2011 SUBARU IMPREZA WRX STI Owners Manual

Black plate (203,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
! Seek tuning (SEEK)Type A and B audioType C audioIf you press the “
”or “
”side of the
“SEEK ”button briefly, the radio will auto-
matically search for a receivable station and stop at the first one it finds. This
function may not be available, however,
when radio signals are weak. In such a
situation, perform manual tuning to select
the desired station.
!
Scan tuning (SCAN)
Type A and B audio
Type C audioIf you press the “SCAN”button, the radio
will switch to the scan mode. In this mode,
the radio scans through the radio band
until a station is found. The radio will stop
at the station for 5 seconds while display-
ing the frequency, after which scanning
will continue until the entire band has been
scanned.
Press the “SCAN”button again to cancel
the SCAN mode and to stop at any
displayed channel.
Automatic tuning may not function prop-
erly if the station reception is weakened by
distance from the station or proximity to
tall buildings and hills.
Audio
5-13
– CONTINUED –
5

Black plate (204,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-14
Audio
! PTY (Program type) group tuning
(only FM reception)Type A and B audioType C audioPress the “PTY/CAT”button to change to
the PTY selection mode. At this time, the PTY group that you are currently listening
to will be displayed for 10 seconds. In the
PTY selection mode,
“PTY”is displayed
on the screen.
! PTY (Program type) group selection
Type A and B audio
Type C audioIn the PTY selection mode, press the
“FOLDER/PTY/CAT ”button “
”or “
”to
change the PTY group by one step at a
time.
Pressing “
”changes the PTY group up
by one step. Pressing “
”changes the
PTY group down by one step.
This operation only changes the display. It
does not change the station that is
currently being received.

Black plate (205,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
! Seek in PTY (Program type) groupType A and B audioType C audioIn the PTY selection mode, when the
desired PTY group has been selected,
pressing the “SEEK”button “
”or “
” seeks within that PTY group.
Pressing
“
”seeks up. Pressing “
”
seeks down.
The control function returns to the normal
mode after approximately 10 seconds.
& Displaying radio PS (Pro-
gram Service Name) and RT
(Radio Text)Type A and B audio
Type C audioIf the PS (Program Service Name) and/or
RT (Radio Text) are available, pressing
the “TEXT ”button changes the display
among PS, RT and frequency. The initial
setting is “PS”.NOTE.The maximum number of characters
that can be displayed for PS is 8.
. The maximum number of characters
that can be displayed for RT is 64.
. If RT is 13 characters or longer,
press and hold the “TEXT ”button for
0.5 second or longer in order to change
the page.
Audio
5-15
– CONTINUED –
5

Black plate (206,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-16
Audio
& Station presetPreset buttons (type A and B audio)Preset buttons (type C audio)
! How to preset stations
1. Press the “FM/AM”button to select
FM1, FM2, FM3 or AM reception.
2. Press the “
”or “
”side of the
“SEEK ”button or tune the radio manually
until the desired station frequency is
displayed.
3. Press one of the preset buttons for
more than 1.5 seconds to store the
frequency. If the button is pressed for less
than 1.5 seconds, the preceding selection
will remain in memory.
NOTE. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all stations stored in the
preset buttons are cleared. If this
occurs, it is necessary to reset the
preset buttons.
. If a cell phone is placed near the
radio, it may cause the radio to emit
noise when it receives calls. This noise
does not indicate a radio malfunction. !
Selecting preset stations
Presetting a station with a preset button
allows you to select that station in a single
operation. Up to six AM, FM1, FM2 and
FM3 stations each may be preset.

Black plate (207,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Satellite radio operation (if
equipped)To receive satellite radio, it is necessary to
install the SUBARU genuine satellite
receiver (optional equipment) and to enter
into a contract. For details, please contact
your SUBARU dealer.& XM
TM
satellite radio (U.S.A.
only)
XM
TM
is a continental U.S. based satellite
radio service, which includes music, news,
sports, talk and children ’s programming.
XM
TM
provides digital quality audio and
text information, including song title and
artist name. A service fee is required to
receive the XM
TM
service. For more
information, contact XMTM
at
www.xmradio.com or call 1-800-XM-
RADIO (1-800-967-2346).& Sirius satellite radioSirius satellite radio is a recent innovation
that allows the listener to experience
digital sound quality and to have a greater
variety of channels.
Use of satellite radio (Sirius) requires a
tuner, antenna and a service contract. For
details, please contact your SUBARU
dealer or visit Sirius Satellite Radio at
www.sirius.com or call 1-888-539-SIRIUS
(7474) for more information. Sirius, the
Sirius dog logo, channel names and logos
are trademarks of SIRIUS Satellite Radio
Inc.&Satellite radio receptionSatellite radio signals are best received in
areas with a clear view of the open sky. In
areas where there are tall buildings, trees,
tunnels or other structures that may
obstruct the signal of the satellites, there
may be signal interruptions. Other circum-
stances that may result in signal loss
include driving near a wall, steep cliff, hill
or driving on the lower level of a multi-
tiered road or inside of a parking garage.
To help reduce this condition, satellite
radio providers have installed ground-
based repeaters in heavily populated
areas. However, you may still experience
reception problems in some areas. !
XM
TM
satellite radio reception tips
for antenna on the windshield (for
U.S.A. only —if equipped)
For some models, the satellite radio
antenna is fixed to the upper right hand
corner of the windshield.
The XM
TM
satellite radio receiver that is
fitted to your vehicle receives the neces-
sary signals from two specially designated
satellites that are in a geostationary orbit
over the equator. One satellite covers the
east coast and the other covers the west
coast. Both of them direct their signals
north. These signals are then relayed
throughout the radio reception area by a
network of ground repeater stations. The
satellite radio signals are transmitted as
“line of sight ”signals. The line of sight
Audio
5-17
– CONTINUED –
5

Black plate (208,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-18
Audio
signals can be blocked by objects such as
buildings, but the network of repeater
stations allows signal coverage within
urban areas such as cities.
You may experience problems in receiving
XM
TM
satellite radio signals in the follow-
ing situations.
. If you are driving northward in a coastal
area
Because the satellite radio antenna is
located on the windshield, the signal
comes from the south and may not be
able to reach the antenna in some
circumstances when you are driving north.
. If you are driving in a tunnel or a
covered parking area
. If you are driving beneath the top level
of a multi-level freeway .
If you drive under a bridge
. If you are driving next to a tall vehicle
(such as a truck or a bus) that blocks the
signal
. If you are driving in a valley where the
surrounding hills or peaks block the signal
from the south
. If you are driving on a mountain road
where the southern direction is blocked by
mountains
. If you are driving in an area with tall
trees that block the signal (10 m or more),
for example on a road that goes through a
dense forest
. The signal can become weak in some
areas that are not covered by the repeater
station network.
Please note that these may be other unforeseen circumstances when there
are problems with the reception of XM
TM
satellite radio signals.&
Displaying satellite radio ID
of tunerWhen you activate satellite radio, you
should have your satellite radio tuner ID
ready because each tuner is identified by
its unique satellite radio tuner ID.
The satellite radio ID will be needed when
you activate satellite radio and receive
satellite radio customer support.
The satellite radio ID can be found on the
audio display by tuning the channel to “0”.
Turn the “TUNE/TRACK/CH ”dial to select
the satellite radio channel.NOTEFor Sirius, change the display to an
indication mode other than the channel
number after performing the above
operation.

Black plate (209,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
& Band selectionType A and B audioType C audioPush the “SAT”button when the radio is
off to turn on the radio.
Push the “SAT”button when the radio is on to select SAT1, SAT2 or SAT3 recep-
tion.
&
Channel and category selec-
tion! Channel selectionType A and B audio
Type C audioTurn the “TUNE/TRACK/CH ”dial clock-
wise to select the next channel and turn
the “TUNE/TRACK/CH ”dial counterclock-
wise to select the previous channel.
Audio
5-19
– CONTINUED –
5

Black plate (210,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-20
Audio
! Skip channel selectionType A and B audioType C audioWhen in the SAT mode, press the “SEEK”
button “
”or “
”continuously to
change to the channel selection mode. Pressing the
“SEEK”button “
”changes
the channel up by 10 steps each time.
Pressing “
”changes the channel down
by 10 steps each time.
! Category selection
Type A and B audio
Type C audioTo activate the category search mode,
press the “PTY/CAT ”button. To deactivate
the category search mode, press the
“PTY/CAT ”button again.Type A and B audio