2010 MITSUBISHI LANCER MMCS Manual

Calendar 9-2 5 Enter a short description of the
special day, and touch [Set]
>>> “How to Enter Text” (page 2-13)
eng_a145
NOTE Up to 30 characters can be entered for one memo. 6 Touch [Set]
The special day settings are completed.
Editing Special Days
Editing a special day that has been set.
1 Touch the date to be edited
eng_a146
2 Touch [Icon] or [Memo] to edit
eng_a147
The remaining operations are the same as from step 2
of “Setting Special Days” (page 9-1)
Deleting Special Days
Deleting a special day that has been set.
1 Touch the special day to be
deleted
eng_a146
2 Touch [Delete]
eng_a147
3 Touch [Yes]
eng_a148

The special day deletion is completed.






 


Calendar 9-3
Information
Setting Anniversaries
Setting a new anniversary (birthday. etc.).
A maximum of 20 anniversaries can be set. 1 Touch [Anniversary]
eng_a141
2 Touch [New Event]
eng_a149
NOTE Multiple anniversaries can be set for the same day.
 When several anniversaries are set for the same
date, the rst anniversary that was set will be given
priority and the icon will be displayed. 3 Touch [Icon]
eng_a150
4 Touch one of the icons
eng_a143
5 Touch [Date]
eng_a151
6 Touch [
] or [ ] to set the
month or day
eng_a152
7 Touch [Memo]
eng_a153
8 Enter a short description of the
anniversary, and touch [Set]
>>> “How to Enter Text” (page 2-13)
eng_a154
NOTE Up to 30 characters can be entered for one memo. 9 Touch [Set]
eng_a155

The anniversary settings are completed.






 


Calendar 9-4
Editing Anniversaries
Editing an anniversary that has been set.
1 Touch [Anniversary]
The anniversary list is displayed. 2 Touch the anniversary to be
edited
eng_a156

eng_a157
The anniversary setting screen is displayed.
The remaining operations are the same as from step 3
of “Setting Anniversaries” (page 9-3)
Deleting Anniversaries
Deleting an anniversary that has been set.
1 Touch [Anniversary]
The anniversary list is displayed. 2
Touch the anniversary to be deleted
eng_a156

The anniversary setting screen is displayed. 3 Touch [Delete]
eng_a157
4 Touch [Yes]
eng_a158

The anniversary deletion is completed.










Trip 9-5
Information
Trip
Trip information can be viewed and set.
1 Press the [INFO] key, and touch
[Trip]
eng_a140

eng_a208
The trip screen is displayed.
The average speed, Average Fuel Economy, and
Instant Fuel Economy information can be viewed.NOTE Touch [Graph] to view
the average speed and
average fuel economy
as a graph, measured
in 5-minute units.
eng_a211
 Touch [Manual] to change the reset mode to “Manual
Reset Mode”.
>>> “Reset Mode” (page 9-5)
2 Touch [
]

eng_a209
The 2/3 trip screen is displayed.
The distance to empty, distance driven after refueling
and driving time can be viewed. 3 Touch [
]

eng_a210
The 3/3 trip screen is displayed.
The lap time can be measured. >>> “Lap Time” (page 9-6)
Reset Mode
Two reset modes are available:
- Auto Reset Mode automatically resets
the average speed and average fuel
economy, four hours after the ignition
switch is turned OFF.
- In Manual Reset Mode, you can reset
the items when desired.
Changing the Reset Mode
1 Display the 1/3 Trip screen
2 Touch [Manual]
eng_a208

eng_a212
“Auto Reset Mode” is changed to “Manual Reset
Mode”.










Trip 9-6NOTE Touch [Auto] to return to “Auto Reset Mode”.
 In “Manual Reset Mode” or “Auto Reset Mode”,
touch [Reset] to reset the average speed and
average fuel economy.
Driving Distance and Time
The distance to empty, distance driven
after refueling and driving time can be
viewed on the 2/3 Trip screen.
Distance to EmptyThe displayed distance to empty is calculated from
the current remaining fuel and the recent average fuel
economy.Distance Driven After RefuelingDisplays automatically the distance driven after
refueling.
It is reset when the vehicle is refueled.NOTE If the amount of fuel added is less than approximately
2.6 gallons (10 litres), automatic reset will not be
performed. Press [Refuel] to reset.Driving TimeMeasures the time from when the ignition switch is
turned “ON” to when it is turned “OFF”.
It is reset when the ignition switch is turned from “OFF”
to “ON”.
Lap Time
Time, distance, speed and mileage can be
measured.
1 Display the 3/3 Trip screen
2 Touch [Start]
eng_a210

Total Line
eng_a213
The measurement starts. At this time, the speed and
mileage are being measured, so they are not displayed. 3 Touch [Lap]

eng_a214
The current measurement results are displayed in “A”.
NOTE Touch [Lap] again
and the measurement
results displayed in
“A” are moved to
“B”, and the current
measurement results
are displayed in “A”.
eng_a215
4 Touch [Stop]

eng_a216
The measurements stop and the measurement results
are displayed in the total line.NOTE Touch [Start] to restart the measurements from
where they stopped.
 The measurements stop if the ignition switch is
turned “OFF” during measurement. If this happens,
the measurements restart when the ignition switch is
turned “ON”. 5 Touch [Reset]






 


Trip 9-7
Information
6 Touch [Yes]
eng_a217

eng_a210
All the measurement results are reset.NOTE If the measured time exceeds 20 hours (19:59:59),
the measurement is reset automatically.






 


Environment 9-8
Environment
The outside air temperature, altitude, and air
pressure can be viewed.
1 Press the [INFO] key, and touch
[Environment]
eng_a140

eng_a218
NOTE The display graph displays the latest information in
5-minute units.
 The units can be changed from Fahrenheit to
Celsius, and from “ft” to “m”. Refer to “Unit” in “System Settings” (page 10-5)
.






 


Maintenance 9-9
Information
Maintenance
Maintenance timing alerts can be set, such as
for the engine oil and oil filter change.
1 Press the [INFO] key, and touch
[Maintenance]
eng_a140

eng_a220
The maintenance list screen is displayed.NOTE Items that have passed their maintenance timing or
maintenance distance are displayed in a different
color.
Setting the Maintenance Timing
An item can be selected to set the maintenance
timing. 1 On the maintenance screen,
touch the item to be set
eng_a220
The maintenance information screen of the selected
item is displayed.NOTE “Date” displays the date on which the maintenance
was performed.
 “Changed at Odometer” displays the odometer value
at the time of maintenance.
 “Remaining Distance” displays the distance until the
next maintenance timing. 2
Touch [Setup] in the “Maintenance
Fixed Date” settings
eng_a221
NOTE If [USER1], [USER2], or [USER3] has been selected
in Step 1, the item name can be entered by selecting
[Set Name].
 Touch [Default] to return to the factory settings.
 “Maintenance Fixed Date”is used to set the distance
from the performance of maintenance to the time of
the next maintenance.
 “Maintenance Distance” is used to set the number of
months from the performance of maintenance to the
time of the next maintenance. 3 Touch [
] or [ ]to set the next
maintenance date
eng_a222
4 Touch [Set]
The “Maintenance Fixed Date” settings are completed. 5 Touch [Setup] in “Maintenance
Distance”
eng_a221