Page 1497 of 3039
5. CAUTION: Make sure the torque converter is fully
located into the oil pump drive.
6. CAUTION: Make sure that the torque converter
remains in the transmission.
NOTE: Some variation in the illustrations may occur,
but the essential information is always correct.
Raise the powertrain assembly jack and transmission
assembly. www.JagDocs.com
Page 1498 of 3039
7. NOTE: Transmission shown removed for clarity.
Torque: 48 Nm
8. Torque: 48 Nm 9. Torque: 48 Nm
Page 1499 of 3039
10. Torque: 45 Nm
11.
Remove the support.
12.
13. Torque: 110 Nm
CAUTION: Only rotate the crankshaft clockwise.
NOTE: Make sure that the alignment mark is visible
through the inspection hole as illustrated.
Torque: 63 Nm
Page 1501 of 3039
17.
18.
19.
Torque: 10 Nm
CAUTION: Install new o-ring seals
Torque: 10 Nm
Page 1507 of 3039
13.
14.
Make sure that the alignment mark is visable
through the inspection hole on removal of the last
torque converter bolt.
15.
WARNING: Make sure that the transmission is secured with
suitable retaining straps.
Using a suitable stand, support the transmission.
Page 1510 of 3039
22. CAUTION: Make sure that the torque converter
remains in the transmission.
NOTE: This step requires the aid of another
technician.
Install the torque converter retainer.
Page 1511 of 3039
Published: 11-May-2011
Automatic Transmission/Transaxle - TDV6 3.0L Diesel /V8 5.0L Petrol/V8 S/C 5.0L Petrol - Transmission V8 5.0L Petrol/V8 S/C 5.0L Petrol
Installation
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
1. CAUTION: Make sure that the torque converter
remains in the transmission.
NOTE: Some variation in the illustrations may occur,
but the essential information is always correct.
Raise the powertrain assembly jack and transmission
assembly.
2. NOTE: Transmission shown removed for clarity.
Torque: 48 Nm
3. Torque: 48 Nm
Page 1512 of 3039
5. Torque: 45 Nm
6. Remove the support.
7. Torque: 110 Nm
