2010 MERCEDES-BENZ SLS COUPE Owners Manual

X
Select YesorNo.
If you select Yes, a selection list will appear
containing the five existing numbers.
X Select the number to be overwritten.
The input menu with the data field for enter-
ing the new telephone number appears.
X To enter digits: select the digits one after
the othe rfrom the inpu tspeller.
or
X Press the corresponding number keys.
X To move the cursor in the data field:
select 0018or0019.
X To delete individual digits: select0004and
briefly press 0017.
or
X Press the 0013button next to the
COMAND controller.
The digit to the left of the cursor is deleted.
X To delete an entire entry: select0004and
press and hold down 0017until the entry has
been deleted.
or
X Press and hold down the 0013button next
to the COMAND controller until the entry is
deleted.
X To save the entry: select0005. Using call lists
COMAND displays calls received (including
missed calls) and made during phone opera-
tion in lists.
i The respective menu item can only be
selected if calls have already been made or
received in COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Selecting an entr yfrom the call list X
Select Call lists fromt he telephone
basic menu.
Am enu appears. X
Select Incoming calls orCalls dial‐
led.
The corresponding list appears.
or
X When the telephone basic menu is dis-
played, press the 0016button on COMAND
or the 001Cbutton on the multifunction
steering wheel.
The Calls dialled list appears. Example display: list of calls made
0001
To close the list
0002 Date/time and phone number of the
selected entry
0015 To call up options
i When the list is called up with the 0016but-
ton, it only displays the telephone numbers.
i Incoming calls which you could not or did
not want to answer are marked with a sym-
bol in front of the name or phone number.
X To select alist entry: turn002800130029or slide
001F0013000D .
X To close the list: selectBack.
or
X Press the 0001back button next to the
COMAND controller.
Deleting call lists i
The stored call lists remai ninCOMAND,
even if you use COMAND with another
mobile phone. For this reason, delete the
call lists before selling or transferring own-
ership of your vehicle. 142
TelephoneCOMAND APS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 142

X
Select Call lists 0004Delete call
lists from the telephone basic menu.
Aq uery appears asking if all call lists are to
be deleted.
X Select YesorNo.
The call lists will either be deleted or not,
depending on your selection.
Displaying details about a list entry COMAND can also show a shortened list entry
in full.
X
Select the list entry.
X Select Options0004Details .
The detailed view appears.
X To get back to the list: slide002B0013002Cuntil
the list is highlighted.
or
X Press the 0001back button next to the
COMAND controller.
Storing a list entry which has not yet
been stored Fo
rincoming calls from a perso nwho is not
in the address book, COMAND displays the
phone number in the call list. You can save
this entry.
Storing as anew entr yin the address book
X Select the list entry.
X Select Options 0004Save 0004New entry.
i Save has no function if the selected list
entry is already stored in the address book.
X Select a number category, e.g. Home.
X Select a telephone category, e.g. Mobile.Number category Display (telephone
and address book)
Not classified °
Home 001E
Work \ Telephone cate-
gory Display (telephone
and address book)
Not classified °
Mobile ¢
Car ^
X
Select Save.
An input menu appears with data fields. The
data field for the telephone number is filled
in automatically. The data field for the sur-
name is also filled in automatically if the
entry to be stored contains a name. 0001
Cursor
0002 Data field
0015 Input speller
0014 Data field for telephone number (filled in
automatically)
0012 Telephone category
0013 Number category
X For the following operatin gsteps:
R switching the data field
R entering data
R deleting an entry
R cancelling an entry
R storing an entry
proceed as described in the "Creating a
new phone book entry" section
(Y page 140). Telephone
143COMANDAPS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeuV ersion: 3.0.3.6
2010-05-07T14:19:43+02:00 - Seite 143 Z

Adding
atelephone number to an existing
phone book entry
X Select the list entry.
X Select Options 0004Save 0004Add tele‐
phone no.
i Save has no function if the selected list
entry is already stored.
X Select a number category, e.g. Home.
X Select a telephone category, e.g. Mobile.
X Select Save.
The search menu for addres sbook entries
appears.
X Search for the desired entry.
i There is a detailed description of how to
search for an address book entry in the
"Searching for an address book entry” sec-
tion (Y page 152).
X Press 0017when you have finished searching.
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
You will see a message to this effect.
If five numbers are stored for the entry you
are searching for, a prompt will appear ask-
ing whether you wish to overwrite one of
the existing numbers.
X Select YesorNo.
If you select Yes, a selection list with the
five existing numbers is displayed.
X Select the number to be overwritten.
COMAND overwrites the selected number
with the new data. Telephone operation
Incoming call Rejecting or accepting
acall
When there is an incoming call, you see a
window in the display. X
To reject: selectReject .
or
X Press the 0014button on the COMAND con-
trol panel or the 0015button on the multi-
function steering wheel.
X To accept: selectAccept .
or
X Press the 0016button on the COMAND con-
trol panel or the 001Cbutton on the multi-
function steering wheel.
Once you have accepted the call, you can
conduct you rtelephone call using the hands-
free system. The call volume can be adjusted
(Y page 67). For more information, see the
"Functions during a single call connection"
section (Y page 145).
i Either the phone number, the phone num-
ber and name (if there is an entry for the
number in the address book) or Unknown(if
the telephone number is withheld) appears
in the display.
i You can also accept a call as described
above when COMAND is showing the dis-
play of a differen tmain application. The
display switches to the telephone display
after you accept the call. After the call is
finished, you see the display of the previous
main applicatio nagain.
Making an outgoing call Entering
atelephone number using the
number keypad
X Call up the telephone basic menu.
X Select the required digits in sequence on
the number keypad.
X To delete an individual digit: press001F.
X To delete an entire phone number: press
and hold the 001Fbutton until the number is
deleted.
X To place acall: press the 0016button on the
COMAND control panel or press the 001C
button on the multifunctio nsteering wheel. 144
TelephoneCOMAND
APS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeuV ersion: 3.0.3.6
2010-05-07T14:19:43+02:00 - Seite 144

i
You can also enter a phone numbe rusing
LINGUATRONIC (see separate operating
instructions).
Entering the telephone number using the
COMAND controller
X Call up the telephone basic menu.
X To enter digits: select the digits one after
the other from the input speller.
X To delete an individual digit: select0004in
the input speller and press 0017briefly.
or
X Press the 0013button next to the
COMAND controller.
X To delete an entire number: select0004
and press and hold down 0017until the entry
has been deleted.
or
X Press and hold down the 0013button next
to the COMAND controller until the entry is
deleted.
X To make a call: select°on the bottom
right-hand side of the input speller.
or
X Press the 0016button on the COMAND con-
trol panel or the 001Cbutton on the multi-
function steering wheel.
i You can also use LINGUATRONIC to enter
a phone number and to make a call (see
separate operating instructions).
Redialling
X Call up the telephone basic menu.
X Select °at the bottom right-hand side of
the speller.
or
X Press the 0016button on the COMAND con-
trol panel or the 001Cbutton on the multi-
function steering wheel when the tele-
phone basic menu is displayed.
The list of dialled numbers appears. The
most recently dialled number is at the top. X
To select acall: turn 002800130029or slide
001F0013000D .
X To place acall: press the 0016button on the
COMAND control panel or press the 001C
button on the multifunctio nsteering wheel.
Connecting acall to an entry on acall list
or in the COMAND phone book
X Call up a call lis tand select an entry
(Y page 142).
or
X Call up the COMAND phone book and
select an entry (Y page 137).
X To connec tacall:press 0017.
Functions available during asingle call
connection Telephone operation during a single call connec-
tion
0001
Perso nyou are calling
0002 Icon for active telephone connection
0015 To switch hands-free microphone on or
off
0014 To send DTMF tones (not possible with all
mobile phones)
0012 To end a call Telephone
145COMAND APS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 145 Z

Switching the hands-free microphone on/
off
X Call up the telephone basic menu.
X To switch off: selectMike off.
If the microphone is switched off, the 000E
icon appears in the main area.
X To switch on: selectMike on.
The 000Esymbol goes out.
DTMF tone transmission
i This function is not supported by all
mobile phones.
Answering machines or other devices can be
controlled by DTMF tones, e.g. for remote
query functions.
X To send individual characters: select the
desired characters during a call.
or
X Press the corresponding button on the
COMAND control panel.
Every character selected will be transmit-
ted immediately.
X To send a phone book entry as a char-
acter string: selectName.
X Select the desired phone book entry.
The entry is immediately sent as a charac-
ter string.
X To switch back to the call display: select
Back.
Ending an active call
X If the menu of another main function is
shown, switch the display to the telephone
function.
X To end a call: select002D.
or
X Press the 0014button on the COMAND con-
trol panel or the 0015button on the multi-
function steering wheel.
Rejecting or accepting awaiting call
i The "call waiting" function must be sup-
ported by the network provider and be ena-
bled. If you are on the telephone and you receive
anothe
rcall, the call waiting display will
appear .You also hear an acoustic signal.
X To reject: selectReject.
or
X Press the 0014button on the COMAND con-
trol panel or the 0015button on the multi-
function steering wheel.
X To accept: selectAccept.
or
X Press the 0016button on the COMAND con-
trol panel or the 001Cbutton on the multi-
function steering wheel.
This ends the active call.
If you accept the waiting call using the mobile
phone, the active call will be put on hold. You
then have two calls. The call you have just
accepted is active.
Transferring acall (convenience teleph-
ony*) From the hands-fre
esystem to the mobile
phone
X Take the mobile phone out of the
bracket*.
The Telephone not inserted display
appears in the COMAND display. Subse-
quent operation is only possible using the
mobile phone.
From the mobile phone to hands-free
mode
X Insert the mobile phone into the bracket*.
Once the call has been transferred to
hands-free mode, all the functions will be
available to you which are described in the
"Functions during a single call connection"
section (Y page 145). 146
TelephoneCOMAND APS
*o
ptional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 146

Tex
tmessage (convenience teleph-
ony*)
Tex tmessage (SMS) functions The following text message functions are
available:
R receive
R read
R manage
The following conditions must be fulfilled in
orde rto use the functions:
R the mobile phone is inserted in the
bracket *and switched on
R the PIN has been entered.
R the mobile phone is logged into a mobile
phone network.
Whe nthe mobile phone is connected, the 30
most recent text messages which are cur-
rently stored on the phone are loaded to the
COMAND's text message (SMS) inbox and
displayed.
i COMAND does not load the most recent
text messages:
This may occur in exceptional circumstan-
ces, for example when using certain mobile
phone brackets* and when the mobile
phone inbox holds many text messages.
When the mobile phone is connected to
COMAND via the bracket*, newly received
text messages are displayed in COMAND's
text message inbox. An audible signal can
also be heard and the 0022symbol appears.
Displaying the text message (SMS)
inbox X
Press the 0008function button.
X Select SMS.
The text message (SMS) inbox appears. Text message inbox
0001
Shortened text or sender of the selected
text message (depending on setting)
0002 Reception date and time of the selected
text message
0015 To call up options
0014 Highlighted text message
0012 001C Icon for unread text message (SMS)
0013 To return to the telephone basic menu
Switching the display
You can switch between displaying the
sender of the text message (SMS) and text
display.
The sender display shows the sender of the
message. If the sender is stored in the
COMAND phone book, the name is displayed.
The text display shows the first few words of
a text message (SMS).
X To switch to text display: selectOptions
0004 Display text.
The view changes.
X To switch to sender display: select
Options 0004Display sender.
X The view changes.
Selecting atext message
X To select: slide001F0013000Din the list.
Displaying details
COMAND can also show a shortened sender
display in full. Telephone
147COMAND APS
*optional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 147 Z

X
Select a text message (SMS) from the list.
X Select Options0004Details .
The detailed view appears.
X To close the detailed display: slide
002B0013002C .
or
X Press the 0001back button on the
COMAND controller.
Returning to the telephone basic menu
X Select Back.
Reading atext message X
Select a text message (SMS) from the text
message (SMS) inbo xand press 0017.
The text message appears.
X To scroll through the display or select
telephone numbers in the text: turn
002800130029or slide 001F0013000D.
The display scrolls up or down line by line,
or skips to the next or previous telephone
number and automatically highlights it.
X To return to the list: press0017and select
Back.
Listening to atext message (SMS)
i You can set the language (Y page 78)and
the speed of the read-aloud function
(Y page 73).
X While the text message (SMS) is displayed,
press 0017and select Read aloud.
COMAND reads ou tthe text message.
X To cancel the read-aloud function: press
the 000Bbutton.
or
X Press 0017and select Cancel read-aloud
function. Managing text messages Calling
atext message sender
X While the tex tmessage (SMS) is displayed,
press 0017and select Call sender.
The telephone makes the call to the sender.
Calling telephone numbers in the text
You can use numbers in the text if they are
red and underlined.
i It may occur that ahighlighted numerical
sequence cannot be called.
X When the tex tmessage (SMS) appears,
select a number that can be used. 0001
Usable telephone number
X Press 0017and select Use.
X Select Call.
The call is made.
i You can use the "New entry" and "Add
no." functions to save this telephone num-
ber or to add it to an existing entry.
Storing the sender as anew address book
entry
i This function is not possible if the
sender’s telephone number is already
stored in the address book.
X Press 0017and select Save number 0004New
entry.
X Select a number category, e.g. Home.148
TelephoneCOMAND APS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbae uV ersion: 3.0.3.6
2010-05-07T14:19:43+02:00 - Seite 148

X
Select a telephone category, e.g. Mobile.
X Select Save.
The input menu with data fields appears.
The data field for the telephone number is
filled in automatically. 0001
Cursor
0002 Data field
0015 Inpu tspeller
X Proceed from the step "To change the data
field" in the "Creating anew address book
entry" section (Y page 151).
Storing atext message (SMS) sender in an
existing address book entry
X Press 0017and select Save number 0004Add
telephone no.
X Proceed fro mthe step "Selecting a number
category" in the "Importing to an existing
address book entry" section (Y page 141).
Deleting atext message
The function deletes the tex tmessage (SMS)
in COMAND and on the mobile phone.
i This function is not supported by all
mobile phones.
X Select a textm essage from the SMS inbox.
X Select Options 0004Delete.
Ad eletion prompt appears.
X Select YesorNo.
The textm essage will either be deleted or
not, depending on your selection. Using the address book
General notes The address book organises and stores
entries which are entered from differen
tsour-
ces (mobile phone, PCMCIA memory card,
COMAND telephone book, navigation func-
tion).
You can use these entries to make telephone
calls and for navigation.
i Address book entries are not deleted
when the mobile phone is removed. For this
reason, you should delete your personal
data using the reset function before selling
your vehicle, for example (Y page 78).
Calling up the address book From another main mode
X
Select Tel0004Tel 0004Address book.
i If the address book was last opened with
the telephone function, you only need to
select Tel.
From telephone mode
X Select Tel0004Address book.
The address book basic display appears. Address book with address book entry
¥and nav-
igable data ¤
i Each address book entry may contain up
to five telephone numbers and one private
and one business address. Telephone
149COMAND APS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 149 Z