2008 MITSUBISHI COLT Owner's Manual (in English)

Maintenance8-67
8
Licence plate lampsE01004600116
1. Remove the lamp assemblies by levering them out with astraight blade (or minus) screwdriver. 2. Remove the socket and bulb assembly together by turning
it anticlockwise, and then remo ve the bulb by pulling out.

8-68 Maintenance
8
NOTE●When installing the lamp, insert tab (A) first, then align
and insert tab (B).Room lamps & map lampsE01004700104
Insert a straight blade (or minus) screwdriver into the notch of
the lens and pry gently to remove the lens.
Turn the lamp bulb anticlockwise to remove it from the lamp
bulb holder.
NOTE●Wrap a piece of cloth around th e tip of the screwdriver in
order to avoid scratching the lens.

Maintenance8-69
8
Luggage compartment lampE01005300165
Insert a straight blade (or minus) screwdriver into the notch of
the lens and pry gently to remove the lens.
Remove the bulb from the lamp bulb holder.
NOTE●Wrap a piece of cloth around th e tip of the screwdriver in
order to avoid scratching the lens.
3-door models
5-door models

9
Specifications
Vehicle labeling . . . . . . . . . . . . . . . . . . . . . . . . . . .9- 2
Vehicle dimensions . . . . . . . . . . . . . . . . . . . . . . . .9- 6
Vehicle performance . . . . . . . . . . . . . . . . . . . . . . .9- 8
Vehicle weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .9- 9
Engine specifications . . . . . . . . . . . . . . . . . . . . . . .9- 12
Transmission specifications . . . . . . . . . . . . . . . . . .9- 13
Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . .9- 14
Tyres and wheels . . . . . . . . . . . . . . . . . . . . . . . . . .9- 15
Other specifications . . . . . . . . . . . . . . . . . . . . . . . .9- 16
Fuel consumption . . . . . . . . . . . . . . . . . . . . . . . . . .9- 17
Notes regarding diesel fuel . . . . . . . . . . . . . . . . . .9- 20
Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9- 21

9-2 Specifications
9Vehicle labeling
E01100101599
Vehicle identification number: (VIN)
The vehicle identification number: (VIN) is stamped as shown
in the illustration.
Vehicle information code plate
The vehicle information code plate is riveted as shown in the
illustration.
3-door models
5-door models

Specifications9-3
9
The plate shows model code, engine model, transmission
model and body colour code, etc.
Please use this number when ordering replacement parts.Vehicle identification number plate
(RHD vehicles only)
This is stamped on the number plate riveted to the left front
corner of the instrument panel pad. It is visible from outside the
vehicle through the windscreen.
1- Model code
2- Engine model code,
Exterior code
3- Transmission model code
4- Approval number
5- Chassis number
6- Maximum gross vehicle weight
7- Body colour code, Interior code,
Option code
8- Gross combination weight
9- Maximum axle weight (Front)
10- Maximum axle weight (Rear)

9-4 Specifications
9
Engine number
The engine number is stamped on the engine cylinder block as
shown in the illustration.
Petrol-powered vehicles
1100 models
*: Front of the vehicle
1300 models, 1500 models (Except for vehicles with
turbocharger)
1500 models (Vehicles with turbocharger)