2009 SUBARU TRIBECA torque

AB-22
Side Airbag Sensor
AIRBAG SYSTEM
9. Side Airbag Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the center pillar lower trim. 44, CENTER PILLAR LOWER TRIM, REMOVAL,
Side Trim.>
4) Remove the seat belt retractor of the front outer
seat belt. SEMBLY, REMOVAL, Front Seat Belt.>
5) Remove the nut and disconnect the airbag con-
nector to remove side airbag sensor.
B: INSTALLATION
CAUTION:
•Do not reuse the bolt and nut.
•Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque:
8 N·m (0.82 kgf-m, 5.9 ft-lb)
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
•Mounting bracket or connector of side airbag
sensor is damaged.
•Side airbag is deployed.
AB-00634

AB-23
Curtain Airbag Sensor
AIRBAG SYSTEM
10.Curtain Airbag Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the rear quarter lower trim. 45, REMOVAL, Rear Quarter Trim.>
4) Remove the nut and disconnect the airbag con-
nector to remove the curtain airbag sensor.
B: INSTALLATION
CAUTION:
•Do not reuse the bolt and nut.
•Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque:
8 N·m (0.82 kgf-m, 5.9 ft-lb)
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
•Mounting bracket or connector of curtain airbag
sensor is damaged.
•Curtain airbag is deployed.
AB-00727

AB-25
Front Sub Sensor
AIRBAG SYSTEM
12.Front Sub Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the front bumper face. FRONT BUMPER FACE, REMOVAL, Front
Bumper.>
4) Remove the bolt, and then detach the front sub
sensor.
5) Disconnect the connector from front sub sensor.
B: INSTALLATION
CAUTION:
•Do not reuse the bolt and nut.
•Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque:
13 N·m (1.32 kgf-m, 9.6 ft-lb)
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
•Front sub sensor, mounting bracket and connec-
tor are damaged.
•Airbag is deployed.
AB-00636

EB-7
General Description
EXTERIOR BODY PANELS
B: COMPONENT
1. FRONT HOOD
(1) Front hood panel (6) Front hood release handle ASSYTightening torque: N·m (kgf-m, ft-lb)
(2) Front hood insulator (7) Front grille weatherstripT1: 7.5 (0.76, 5.5)
(3) Front hood hinge T2: 20 (2.04, 14.5)
(4) Front hood damper T3: 24.5 (2.5, 18.1)
(5) Front hood weather strip T4: 33 (3.4, 24.5)
EB-00273
T3
T1
T3
T2
(2)
(3)
(4)
(5)
(1)
T4
(6)
(7)

EB-8
General Description
EXTERIOR BODY PANELS
2. FRONT FENDER PANEL
Tightening torque: N·m (kgf-m, ft-lb)
T: 7.4 (0.75, 5.5)
EB-00274
T
T
T
T

EB-9
General Description
EXTERIOR BODY PANELS
3. FRONT DOOR PANEL
(1) Front door panel (6) Lower hingeTightening torque: N·m (kgf-m, ft-lb)
(2) Sealing cover T1: 7.4 (0.75, 5.5)
(3) Front door weather strip T2: 24.5 (2.5, 18.1)
(4) Checker T3: 29.4 (3.0, 21.7)
(5) Upper hinge T4: 32.3 (3.3, 23.8)
EB-00289
T4
T1
T3
T2
T3
T2
(6)
(2)
(5)
(1)
(3)
(4)

EB-10
General Description
EXTERIOR BODY PANELS
4. REAR DOOR PANEL
(1) Rear door panel (6) Lower hingeTightening torque: N·m (kgf-m, ft-lb)
(2) Sealing cover T1: 7.4 (0.75, 5.5)
(3) Rear door weather strip T2: 24.5 (2.5, 18.1)
(4) Checker T3: 29.4 (3.0, 21.7)
(5) Upper hinge T4: 32.3 (3.3, 23.8)
EB-00290
T1
T3
T2
(5)
(1)
T3
T2(6)
T4
(4)
(2)
(3)

EB-11
General Description
EXTERIOR BODY PANELS
5. REAR GATE PANEL
C: CAUTION
•Exterior body panels are heavy. Do not drop and
damage the panels. During removal and installa-
tion, do not damage the panel painting surface.
•While removing mounting bolts, using assistance
devices such as a support jack will help support the
panel.
•Be careful not to lose small parts.
(1) Rear gate damper stay Tightening torque: N·m (kgf-m, ft-lb)
(2) Hinge T1: 10 (1.02, 7.2)
(3) Rear gate panel T2: 20 (2.04, 14.5)
T3: 25 (2.6, 18.4)
EB-00277
(3)
T3
T3
T1
T2
(2)
(1)