2011 HONDA ODYSSEY ac control

[x] Cancel search: ac control

Page 70 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual If it remains on af ter you have
fully released the parking brake
while the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more inf ormation, s

Page 72 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Itcomesonasareminderthatyou
have turned off the vehicle stability
assist (VSA) system.
This indicator comes on brief ly when
you turn the ignition switch to the
ON (II) position. It will then go of f

Page 74 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual CONT INUED
This indicator normally comes on f or
a f ew seconds when you turn the
ignition switch to the ON (II)
position.
This indicator has two f unctions:If it comes on while driving, it
indicates

Page 76 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual If this indicator comes on when the
ignition switch is turned to the ON
(II) position and the parking brake is
released, it means there is a problem
in the high beam headlight’s circuit.
Have your v

Page 78 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button on the
steering wheel (see page ).
This indicator comes on when you
set the cruise control. See pagef o

Page 80 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual This shows the temperature of the
engine’s coolant. During normal
operation, the pointer should rise
from the bottom mark to about the
middle of the gauge. In severe
driving conditions, such as very

Page 82 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual When either of the trip meters (trip
A or B) is displayed, your vehicle’s
average f uel economy since you last
resetthattripmetercanbeshown
on the inf ormation display (mpg on
U.S. models and l/100

Page 84 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual µµµµ
µµ µ
µ µ
µ
Select the outside temperature
display by pressing and releasing the
select/reset knob. Press and hold
the same knob f or a f ew seconds to
enter this setting, then