Page 625 of 1062
To start charging:
1. Push the P position switch to place thevehicle in the P (Park) position and apply the
electric parking brake.
2. When charging the Li-ion battery, place the power switch in the OFF position. When the
power switch is in the ON position, the Li-
ion battery will not start charging.
3. Open the charge port lid and charge port cap. See “Charge port lid” and “Charge port
cap” in the “3. Pre-driving checks and
adjustments” section.
CAUTION
.Be sure to insert the charge con-
nector straight into the quick charge
port right up to the base. Failure to
do so may result in the Li-ion battery
not charging or could cause damage
to the charging equipment.
Page 626 of 1062
Page 627 of 1062
CAUTION
.As the quick charge connector is
heavier in comparison to the other
charge connectors, allowing it to
drop could cause damage to the
vehicle or charge connector or per-
sonal injury. When removing the
connector, be sure to pull it out
straight and as carefully as possible.
and
touch [Charging Timer].
CHARGING METHODS
Page 628 of 1062
Page 629 of 1062
Page 630 of 1062
Page 631 of 1062
(Zero Emission menu) button .
Page 632 of 1062