2012 FIAT 500 ABARTH pairing phone

In addition, you can use other calling features, such as
responding to incoming calls, re-dial, callback, call wait-
ing, reading a message or deleting it.
NOTE:
•If you encounter difficulties with any of the voice
recognition operations, refer to HANDS-FREE COM-
MUNICATION PACKAGE - TROUBLESHOOTING.
•Before you can make and receive phone calls using the
hands-free communication package, you must create a
pairing relationship for your mobile phone.
•For further information refer to SETTING FUNC-
TIONS – PAIRING A MOBILE PHONE.
•To activate the hands-free communication package,
the ignition key must be turned to the ON position.
•If during a phone call you turn the ignition key to
STOP, you can continue your conversation through the
hands-free communication package for another15 minutes. After 15 minutesBLUE&ME™will sound
a warning tone and will transfer the call to the mobile
phone.
Making a Phone Call
You can make a phone call using one of the following
methods:
•Calling a contact in your phonebook
•Dialing a phone number using voice commands
•Dialing a phone number using the mobile phone
keypad
•Calling a phone number using call history (recent
calls)
•Calling the sender of a received SMS message
NOTE:For further information refer to FUNCTIONS
OF SMS MESSAGES READER, paragraph SMS MES-
SAGES MANAGEMENT
32 BLUE&ME™ User’s Manual

Calling a contact in your phonebook
It is a requirement that you create a pairing relationship
and download your mobile phone phonebook to the
hands-free communication system to use this dialing
feature.
To call a contact in your phonebook using manual
interaction, proceed as follows:
Press the
/MAINbutton on the steering wheel to
open the Main Menu.
Use the Scan Up
and Scan Downbuttons on the
rear of the steering wheel to selectPHONEBOOKand
then pressPRESET UP/OKbutton on the rear of the
steering wheel.
To select the alphabetical grouping which your contact’s
name belongs to, press thePRESET UP/OKon the rear of
the steering wheel, then select the required contact.If the contact has just one phone number, press the
PRESET/OKbutton or the
/MAINon the steering
wheel to start the call.
If the contact has multiple phone numbers, use the scan
up and scan down buttons on the rear of the steering
wheel to view the different phone numbers and then
select the required one by pressing thePRESET UP/OK
button or the
/MAINbutton on the steering wheel to
start the call.
To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Or, using voice interaction:
Assume you would like to call the contact “John Smith”
in your mobile phone phonebook.
Press and say“Call John Smith”or“Call John Smith
(on/at) Mobile”(in the previous statement, the keyword
“Mobile”represents the type of phone number you
1
BLUE&ME™ User’s Manual 33

“Delete”. The system will delete the last group of num-
bers and display the partially dialed phone number.
Then, you can say the digit group again and also the
remaining phone number digits.
To cancel the phone call, say“Cancel”.
To cancel the phone call and start dialing again, say
“Start over”.
To ask the system to repeat the recognized phone num-
ber, say“Repeat”. If no phone number was dialed, the
system says“No number available”.
If the repeated phone number is correct, say“Dial”to
start the call.
NOTE:When connected toBLUE&ME™and dialing a
phone number by voice commands, it is essential to
minimize background noise in the car and to ask the
other passengers to keep silent while you are speaking
the digits. Since the system is speaker independent, it canalso recognize other voices; there is a risk that some
numbers will be accidentally recognized, added to cor-
rect numbers or not recognized.
Dialing a phone number using the mobile phone
keypad
Alternatively, you can dial a phone number using your
mobile phone keypad and then continue your conversa-
tion using the hands-free communication system.
It is a requirement that you create a pairing relationship
and that the mobile phone is within range of the hands-
free communication system of your car.
To dial a phone number using your mobile phone key-
pad, proceed as follows:
•Dial the phone number on your mobile phone keypad
and connect the phone call following the procedure
required by your mobile phone.
36 BLUE&ME™ User’s Manual

the vehicle is moving, you can use voice commands only.
Instructions are provided for both methods.
NOTE:If you encounter difficulties with any of the
BLUE&ME™settings, refer to TROUBLESHOOTING.
Pairing a Mobile Phone
Before you can use your mobile phone with the hands-
free communication function on your car, you must
create a pairing relationship between the mobile phone
and the hands-free communication system.
During the pairing procedure, the hands-free communi-
cation system attempts to detect aBluetoothwireless
technology enabled mobile phone within range, and then
establishes the connection using a Personal Identification
Number (PIN). After a pairing relationship is established,
you can use the hands-free communication system to
make and receive phone calls, and do other operations
via your wirelessly-connected mobile phone.NOTE:Some mobile phones may require a setting
change or access permission change in order for
BLUE&ME™to automatically reconnect. See your mo-
bile phones manual for more information.
IMPORTANT!The mobile phone pairing PIN number is
a special PIN generated randomly at each new pairing
and used just for this operation. It is not your SIM PIN
and therefore it is not required to store or to keep it in
mind; losing it will not impair the hands-free communi-
cation system operation.
The pairing procedure will only need to be performed
once for your mobile phone. After this procedure
BLUE&ME™will automatically connect to your phone
each time you get into the car and turn the ignition key to
ON.
You can create a pairing relationship using thePAIRING
option in theSETTINGSmenu.
1
BLUE&ME™ User’s Manual 57

To create a pairing relationship using manual interaction,
proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
SelectPAIRINGand then press thePRESET UP/OK
button. The system will start the pairing procedure.
BLUE&ME™will show the mobile phone pairing PIN
on the instrument panel display and announces it. Please
note that this is a PIN used just for this operation; it is not
your SIM PIN.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select
BLUE&ME™(item that identifiesBLUE&ME™on your
car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display. If pair-
ing is successful, the system will say“Connecting”and
then the display will show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAIN
button or the
/ESCbutton will cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
After pairing, the system will say“Welcome”immedi-
ately after connecting. This message will no longer be
heard the next time the phone connects to the system.
The system will ask if you would like to copy your paired
phone’s phonebook. It is recommended to copy it. To
58 BLUE&ME™ User’s Manual

start copying the phonebook, press thePRESET UP/OK
button; otherwise press the
/ESCbutton. You can
download your phonebook at a later time using the
menu optionSETTINGS, USER DATA, or PHONE-
BOOK.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone then say“Pairing”.
The system shows the mobile phone pairing PIN on the
instrument panel display and repeats it.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select “
BLUE&ME™” (item that identifies the hands-free com-
munication package in your car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAINor
/ESCbuttons at this time may cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
The first time a phone connect to the system, the system
will say“Welcome”immediately after connecting. This
message will no longer be heard the next time the phone
connects to the system.
1
BLUE&ME™ User’s Manual 59

NOTE:
•You only need to pair your mobile phone a single time.
•You can pair up to five mobile phones, but only one
phone can be used at a time. To use one of the other
paired phones, the currently connected phone needs to
be powered off or it’sBluetoothsetting must be
turned off.BLUE&ME™will then search the paired
phone list looking for a phone to connect to.
•On your paired mobile phone, theBluetoothsetting
must be turned on in order to connect your mobile
phone withBLUE&ME™Hands-Free Communica-
tion.
•Before transferring your mobile phone contacts to the
hands-free communication system, make sure that
each contacts first and last name is unique and dis-
tinctly recognizable to improve the voice recognition
results.
•Depending on the size of your phonebook,
BLUE&ME™may take some time to download or
check for updates. So, if you try to immediately make
a phone call after getting into the vehicle, the
BLUE&ME™system may tell you to wait.
•The system will download only valid contact entries.
A valid contact entry must include both a name and at
least one phone number.
•If you would like to re-pair your mobile phone, delete
the old pairing relationship first. During this operation
all paired phones and their associated phonebook
information will be deleted. To delete a paired phone
from the system, from theUSER DATAmenu, select
DELETE USERS. On your mobile phone, delete
BLUE&ME™from the list ofBluetoothmobile
phones following the specific instructions for your
mobile phone (refer to your mobile phone owner ’s
manual).
1
BLUE&ME™ User’s Manual 61

•If you download a phonebook with a contacts list
including more than 1000 contacts, the system may
operate slower than expected and voice recognition of
the names in your phonebook may be degraded.
•If the pairing list is accidentally deleted, the pairing
procedure will be repeated.
Managing User Data
You can manage the user data used byBLUE&ME™by
entering theUSER DATAmenu. The phonebook can be
deleted, all paired phones and their associated phone-
book data can be deleted, or all data can be deleted. If all
data is deleted then the memory inBLUE&ME™will be
restored to it’s initial empty condition. If the phonebook
had not been previously downloads during the phone’s
initial pairing then you can choose to download it now or
you can copy individual contacts from you phone toBLUE&ME™. Not all phones support phonebook down-
loading or copying individual contacts. Consult www-
.fiatusa.com for further information on the list of com-
patible mobile phones.
To open theUSER DATAmenu using manual interac-
tion, proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
Select theUSER DATAand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”.Wait until
after the tone then say“User data”.
In theUSER DATAmenu you can perform the following
functions described below.
62 BLUE&ME™ User’s Manual