2010.5 Citroen C4 PICASSO Owner's Manual

255
06
2
4
3
7
5
6
AUDIO/VIDEO
VIDEO MENU
Turn the dial and select the "Video" function.
After connecting the video equipment, press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the "Activate video mode" function to activate/deactivate the video.
Press the dial to confi rm the selection.
Turn the dial and select the "Video parameters" function to set the display format, the brightness, the contrast and the colours.
Videos can only be displayed when stationary.
Pressing the DARK button disconnects display of the video.
You can connect video equipment (camcorder, digital camera, DVD player...) to the three audio/video sockets, located in the glove box.
Pressing the SOURCE button several times in succession permits the selection of an audio source other than that of the vi deo.
Press the dial to confi rm the selection.
Activate video mode
Video parameters

256
07
1
2
1
2
3
INTERNAL TELEPHONE
Install the SIM card in the holder and then insert it in the slot.
Open the holder by pressing the button using the tip of a pen.
Your SIM card must be installed and removed with the NaviDrive audio and telematics system switched off and the ignition off.
To remove the SIM card, repeat step 1.
Confi rm the PIN code by pressing the # button.
Enter the PIN code on the keypad.
When entering your PIN code, tick the "Store PIN" tab to gain access to the telephone without having to enter this code when it is used subsequently.
INSTALLING YOUR SIM CARD
(NOT SUPPLIED) ENTERING THE PIN CODE
PIN code

257
07
1
2
3
4
BLUETOOTH TELEPHONE
CONNECTING A BLUETOOTH
TELEPHONE
Activate the telephone's Bluetooth function.
The last telephone connected is reconnected automatically.
For reasons of safety, the driver should only carry out operations which require prolonged attention when the vehicle is stationary (pairing the Bluetooth mobile telephone to the hands-free kit).
Press the MENU button, select "Telematics", then "Bluetooth functions". Press the dial to confi rm each operation.
To fi nd and change the name of the CITROËN audio/telephone, repeat step 2 then select "Change the name of the audio/telephone".
Select "Bluetooth activation mode", then "Activated and visible". Press the dial to confi rm each operation.
On your telephone, select the name of the CITROËN audio/telephone. Enter the On your telephone, select the name of On your telephone, select the name of
authentication code (0000 by default).
The services offered by the telephone depend on the netw ork, the SIM card and the compatibility of the Bluetooth equipment used. Refer to your telephone's manual and your operator to check which services you ha ve access to. A list of mobile telephones which offer the best range of services is available from dealers.

258
07 BLUETOOTH TELEPHONE
CONNECTING A BLUETOOTH
TELEPHONE
To change the telephone connected, repeat step 2 then select "List of matched peripheral equipment" and press OK to confi rm. The list of previously connected telephones (10 maximum) appears. Select the telephone of your choice, confi rm, then select "Conn ect" and press the dial to confi rm.
To change the authentication code, repeat step 2 then select "Authentication code" and save the code of your choice.
The call list consists of calls made from the vehicle's telephone only.
Once the telephone has been connected, the system can synchronise the address book and the call list. Repeat step 2 then select "Phone book synchronisation mode". Select the synchronisation of your choice and press the dial to confi rm.
The synchronisation may take a few minutes.

259
07
1
2
4
3
6
5
USING THE TELEPHONE
CALLING A CONTACT
Select "Call list" or "Phone book" and press "OK". Select the number required and confi rm to make the call.
Press the PICK UP button to display the telephone short-cut menu.
Dial the telephone number of your contact using the alphanumeric keypad.
Press the dial to confi rm the selection.
Press the HANG UP button to end the call.
Press the PICK UP button to call the number dialled.
Press the HANG UP button to reject a call.
Press the PICK UP button to accept a call.
ACCEPTING OR REJECTING A CALL Turn the dial and select the "Dial" function.
Dial
To select the telephone used, press MENU, then select "Telematics", then "Bluetooth functions", then "Bluetooth activation mode". Then select:
- "Deactivated": to use the internal telephone,
- "Activated and visible": to use the Bluetooth telephone, visible to all telephones,
- "Activated and not visible": to use the Bluetooth telephone, not visible to other telephones, it is not possible to match a new telephone.
You can also press and hold the steering mounted TEL button to access the telephone menu: calls list, phone book, voice mailbox.

260
08 TRIP COMPUTER
- The "vehicle" tab: range, current fuel consumption and the distance remaining to the destination or the Stop & Start time counter.
- Tab "1" (trip 1) with: the average speed, the average fuel consumption and the distance travelled calculated over trip "1".
- Tab "2" (trip 2) with the same functions for a second trip.
A FEW DEFINITIONS
Range: displays the distance which can travelled with the remaining fuel detected in the tank, basd on the average consumption over th e last few miles (kilometres). This displayed value may vary signifi cantly following a change in the vehicle speed or the relief of the route. When the range falls below 20 miles (30 km), dashes are displa yed. After fi lling with at least 10 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km). If, whilst driving, dashes are displayed continuously in place of the digits, contact a CITROËN dealer. If, whilst driving, dashes are displayed continuously in place of the digits, If, whilst driving, dashes are displayed continuously in place of the digits,
Current fuel consumption: only calculated and displayed above 20 mph (30 km/h).
Average fuel consumption: this is the average fuel consumption since the last trip computer zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value.
Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on).
On-board computer
Instantaneous info.
Range miles
mph
l/100
460
6.519
Stop & Start time counter (minutes/seconds or hours/minutes) If your vehicle is fi tted with Stop & Start, a time counter cal culates the time spent in STOP mode during a journey. It resets to zero every time the ignition is switched on with t he key.

261
08 TRIP COMPUTER
CONTROL SHORT-CUTS
Each press of the button displays the different trip computer data in succession, depending on the screen.
Zero reset
When the required trip is displayed, press the control for more than two seconds.
VEHICLE DIAGNOSTICS
On-board computer
Route
Distance miles
534
miles
l/100
VEHICLE DIAGNOSTICS
STATUS OF FUNCTIONS
RESET TYRE PRESS. DETECT. SYS.
ALERT LOG
1
2
2
2

262
09
1
2
3
4
5
6
7
8
CONFIGURATION
SETTING THE DATE AND TIME
Turn the dial and select the "Confi guration" function.
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the "Display confi guration" function.
Press the dial to confi rm the selection.
Turn the dial and select the "Set date and time" function.
Adjust the settings one by one confi rming by pressing the dial. Next select the "OK" tab on the screen then confi rm.
Press the dial to confi rm the selection.
The "Confi guration" function gives access to the colour, brightness and units settings and to voice commands.
Display confi gurationOK
Set date and time
This adjustment must be carried out whenever the battery has been disconnected.