:
SelectADD CONTACTSand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone and say“Add Contacts”.
64 BLUE&ME™ User’s Manual

Mobile Phones With BluetoothWireless
Technology
BLUE&ME™Hands-Free Communication supports
most mobile phones withBluetooth1.1 and Hands-Free
1.5 profile support (refer to theBluetoothwireless
connection specifications given in your mobile phone
owner ’s manual).
Due to the different software versions supported on
mobile phones, certain functions (e.g., answering a sec-
ond incoming phone call, transferring phone a phone call
from hands-free communication system to mobile phone
and vice versa, etc.) may not be supported as described in
this manual. In any case, phone conversation using the
hands-free communication package will not be impaired.
“Pull” phones
“Pull” phone means that your mobile phone supports
automatic phonebook download withBluetoothwire-
less technology, your whole phonebook will be automati-
cally downloaded toBLUE&ME™during the initial
phone pairing procedure and updated every time your
phone connects toBLUE&ME™.
To consult the list of mobile phones and functions
supported, consult the dedicated website at www.fia-
tusa.com or Customer Services on 888-CIAO-FIAT
(888-242-6342).
“Push” phones (phonebook not automatically
downloaded)
“Push” phone means that your mobile phone supports
single contact download withBluetoothwireless tech-
nology. After the pairing process you will need to go to
the USER DATA, ADD CONTACTS menu to send phone-
book contacts from your mobile phone toBLUE&ME™.
1
BLUE&ME™ User’s Manual 69

Problem Probable Cause Possible Solution
Display screen shows:
PAIR. FAILED and the
system says “Pairing un-
successful. Please try
again.”•A technical error occurred during the
pairing procedure•Verify the correct PIN number, and try
entering it again
•Reset the mobile phone by turning it
off and on, and then retry the pairing
procedure – see the section SETTING
FUNCTIONS - PAIRING YOUR MO-
BILE PHONE
Display screen shows:
PRIVATE NUMBER•The caller is not recognized as a name
stored in the phonebook, or the paired
mobile phone does not have a called ID
feature
•The caller has blocked caller ID to pre-
vent the system from displaying the
caller ’s name and/or phone number•Enter a contact in your mobile phone-
book for the incoming call, and then
download your phonebook or contact
again
•For phones with no caller ID support
or for calls from callers with caller ID
blocked, nothing can be done and the
message will always appear
86 BLUE&ME™ User’s Manual

Problem Probable Cause Possible Solution
•If you don’t press the
button be-
fore pronouncing a voice command, the
system will not activate voice recogni-
tion and therefore will not recognize
your voice commands
•If you don’t press the
/MAINbut-
ton to enter the Main Menu, it will not
be possible to manually access the
BLUE&ME™menu
•If after pressing the
/MAINbutton,
you don’t take action within approxi-
mately eight seconds, the system will
not respond to your key press
The mobile phone
prompts you to enter a
PIN number, but no
phone pairing proce-
dure was running•After you delete the pairing-related user
information on your mobile phone or
on the system, theBluetoothpairing
relationship between your mobile phone
andBLUE&ME™will no longer work•
Select option DELETE USERS on the system
and delete all users; then, pair the phone
again – see the section SETTING FUNCTIONS
- MANAGING USER DATA AND PHONE-
BOOK and also the section SETTING FUNC-
TIONS - PAIRING YOUR MOBILE PHONE
88 BLUE&ME™ User’s Manual

Problem Probable Cause Possible SolutionWhen in close proximity of the car,
answering a phone call directly
using the mobile phone “answer”
button, will automatically activate
the hands-free communication
function (the caller ’s voice is
played through the car speakers)•Some types of mobile phones re-
quire you to set the phone to
choose between automatic incoming
call transfer to the system or non-
automatic incoming call transfer
(you will transfer the call using the
mobile phone keypad, as required)•Refer to your mobile phone owner ’s
manual to find out how to set up
the default location for phone audio
when a phone call is received
Pairing a paired mobile phone,
the display screen shows: Pair.
failed and the system says “Pair-
ing unsuccessful. Please try
again.”•Before re-pairing with a mobile
phone, information from the previ-
ous pairing onBLUE&ME™must
be deleted•Remember that the pairing proce-
dure will only need to be per-
formed once for your mobile phone.
After this procedure,BLUE&ME™
will automatically connect to your
phone each time you get into the
car and turn the ignition key to ON
•To pair the phone again, select DE-
LETE USERS and then re-pair the
phone – see the section SETTING
FUNCTIONS - MANAGING USER
DATA AND PHONEBOOK and also
the section SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE1
BLUE&ME™ User’s Manual 89

Problem Probable Cause Possible Solution
Some SMS messages or part of them
are not read, or are not correctly
read byBLUE&ME™hands-free
communication package•Some “special” characters within
received SMS messages cannot be
interpreted byBLUE&ME™•In this case nothing can be done
BLUE&ME™SMS message reader
displays sender telephone number
instead of sender name•Probably, during the mobile
phone pairing procedure step, you
chose not to download the tele-
phone book, or, if your mobile
phone only supports management
of single contacts, you chose to
download only some contacts•To download your cellular tele-
phone book from the Settings
menu select the Copy Phonebook
or Add Contacts option – refer to
SETTING FUNCTIONS, CELLU-
LAR TELEPHONE REGISTRA-
TION and USER DATA MAN-
AGEMENT paragraphs
Sometimes received SMS message
sender cannot be called•Some SMS messages, e.g., the
ones sent by telephone operator,
have no associated sender tele-
phone number, so option CALL
cannot be used•In this case nothing can be done
1
BLUE&ME™ User’s Manual 93

QUICK TIPS – FREQUENTLY ASKED QUESTIONS
What Can I Do With My BLUE&ME™ Hands-Free
Communication Package?
•
Make phone calls usingBLUE&ME™Hands-Free
Communication
•Listen to music from a USB stick or iPodthrough the
BLUE&ME™Media Player
•Read SMS Text Messages communicated through the
BLUE&ME™Message Reader (only available with
certain mobile phones)
•Control your FIAT TomTom PND (Personal Naviga-
tion Device) (If Equipped)
BLUE&ME™ Hands-Free Communication – Quick
Tips
•
If I have questions and cannot find the answer in the
BLUE&ME™User’s Guide, is there anyone I can call?
Yes, you can contact the FIAT Customer Center at
1-888-CIAO-FIAT (1-888-242-6342).
•If I know the series of commands I wish to make, is
there a way to avoid the voice command prompts?
Yes, it is called barging in. Simply press the
steering wheel button and say your first command,
then immediately after, press the
steering wheel
button again and say your second command.
Example – Press thesteering wheel button
and say “Settings”, then as soon as you hear the beep,
press the
steering wheel button again and say
“Pairing”.
108 BLUE&ME™ User’s Manual