2009 FIAT DOBLO instrument panel

5
The hands-free function allows the fol-
lowing operations to be performed:
❒Calling someone in your phone-
book using voice commands– you
can call someone from your mobile
phone contacts by using your voice.
You can also call someone in your
phonebook by selecting from those that
appear on the multifunction display of
the control panel.
(This function requires your phonebook
to be copied onto the vehicle's hands-free
system).
❒Calling a phone number using voice
commands– you can dial a phone
number by saying the digits.
❒Calling the sender of an SMS
message– you can directly call the
phone number of the sender of the
last message received, or of a message
already received and saved in the
Blue&Me™inbox.
❒Accepting a call– you can accept an
incoming call by pressing the
ß/MENU
button on the steering wheel.
❒Teleconferencing – you can make
a conference call to a third person
whilst already on another call (with
Bluetooth
®phones connected that
support this functionality)
❒Call alert– while you are involved in
a telephone conversation, you can re-
ceive notice of another incoming call,
answer the incoming call and switch
from one call to the other. (The call
alert is only supported by some of the
compatible mobile phones).
After having registered a mobile phone on
the Blue&Me™system, you can, if your
phone is in the vehicle, make calls by us-
ing voice commands or the steering wheel
controls. When using the hands-free sys-
tem, the telephone conversation is broad-
cast over the vehicle's speakers.SMS MESSAGE READER
(only with compatible
mobile phones)
By means of voice synthesis technology, the
Blue&Me™integrated SMS message
reader automatically reads incoming text
messages on your mobile phone with
Bluetooth
®technology over the vehicle's
sound system and it also interprets any ab-
breviations and emoticons in the message.
The SMS message reader functions are
managed using the steering wheel controls
or Blue&Me™voice commands.
The Blue&Me™SMS message reader al-
lows you to:
❒Be informed, by means of an alert on
the instrument panel multifunction dis-
play, of a new incoming text message on
your mobile phone with Bluetooth
®,
showing the number/name of the
sender. Blue&Me™will also suggest
reading the message to you
❒Manage your text message inbox on
a mobile phone connected to Blue&Me™
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 5

11
GETTING TO KNOW
THE VOICE COMMANDS
When talking to the system, you can al-
ways use the voice command “Help” to
obtain detailed instructions on the voice
commands available for each interactive
stage.
To practise the “Help” command, pro-
ceed as follows:
❒Press the steering wheel control ‘.
❒After Blue&Me™beeps to indicate
that voice recognition is on, say
“Help”. Blue&Me™will give the list
of voice commands available.
❒At the end of the help message, say
“Settings” and, at the end of the mes-
sage, “Help”. Blue&Me™will repeat
the list of voice commands available for
the SETTINGSmenu.
❒You can then say one of the available
commands and proceed with the dia-
logue as you wish.
❒If you need more help, press ‘and say
“Help”.REGISTERING YOUR MOBILE
PHONE
IMPORTANT This operation should on-
ly be carried out with the car stationary.
To register your mobile phone, proceed
as follows:
❒Press ‘and say “Settings” and then,
at the end of the message provided by
Blue&Me™, say “Register User”.
❒The system shows the code number
(PIN) on the instrument panel multi-
function display to be used for registra-
tion. For the next two stages, consult
the chapters in your mobile phone man-
ual on registration and connecting via
Bluetooth
®technology.
❒Find the devices on your mobile phone
with Bluetooth®technology (the set-
ting on your mobile phone could be
called Searchor New Device, for exam-
ple). Find “Blue&Me” in this list (the
name that identifies the Blue&Me™
system in your vehicle) and select it.
❒When prompted, enter the PIN dis-
played on the instrument panel using
your mobile phone keypad. If the reg-
istration is successful, the system will
say “Connection in progress” and at
the end will show on the display, as
confirmation, details of the mobile
phone registered.
It is important to wait for this confirma-
tion message – if you press
ß/MENUor
&/ESCbefore it appears, you risk can-
celling the registration process. If the reg-
istration fails, an error message will ap-
pear; in this case, you will need to repeat
the procedure.
❒After registering your mobile phone,
Blue&Me™will say “Welcome” the
first time you connect. You will not
hear this when registering or connect-
ing the same phone in the future.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 11

17
DISPLAY
The various options in the Main Menu of
Blue&Me™are displayed on the multi-
function instrument panel display and the
sound system (see fig. 1).
Different types of information are dis-
played:
❒Status of the mobile phone connected
via Bluetooth®technology:
❒;indicates that Blue&Me™is connect-
ed to a mobile phone with Bluetooth®.
❒NO BLUETOOTH– indicates that
the connection with the mobile phone
is broken (versions with multifunction
display)
❒Name of your mobile phone network
provider (if not available, “- - - - -” is
displayed).
❒Information relating to the receipt of an
SMS message, the phone number or the
name (if stored in the phonebook) of the
sender of the message.
❒Information relating to the audio track
that is being played via the Media Player.
❒Information relating to the active
Blue&Me™function or the selected
menu option.
❒The sound system display will show in-
formation relating to the audio track be-
ing played via the Media Player.AUDIO
Blue&Me™audio (hands-free, Media Play-
er, vocal announcements, audible signals)
is played over your vehicle's sound system.
For this reason, any sound system audio is
suspended for as long as is necessary.
The audio volume can always be adjusted
by using the sound system controls or the
steering wheel controls.
The sound system display shows specific
messages to notify you that the sound sys-
tem is being used by Blue&Me™.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 17

36
The SETTINGSmenu gives you the fol-
lowing choices:
❒Register a mobile phone
❒Manage user data
❒Advanced options.
To operate within the Settingsmenu
when the car is stationary, you can use
either the steering wheel controls or voi-
ce commands. When the car is moving,
you can use only voice commands. In-
structions for both methods follow.

IF YOU HAVE SOME DIFFICULTIES
USING THE BLUE&ME™ settings func-
tions, see the TROUBLESHOOTING
section.REGISTERING A MOBILE PHONE
In order to use your mobile phone with
the vehicle's hands-free function, it must
be registered.
During the registration process, the
hands-free system searches for a phone
with Bluetooth
®technology in its re-
ception range. If it finds one, it establish-
es a connection with it by using a Person-
al Identification Number (PIN). After you
have registered your mobile phone on the
system, you can use it with the hands-free
system.
IMPORTANT The PIN code used for reg-
istering a mobile phone is produced ran-
domly by the system each time a new
phone is registered, therefore you do not
need to remember it. If you lose it, you
can still use the hands-free system.
You only need to register your phone
once; after that, Blue&Me™will auto-
matically connect to it every time you get
in the vehicle and turn the ignition key to
MAR.You can register your mobile phone by
choosing REGISTRATIONin the SET-
TINGSmenu.
?
To perform the registration manu-
ally, proceed as follows:
Activate the Main Menu by pressing
ß/MENUand select SETTINGS
by pressing SRC/OKor
ß/MENU.
Select REGISTRATIONand then
press SRC/OKor
ß/MENU. The
system begins the registration
process.
The system displays the PIN code
necessary for registering the mobile
phone on the instrument panel and
repeats it out loud. It is important
to know that this PIN is only used
for registering the mobile phone; it
is not your SIM card PIN.
For the next two stages, consult your
mobile phone manual on how to reg-
ister and connect with Bluetooth
®
devices.
SETTINGS
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 36

37
On your mobile phone, look for the
option that finds in-range Blue-
tooth
®devices (it may be called
Find, Add Device, etc.). From the list
of available Bluetooth
®devices,
choose “Blue&Me” (the name that
identifies the Blue&Me™system
on your vehicle).
When prompted by your phone, en-
ter the PIN number shown on the
instrument panel display. If the reg-
istration was successful, the system
will say “Connection in progress”
and you get confirmation at the end
when the display shows details of the
mobile phone registered.
It is important to wait for this con-
firmation message – if you press
ß/MENUor &/ESCbefore it ap-
pears, you risk cancelling the regis-
tration process. If registration fails,
an error message will appear; in this
case, you will need to start again.The first time a mobile phone is reg-
istered, the system says “Wel-
come” as soon as it is connected.
This welcome message will not be
delivered during subsequent regis-
trations or connections of the same
mobile phone.
The system will ask you if you want
to copy across the contacts of the
phone you have just registered.
Copying the phonebook is recom-
mended.
To copy the contacts, press SRC/
OKor
ß/MENU. If you do not
want to copy the phonebook, press
&/ESC. If you do not copy the
phonebook at this point, you can
copy it later by choosing SET-
TINGS, USER DATA, CON-
TACTS.
On some mobile phones, the names
in the phonebook are not copied
automatically, but have to be trans-
ferred by using the mobile phone
keypad. If prompted by the system,
carry out this procedure following
the specific instructions for your
mobile phone and press
ß/MENU
when you have finished.
}
Or, with voice interaction:
Press
‘and say “Settings” and
then, at the end of the message from
the system, say “Register user”.
The system displays the PIN code
for registration on the instrument
panel and repeats it out loud.
For the next two stages, consult
your mobile phone manual on how
to register and connect with Blue-
tooth
®devices.
On your mobile phone, look for the
option that finds in-range Blue-
tooth
®devices (it may be called
Find, Add Device, etc.). From the list
of available Bluetooth
®devices,
choose “Blue&Me” (name that
identifies your vehicle's hands-free
system).
When prompted by your mobile
phone, enter the PIN code shown
on the display with your mobile
phone keypad. If the registration
was successful, the system will say
“Connection in progress” and
you get confirmation at the end
when the display shows details of
the mobile phone registered.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 37

45
USB STORAGE DEVICES
The Media Player is compatible with most
USB 1.0, 1.1 or 2.0 mass storage devices.
MANAGING AUDIO FILES FROM
iPod DEVICES
To optimise the connection of your iPod
with Blue&Me™, you should carry out a
few simple operations on your iPod:
❒configure the iPod for use as an external
disc, referring to the iPod user manual;
❒if the configuration has been made on
an Apple computer, configure it in
Windows;
❒save the music tracks as audio files
compatible with Blue&Me™.
These operations do not compro-
mise the sound quality or usability of
iPod tracks.What I can do
❒Listen to tracks in digital quality
❒Select tracks (by artist, album, genre,
etc.) through voice control or by us-
ing the steering wheel controls
❒Display information about the track be-
ing played (song title, singer, etc.) on the
instrument panel.
❒Recharge the iPod through the USB
port.
What I cannot do
❒Play audio tracks from iPod devices not
configurable as external disks or
iPhones (without Blue&Me™Media
Player adapter, see Note below).
N.B.
A Blue&Me™ Media Player adapter is
available from Lineaccessori Fiat, allow-
ing you to play music tracks from iPod or
iPhone models that cannot be configured
as an external disk.N.B.
USB devices with a password function are
not recommended. If your USB device has
such a function, always check that it has
been deactivated.
The Media Player has only one multime-
dia library. When a new USB device is in-
serted, Blue&Me™creates a new library
to replace the existing one.
COMPATIBLE USB STORAGE DEVICES
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 45

51
TABLE OF SMS MESSAGE READER VOICE COMMANDS
Reads the last message received
Activates the
SMS MESSAGE READER menuReads the last message received
Accesses the messages inbox;
the system will display the first
message in the inbox
Deletes all messages
in the inbox;
the system will ask for confirmation for
the deletion
Activate the function
Notification settings
• Read last
• Read last message
• Read message
• Read last SMS
• Read SMS
• Read last SMS
• Read SMS
• Received messages
• Received
• Delete all
• Delete messages
• Delete
• Notification type
• Notification
• Read last
• Read last message
• Read message
• Read last SMS
• Read SMS
• Read last SMS
• Read SMS
• Message reader
• Messages
• SMS reader
• SMS
• SMS reader
• Messages
• Read
• Re-read
• Read
• Re-read
• Call
• Call
• Delete
• Delete
• Delete message
• Delete message
• Reader off
• Reader off
• Deactivate reader
• Switch off reader
• Deactivate reader
• Forward
• Next
• Next
• Next
• Visual and audible
notification
• Visual and audible
• Visual plus audible
• Audible
• Back
• Previous
• Only visual notification
• Only visual
• Visual
Reads the selected message
from the inbox
Calls the number relating
to the selected message
Deletes
the selected
message
Goes to the next message
Goes to the previous message
Deactivates the SMS message reader;
when a new SMS message arrives, nothing
will be signalled or forwarded to the
system
Signals both visually, using the
display on the instrument panel,
and audibly, through a beep,
the arrival of a new SMS message
Signals only visually, using the display
on the instrument panel, the arrival
of a new SMS message
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:56 Pagina 51

59
Problem Probable cause Possible solution
The display shows:
REGISTRATION FAILED
Or the system says
“Registration failed. Please try again.”
The display shows:
PRIVATE NUMBER
The display shows:
ONLY WHEN STATIONARY
Or the system says:
“This function is only active
with the vehicle stationary”
Repeat the registration process. When
you enter the PIN, check that the PIN
number you enter on your mobile is the
same as that shown on the instrument
panel multifunction display

SETTINGS – MOBILE PHONE
REGISTRATION
Enter in your mobile's phonebook
a name that corresponds to the number
of the incoming calland then download
the phonebook/contact to the
hands-free system againIn this case,
there is nothing that can be done and
the message will always appear
Stop the vehicle and try to activate
the function manually or keep driving
and perform the function by using
the voice recognition system After three minutes from when the system
provides the PIN code needed toregister
the mobile phone, you will no longer
be able to enter the code
❒The caller is not recognised
as a name stored in the phonebook
and the mobile phone registered
does not have caller ID
❒The caller has withheld their ID to
stop you seeing their name and/or
number
Even just glancing occasionally at the
panel can be dangerous and distract
your attention away from the road.
Some Blue&Me™functions require
the user to pay attention to the panel
display and are available only when
the car is stationary
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:56 Pagina 59