2010 Peugeot 407 Owner's Manual

3COMFORT
48
REAR VIEW MIRROR
Automatic day/night rear view
mirror
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
DOOR MIRRORS
Objects observed in the driver
and passenger mirrors are, in re-
ality, closer than they appear.
This must be taken into ac-
count in order to judge the distance of
vehicles approaching from behind cor-
rectly.
Folding back the mirrors
electrically
- from inside:

 With the ignition on, move the
control A to the central position
then pull it rearwards.
- from outside:
 Lock the vehicle using the re-
mote control * or the key.

 This function can be deactivated.
Consult a PEUGEOT dealer.
When the vehicle is parked, the door
mirrors can be folded back manually.
* According to version.
Adjustment

 Move control A to the right or to
the left to select the corresponding
mirror.

 Direct control B in all four direc-
tions to adjust.

3COMFORT
49
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
lightens automatically when reverse
gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror. MANUAL ADJUSTMENT OF STEERING WHEEL HEIGHT AND REACH
When the vehicle is stationary, unlock
the steering wheel adjustmment by
pushing the lever forwards.
Adjust the height and reach of the
steering wheel then lock the adjust-
ment by pulling the lever fully back.

3COMFORT
49
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
lightens automatically when reverse
gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror. MANUAL ADJUSTMENT OF STEERING WHEEL HEIGHT AND REACH
When the vehicle is stationary, unlock
the steering wheel adjustmment by
pushing the lever forwards.
Adjust the height and reach of the
steering wheel then lock the adjust-
ment by pulling the lever fully back.

3COMFORT
50
FRONT SEATS
Manual mode
Longitudinal adjustment
Lift the control bar and slide the seat
forwards or backwards. Driver's seat cushion height and
angle adjustment
Pump up or down to the required
position. Seat back angle adjustment
Operate the lever for your comfort.

3COMFORT
51
Electric mode
Longitudinal adjustment
Push the control forwards or back-
wards to slide the seat. Driver's seat cushion height and
angle adjustment

Height: tilt the rear of the control up
or down.

Tilt: tilt the front of the control up or
down. Seat back angle adjustment
Tilt the control forwards or backwards
for your comfort.
The electrical functions of the driver's seat are deactivated o ne minute after the ignition is switched off.
To reactivate them, open the door or switch on the ignitio n.

3COMFORT
52
Head restraint height and angle
adjustment Front seat active head restraint
This system prevents "whiplash".
In the event of a rear impact, the action
of the body on the seat back moves
the head restraint forwards and up-
wards preventing the head from being
thrown back.
Front armrest
Driver's seat lumbar adjustment
Heated seats adjustment

0 : Off.

1 : Low.
2 : Medium.

3 : High. The adjustment is correct when
the top of the head restraint is
aligned with the top of the head
of the occupant of the seat.
Never drive with the head re-
straints removed and stored in
the vehicle. This is dangerous
and they may be thrown in the
event of sharp braking. They must be
in place and adjusted correctly. To change the position of the armrest:

 Lift the handle 1 .
The armrest folds forwards and up-
wards.
To return to the initial position, push
the armrest backwards and press it to
engage.
Operate the lever to obtain the correct
position.
To raise or lower the head restraint,
pull it forwards then slide it.
To tilt the head restraint, tilt the lower
part forwards or backwards.
To remove the head restraint, move it
almost to the highest position, lift the
tab using a coin and pull it forwards
and upwards at the same time.
To refi t the head restraint, engage the
stalks in the holes keeping in line with
the seat back.
With the engine running, turn the dial.
The temperature of the seat is regu-
lated automatically.

3COMFORT
53
REAR SEATS (SALOON)

Note: the seat cushion 1 can be re-
moved with care to increase the vol-
ume of the load space.
Squeeze the seat cushion fi xings to
detach them from their fastenings.
When repositioning:

 fold up the seat back 2 and lock it
(the red marker of control 3 should
no longer be visible),

 fold up the seat 1 ,

 refi t the head restraints if they were
removed. Locking/unlocking the access
to the boot via the rear seats
Your vehicle's boot can be isolated
from the passenger compartment.
The red indicator on the control
3
should no longer be visible. If it is,
push the seat fully.
Insert the ignition key in the lock 4 .
Take care not to trap the seat
belt and to position the tongue
of each strap correctly in its
respective clasp before folding
down the seat back. This will enable
you to reposition the seat backs with
their seat belts and clasps ready to ac-
commodate your rear passengers.
To fold down the rear left seat or the
rear right seat, always start with the
seat cushion, never with the seat back
(risk of damage):

 move the front seat(s) forward if
necessary,

 place the head restraints in the low
position or remove them if necessary,
Check that the seat belt strap is posi-
tioned correctly at the side of the seat
back,
Ensure that the outer seat belt tongues
are engaged in their claps (the centre
seat belt must not be fastened),

 lift the front of the seat cushion 1 ,

 tilt the seat cushion 1 against the
front seat(s),

 pull control 3 forwards to unlock
the seat back 2 ,

 fold down the seat back 2 .

3COMFORT
54
REAR SEATS (407SW)

Note: the seat cushion 1 can be re-
moved with care to increase the volume
of the load space.
Squeeze the seat cushion fi xings to
detach them from their fastenings.
When repositioning:

 fold up the seat back 2 and lock it
(the red marker of control 3 should
no longer be visible),

 fold up the seat 1 ,

 refi t the head restraints if they were
removed. Take care not to trap the seat
belt and to position the tongue
of each strap correctly in its
respective clasp before folding
down the seat back. This will enable
you to reposition the seat backs with
their seat belts and clasps ready to ac-
commodate your rear passengers.
To fold down the rear left seat or the
rear right seat, always start with the
seat cushion, never with the seat back
(risk of damage):

 move the front seat(s) forward if
necessary,

 place the head restraints in the low
position or remove them if necessary,
Check that the seat belt strap is posi-
tioned correctly at the side of the seat
back,
Ensure that the outer seat belt tongues
are fastened in their clasp (the centre
seat belt must not be fastened),

 lift the front of the seat cushion 1 ,

 tilt the seat cushion 1 against the
front seat(s),

 pull control 3 forwards to unlock
the seat back 2 ,

 fold down the seat back 2 .