2008 RENAULT SCENIC Gas Injection LPG 3000 Workshop Manual

17C-105
MR-372-J84-17C000$944.mif
V2
GAS INJECTION
Fault finding - Fault finding chart (ALP)
LPG 3000
Program No: AB
Vdiag No: 08/10
17C
ALP 4 Idle speed faults
IMPORTANT
For any operation on a component of the LPG supply circuit, consult the safety instructions (see 17D,
LPG injection, Introduction, Safety instructions for all operations).
NOTESCheck that there is no fault in petrol mode.
Check that there is LPG in the tank.
Check that hoses are not blocked or pinched (especially after removal operations).
Repair the faulty component or components.
Check the condition of the air filter.
Replace the air filter if necessary.
Check the expansion valve cooling circuit (see MR 364 Mechanical, 17D, LPG injection, Expansion valve).
Repair the circuit if necessary.
Check the conformity of the spark plugs.
Replace the filter if necessary.
Test the operation of the injectors.
Run and interpret commands AC018 Cylinder 4 injector, AC019 Cylinder 3 injector, AC020 Cylinder 2
injector and AC021 Cylinder 1 injector.
AFTER REPAIRCheck using the diagnostic tool.
GAZ3000_V08_ALP4 / GAZ3000_V10_ALP4

17C-106
MR-372-J84-17C000$944.mif
V2
GAS INJECTION
Fault finding - Fault finding chart (ALP)
LPG 3000
Program No: AB
Vdiag No: 08/10
17C
ALP 5 Faults occurring while driving
IMPORTANT
When carrying out an operation on an LPG supply circuit component, consult the safety instructions
(see 17D, Gas injection, Introduction, Safety instructions for all operations).
NOTESCheck that there is no fault in petrol mode.
Check that hoses are not blocked or pinched (especially after removal operations).
Repair the faulty component or components.
Check the condition of the air filter.
Replace the air filter if necessary.
Check the expansion valve cooling circuit (see MR 364 Mechanical, 17D, LPG injection, Expansion valve).
Repair the circuit if necessary.
Check the conformity of the spark plugs.
Replace the filter if necessary.
Test the operation of the injectors.
Run and interpret commands AC018 Cylinder 4 injector, AC019 Cylinder 3 injector, AC020 Cylinder 2
injector and AC021 Cylinder 1 injector.
AFTER REPAIRCheck using the diagnostic tool.
GAZ3000_V08_ALP5 / GAZ3000_V10_ALP5

17C-107
MR-372-J84-17C000$944.mif
V2
GAS INJECTION
Fault finding - Fault finding chart (ALP)
LPG 3000
Program No: AB
Vdiag No: 08/10
17C
ALP 6 LPG leak
IMPORTANT
For any operation on a component of the LPG supply circuit, consult the safety instructions (see 17D,
LPG injection, Introduction, Safety instructions for all operations).
NOTESNone.
Open the plastic cover on the filler neck.
Check that the filler neck is in good condition.
Change the filler spigot if necessary.
Check that there are no leaks along the pipe that runs from the filler spigot to the LPG tank.
(Fill up with LPG to carry out this operation).
Repair the pipe if necessary.
AFTER REPAIRCheck using the diagnostic tool.
GAZ3000_V08_ALP6 / GAZ3000_V10_ALP6