2010.5 Citroen C4 PICASSO Owner's Manual

320
09
BLUETOOTH TELEPHONE
Connect/Disconnect a device
Consult the paired device
BLUETOOTH CONFIGURATION
Telephone function
Audio Streaming function
Delete a paired device
Perform a Bluetooth search
Calls list
CALL
Directory
Terminate the current call
MANAGE THE TELEPHONE CALL
Activate private mode
SCREEN MENU MAP
1
2
3
3
3
4
4
4
2
3
4
2
3
3

321
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWERSOLUTION
There is a difference in sound quality between the different audio sources (radio, CD...).
For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing so urce (radio, CD...).
Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or t o the "Inactive" position in radio mode.
The CD is ejected automatically or is not played by the player.
The CD is inserted upside down, is unplayable, does not co ntain any audio data or contains an audio format which the player cann ot play.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
- Check that the CD is inserted in the playerthe right way up.
- Check the condition of the CD: the CD cannot be played if it is too damaged.
- Check the content in the case of a recorded CD: consult the advice in the "Audio" section.
- The audio equipment's CD player does not play DVDs.
- Due to their quality level, certain writeable CDs will not be played by the audio system.
The message "USB peripheral error" is displayed on the screen.
The Bluetooth connection is cut.
The battery of the peripheral may not be suffi ciently charged. Recharge the battery of the peripheral device.
The USB memory stick is not recognised.
The memory stick may be corrupt. Reformat the memory stick.
The CD player sound is poor.
The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions.
The audio equipment settings (bass, treble, ambiences) are unsu itable. Set the treble or bass level to 0, without selecting an ambience.

322
QUESTIONANSWERSOLUTION
The stored stations do not function (no sound, 87.5 Mhz is displayed...). An incorrect waveband is selected. Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on whichthe stations are stored.
The traffi c announcement (TA) is displayed. I do not receive any traffi c information.
The radio station is not part of the regional traffi c information network. Tune to a radio station which broadcasts traffi c information.
The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...).
The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
The environment (hills, buildings, tunnels, basement car parks.. .) block reception, including in RDS mode. This phenomenon is normal and does not indicate a failure of the audio equipment.
The aerial is absent or has been damaged (for example when g oing through a car wash or into an underground car park). Have the aerial checked by a CITROËN dealer.
Sound cut-outs of 1 to 2 seconds in radio mode. During this brief sound cut-out, the RDS searches for any freque ncy permitting better reception of the station. Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
With the engine off, the audio equipment switches off after a few minutes of use.
When the engine is switched off, the audio equipment operating time depends on the battery charge.
The switch-off is normal: the audio equipment switches to eco nomy mode and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery charge.
The message "the audio system is overheated" appears on the display.
In order to protect the installation if the surrounding temperature is too high, the audio equipment switches to an automatic therma l protection mode leading to a reduction of the volume or stopping of the playing of the CD.
Switch the audio system off for a few minutes to allow the system to cool.

323
For reasons of safety, the driver should only carry out operations which require prolonged attention while the vehicle is stationary.
The player is compatible with the following formats: DVD-R, DVD+R, DVD+RW, CD-R, CD-RW, VCD and SVCD.
Using the AUX1 and AUX2 inputs, this pack permits the connection of auxiliary systems (camcorder, games console, etc.).
The audio equipment only plays audio fi les with the extension ".mp3" with a sampling rate of 32 KHz to 48 KHz.
All of the functions of the video pack are described in the separate manual supplied with your vehicle.
VIDEO PACK
DVD/AUDIO CD/MP3 PLAYER
01 First steps
02 Configuration
03 Basic functions
04 Screen menu map
05 Frequently asked questions p.
p.
p.
p.
p.
324
326
327
329
330
CONTENTS

324
01
12
89
6
3
3
4
1
7
52
FIRST STEPS
MONITORS AND DVD/CD PLAYER INFRA-RED
HEADPHONES
The monitors are located in the tops of the front seats.
The DVD/CD player is located on the centre console.
1. Monitor positioning handles.
2. Folding and pivoting TFT/LCD screen.
3. Infra-red cell.
4. DVD/CD player opening provided for the disc.
5. On/Off.
DVD/CD eject.
6. LED:
On green: player in operation.
Flashing: receiving information or ejecting the disc.
7. AV1 AUDIO input.
8. AV2 AUDIO input.
9. VIDEO input.
1. 2 channel stereo.
2. On/Off.
3. Volume adjustment.
The headphones are supplied with the video pack.
The presence of an object between the infra-red cell on the monitor and the headphones may result in a reduction in the sound quality.
Supply: 2 batteries R03/AAA 1.5 V.

325
99
7788
111110101212
1313
1414
151555
441616
22
111818
171733
66
01 FIRST STEPS
REMOTE CONTROL
1. Power On/Off, Eject.
2. Selection of the source from DVD, audio CD and AUX.
3. Change screen.
4. DVD screen adjustments (brightness, contrast, …).
5. Selection confi rmation.
6. Fast forward/backward.
In the menus: move the cursor left/right, up/down.
7. Volume increase/decrease.
8. Play/Pause.
9. Next chapter.
10. SHIFT: activation of the yellow buttons.
11. Selection of the audio language.
With SHIFT: selection of the subtitle language.
12. Change chapter.
With SHIFT: change title.
13. Previous chapter.
14. Stop play.
15. RETURN:
Short press: return tothe previous menu.
Long press: return to the main menu.
16. Display the main DVD menu.
17. ZOOM: Selection of different image formats.
18. Display/mask the screen.
Numeric keypad
Power: 2 batteries R03/AAA 1.5 V.

326
02
1
2
3
5
4
1
2
3
CONFIGURATION
SETUP MENU
The "Settings" menu appears on the screen: "Video settings", "Languages", "Users", "Default settings".
Select the options using the  and  buttons.
Press the SETUP button.
Press the OK button to confi rm your choice.
The "Video settings" menu appears on the screen: "Brightness", "Contrast", "Colour", "Back-lighting".
Select the "Video settings" menu using the  and  buttons.
Press the SETUP button. The "Settings" menu appears on the screen.
Press the OK button to confi rm your choice.
The setting is saved.
Select the input required using the  and  buttons.
VIDEO SETTINGS

327
31
2
BASIC FUNCTIONS
SETTING UP THE MONITORS
Using the positioning handles, extract the monitor from the casing.
Release the table using the button and tilt it down.
The monitor is not a touch screen.
Do not press directly on the surface of the monitor, this may damage the LCD screen.
Pivot the monitor upwards until it is in contact with the upper part of the seat.
A notch locks it in position.