Page 25 of 450

General information5
4. To fill with fuel correctly mainly depends on correct han-dling of the fuel filler gun. Do not tilt the gun. Insert the
gun in the tank port as far as it will go.
5. When the gun stops automatically, withdraw it halfway in the tank port. After the second automatic stop, do not fill
with any more fuel.
6. To close, turn the fuel tank filler tube cap slowly clock-
wise until you hear a clicking sound, then gently push the
fuel tank filler door closed.Installation of accessories
E00200300413
We recommend you to consult your MITSUBISHI MOTORS
Authorized Service Point.
● The installation of accessories, optional parts, should only
be carried out within the limits prescribed by law in your
country, and in accordance wi th the guidelines fitting
instructions and warnings contained within the documents
accompanying the parts or accessories.
● Improper installation of electrical components may cause
an electrical fire if incorrect ly fitted. Please refer to the
“Modification/alterations to th e electrical or fuel systems”
section within this owner’s manual.
● Using a cellular phone or radio set inside the vehicle with-
out an external antenna may cause electrical system inter-
ference, which could lead to unsafe vehicle operation.
● Tyres and wheels which do no t meet specifications must
not be used.
Refer to the “Specifications ” section for information
regarding wheel and tyre sizes.
CAUTION!
● A label which reads “UNLEADED FUEL ONLY” is
attached to the fuel tank f iller lid of vehicles which
can only operate on unlead ed petrol. Serious engine
and catalytic converter damage will result if leaded
petrol is put into these ve hicles, and this must conse-
quently never be attempted.
CAUTION!
● To avoid fuel spillage and overfilling, do not “top-
off” the fuel tank.
CAUTION!
●If you need to replace the fuel tank filler tube cap,
use only the cap specified for your vehicle model.
Page 26 of 450

6 General information
Important points!
Due to large number of accessory and replacement parts of dif-
ferent manufactures available in the market, it is not possible,
not only for MITSUBISHI MOTO RS, but also a MITSUBISHI
MOTORS Authorized Service Po int, to check whether the
attachment or installation of such parts affects the overall
safety of your MITSUBISHI-vehicle.
Even when such parts are offici ally authorized, for example by
a “general operators permit” (an appraisal for the part) or
through the execution of the part in an officially approved man-
ner of construction, or when a single operation permit follow-
ing the attachment or installatio n of such parts, it cannot be
deduced from that alone, that the driving safety of your vehi-
cles has not been affected.
Consider also that there basically exists no liability on the part
of the appraiser or the official. Only in case of parts
(MITSUBISHI MOTORS origin al replacement or exchange
parts as well as MITSUBISHI MOTORS genuine accessories)
that are recommended and released by a MITSUBISHI
MOTORS Authorized Service Po int and that are attached or
installed by a MITSUBISHI MOTORS Authorized Service
Point you can assume that optimal safety has been provided.
The same also pertains to modi fications of MITSUBISHI vehi-
cle with respect to the produc tion specifications. For your own
safety, in such cases, you should only undertake modifications
according to the recommen dations of a MITSUBISHI
MOTORS Authorized Service Point.
Modification/alterations to the electrical or
fuel systems
E00200400267
MITSUBISHI MOTORS has always manufactured safe, high
quality vehicles. In order to maintain this safety and quality, it
is important that any accessory that is to be fitted, or any modi-
fications carried out which invo lve the electrical or fuel sys-
tems, should be carried out in accordance with MITSUBISHI
MOTORS guidelines.
CAUTION!
● If the wiring interferes wi th any part of the vehicle
bodywork or improper installation methods are
used, i.e. protective fuses not installed, etc.), elec-
tronic devices may be ad versely affected, possibly
resulting in an electrical fire or other failures that
may cause an accident.
Page 27 of 450

General information7
Genuine parts
E00200500486
MITSUBISHI MOTORS has gone to great lengths to bring you
a superbly crafted automobile offering the highest quality and
dependability.
Use MITSUBISHI MOTORS Genuine Parts, designed and
manufactured to maintain your MITSUBISHI MOTORS auto-
mobile at top performance. MITSUBISHI MOTORS Genuine
Parts are identified by this mark and are available at all
MITSUBISHI MOTORS Auth orized Service Points.
Used engine oils safety instructions and
disposal information
E00200600025
Protect the environment
It is illegal to pollute drains, water courses and soil. Use
authorized waste collection faci lities, including civic amenity
sites and garages providing facilities for disposal of used oil
and used oil filters. If in doubt, contact your local authority for
advice on disposal.
WARNING!
● Prolonged and repeated contact may cause serious
skin disorders, including dermatitis and cancer.
●Avoid contact with the skin as far as possible and
wash thoroughly after any contact.
● Keep used engine oils ou t of reach of children.
Page 28 of 450
Page 29 of 450
1
Locking and unlocking
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1- 2
Electronic immobilizer (Anti-theft starting system). . . . . . . . . . . . . . . . .1- 3
Keyless entry system* . . . . . . . . . . . . . . . . . . . . . .1- 5
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1- 7
Central door locks* . . . . . . . . . . . . . . . . . . . . . . . .1- 9
Dead Lock System* . . . . . . . . . . . . . . . . . . . . . . . .1- 10
“Child-protection” rear doors (5-door models) . . .1- 13
Tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1- 14
Manual window control (5-door models, rear door window only)* . . . . .1- 17
Electric window control . . . . . . . . . . . . . . . . . . . . .1- 18
Page 30 of 450

1-2 Locking and unlocking
1Keys
E00300101220
The keys fit all locks.
NOTE●
The key number is stamped on the tag as shown in the
illustration.
Make a record of the key number and store the key and
key number tag in separate places, so that you can order
new keys if the original keys are lost.
● The key is a precision electronic device with a built-in sig-
nal transmitter. Please observe the following in order to
prevent a malfunction.
• Do not leave in any place expo sed to direct sunlight, for
example the dashboard.
• Do not disassemble or modify.
• Do not excessively bend the key or subject it to a strong impact. • Do not expose to water.
• Keep away from magnetic key holders.
• Keep away from audio sy
stems, personal cumputers,
TVs, and any other equipment that generates a magnetic
field.
• Do not wash with ultrasonic cleaners or similar equip-
ment.
• Do not leave the key where it may be exposed to high temperature or high humidity.
● The engine is designed so that it will not start if the ID
code registered in the immobi lizer computer and the key’s
ID code do not match. Refer to the section “Electronic
immobilizer” for details and key usage.
Page 31 of 450
Locking and unlocking1-3
1
Electronic immobilizer
(Anti-theft starting system)
E00300201016
The electronic immobilizer is designed to significantly reduce
vehicle theft. The purpose of th e system is to immobilize the
vehicle if an invalid start is attempted. A valid start attempt can
only be achieved (subject to certain conditions), using a key
“registered” to the immobilizer system.
All the keys supplied with your new vehicle have been pro-
grammed to the vehicle’s electronics. The immobilizer indicator lamp
comes on if there is a malfunc-
tion in the system electronics.
Page 32 of 450
1-4 Locking and unlocking
1
NOTE●In the following cases, the vehicle may not be able to
receive the registered ID co de from the key. This means
that the engine will not start even when the registered key
is turned to the “START” position.
• When the key contacts a key ring or other metallic or magnetic object (Type A)
• When the key grip contacts metal from another key (Type B)
• When the key contacts or is close to other immobilizing
keys (including keys of other vehicles) (Type C)
In such cases, remove the object or additional key from
the vehicle key. Then try to st art the engine again. If the
engine does not start, pl ease contact your MITSUBISHI
MOTORS Authorized Service Point.