2008 Citroen C4 Owner's Manual

34
II
M U L T I F U N C T I O N D I S P L A Y
Main menu
Press control A to display the "Main menu" for the multifunction screen. Using this menu, you have access to the following functions:
Presentation:
1 - Time.
2 - Ambient temperature
3 - Date and Display zone
If the outside temperature is between +3 °C and -3 °C, the temperature display fl ashes (risk of ice).
Note: the outside temperature displayed may be higher than the actual temperature if the vehicle is standing in bright sunlight.
Radio-CD
(See "Radio")
Trip computer
Bluetooth hands-free kit
(See "Radio")
Controls
A - Access to the "Main menu".
B - Scrolling in the display menus.
C - Validation and selection in the menus of the function chosen or the value modifi ed.
D - Cancellation of the operation or return to the previous display.
E - Selection of the type of information you wish to see permanently displayed (date, radio-CD, trip computer) on the right of the screen.
DISPLAY C
It allows:
- Distance to your destination.
- Access to log of alerts (list of the alerts that have been previously signalled).
- Access to status of functions, for example activation/deactivation of automatic lighting of head-lamps, ESP, windscreen wipers.
The driver is advised not to operate the controls when driving.

35
II
M U L T I F U N C T I O N D I S P L A Y
Personalisation Confi guration
It allows you to activate/deactivate:
- Triggering of rear screen wipe.
- Automatic guide-me-home lighting, with choice of duration.
- Driving headlamps.
Also to choose:
- Brightness, the time, the date, units.
- The display language.
To activate/deactivate rear wipe on engaging reverse gear
- Press on A.
- Use B to select the trip computer icon, then confi rm with a press on C.
- Select your entry of distance, using B. Confi rm your choice with a press on C.
- To choose the distance, select the fi gure to be modifi ed, using B, then confi rm with a press on C.
- Use B to adjust the value then validate with a press on C.
- Validate on "OK" on the display.
To activate/deactivate automatic guide-me-home lighting
- Press on A.
- Use B to select the icon "Personalisation-Configuration" then confi rm your choice with a press on C.
- Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on C.
- Using B, select lighting and signalling. Confi rm your choice with a press on C.
- Then with a press on C, select/deselect guide-me-home lighting to activate or deactivate it. After activation, choose the duration: press on C then use B to select the duration and press on C.
- Validate on "OK" on the display.
To activate/deactivate the directional headlamps
- Press on A.
- Use B to select the icon "Personalisation-Configuration" then confi rm your choice with a press on C.
- Then select the sub-menu for vehicle parameters. Confi rm with a press on C.
To adjust the display brightness
- Press on A.
- Use B to select the icon "Personalisation-Configuration" then confi rm your choice with a press on C.
- Select the display confi guration using B. Confi rm with a press on C.
- Select the adjustment of brightness. Confi rm with a press on C.
- Use B to select normal or other display mode, then validate with a press on C. To adjust the brightness, select the symbols "+"or "-" and confi rm your adjustment with a press on C.
- Validate on "OK" on the display.
- Using B, select the driving assistance. Confi rm your choice with a press on C.
- Then with a press on C, select/deselect driving headlamps to activate or deactivate them.
- Validate on "OK" on the display.

36
II
M U L T I F U N C T I O N D I S P L A Y
To choose units
- Press on A.
- Use B to select the icon "Personalisation-Configuration" then confi rm your choice with a press on C.
- Select the display confi guration using B. Confi rm with a press on C.
- Then select the sub-menu for Units. Confi rm with a press on C.
- Using B, select the unit to be modifi ed (Temperature or Consumption) then validate with a press on C.
- Validate on "OK" on the display.
Note: This choice concerns all the types of information (fuel consumption, speed, etc.) that appear on the displays.
To choose the language
- Press on A.
- Use B to select the icon "Personalisation-Configuration" then confi rm your choice with a press on C.
- Select the choice of language, using B.
- Using B, select the desired language and validate your choice with a press on C.
- Validate on "OK" on the display.
To adjust the date and time
- Press on A.
- Use B to select the icon "Personalisation-Configuration" then confi rm your choice with a press on C.
- Select the display confi guration using B. Confi rm with a press on C.
- Select the date and time adjustment, using B, then confi rm with a press on C.
- Use B to select the values to be modifi ed. Confi rm with a press on C.
- Make your adjustments using B, validating each adjustment with a press on C.
- Validate on "OK" on the display.

37
II
M U L T I F U N C T I O N D I S P L A Y
Controls
A - Access to the "Main menu".
B - Scrolling in the display menus.
C - Validation and Selection in the menus, of the function chosen or value modifi ed.
D - Cancellation of the operation or return to the previous display.
E - Selection of the type of information you wish to see permanently displayed (date, radio-CD, trip computer) on the right of the screen.
Presentation:
1 - Ambient temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
If the outside temperature is between +3 °C and -3 °C, the temperature display fl ashes (risk of ice).
Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is standing in bright sunshine.
NAVIDRIVE DISPLAYMain menu
Press control A to display the "Main menu" for the multifunction screen.
This menu gives access to the following functions (See "Navidrive" instructions):
The driver is advised not to operate the controls when driving.
Traffi c information
Vehicle diagnosis
Audio
Confi guration, for adjusting various parameters (date, time, units)
Map
Video
Navigation/guidance
Audio

38
II
M U L T I F U N C T I O N D I S P L A Y
Display A
The trip computer provides 5 types of information, which can be accessed by pressing successively on the end of the control stalk.

39
II
M U L T I F U N C T I O N D I S P L A Y
Display C or NaviDrive (continued)
The journeys
Journeys 1 and 2 are identical but independent of each other. For example, you can use Journey 1 for daily calculations and Journey 2 for monthly calculations.
To reset a journey to zero
When the desired journey is displayed, give a long press on the end of the wiper stalk.
Permanent display
Pressing the "Mode" button causes the trip computer information to be displayed permanently.
Enter the distance to be travelled
- Press A.
- Using B select the trip computer icon, then validate by pressing C.
- Select distance entry, using B. Validate your choice by pressing C.
- To choose the distance, select the fi gure to be modifi ed using B then validate using C.
- Using B, adjust the value then validate using C.
- Validate with "OK" in the display.
To display the log of alerts or status of functions
- Press A.
- Using B select the trip computer icon, then validate by pressing C.
- Select the log of alerts or status of functions.
- Once the list is displayed, scroll through the list using B.
- Press D to return to the permanent display.

40
II
M U L T I F U N C T I O N D I S P L A Y
Display ADisplay C or NaviDrive (continued)RangeThis indicates the mileage that can still be travelled using the fuel remaining in the tank.When the distance remaining to be travelled is less than abo ut 25 km (approx. 15 miles), only three dashes are displayed.After resetting the computer, the indication of remaining range is only reliable after the vehicle has been used for a certain time.
Average fuel consumption
The average fuel consumption is calculated from the last reset of the computer.
Instantaneous fuel consumption
This is calculated from consumption over the previous 2 seconds. This function is only available when travelling at over 30 km/ h (approx. 20 mph).
Average speed
The average speed is obtained, from the last reset of the computer, by dividing the distance covered by the time taken (ignition on).
Distance travelled
It indicates the distance travelled since the trip computer was last reset to zero.
Distance remainingSee previous page.

41
III
C O M F O R T
VENTILATION
Air intake
Make sure that the exterior air inlet grille at the base of the windscreen is clean (free of dead leaves, snow etc.).
If washing the vehicle with a high pressure jet, take care to avoid tar-geting close to the air inlet.
Air vents
The air vents have grilles for direct-ing the fl ow of air (up/down, right/ left) with controls for adjusting the volume of air.
Air circulation
Optimal comfort is obtained by a good distribution of air in the front and the rear of the passenger com-partment.
To ensure effi cient operation, take care not to obstruct the air outlets located under the front seats.
Pollen fi lter/odour fi lter (active carbon)
Your installation has a fi lter for exclud-ing dust and restricting disagreeable odours.
This fi lter needs to be changed accord-ing to the maintenance requirements. (See: Maintenance Guide).