2007 Peugeot 407 Owner's Manual

1010
122
Fuse N°RatingFunctions
F75 AGlove box light, side repeaters, front and rear courtesy lights, map reading lights, courtesy mirror.
F820 ACD changer, multifunction display, audio equipment, steering wheel control, trailer fusebox, alarm control unit, navigation-telematics (according to country).
F930 ALighter, telematics (according to country), rear 12 V accessories socket (100 W max).
F1015 ATyre under-inflation detection unit.
F1115 ADiagnostic socket, ignition switch.
F1230 AHands-free kit, trailer socket, trailer fusebox, audible rear parking assistance, passenger’s electric seat, rain and brightness sensor, alarm.
F135 AEngine fusebox, windscreen wipers relay control.
F1415 ADriver’s seat memory unit or driver’s electric seat, instrument panel, air conditioning control panel, air bags control unit.
F1515 AElectric child lock, rear doors deadlocking.
F1740 AHeated rear screen.
FS1-PARC shunt.

1010
123
Fuse N°RatingFunctions
G295 ATelematics (according to country).
G3030 ADriver’s electric seat without memory unit.
G3130 APassenger’s electric seat without memory unit.
G3215 ARear 12 V accessories socket (100 W max).
G33-Not used.
G34-Not used.
G35-Not used.
G3630 ADriver’s seat memory unit.
G3715 ASix-speed automatic gearbox supply.
G3830 ARight and left heated seats.
G39-Trailer fusebox (accessory).
G4030 AAudio Hi-Fi assembly.

1010
125
The electrical system of your vehicle is designed to operate with standard or optional equip-ment.
Before installing other electrical equip-ment or accessories on your vehicle, contact a PEUGEOT dealer.
PEUGEOT will not accept responsi-bility for the cost incurred in repairing your vehicle or for rectifying the mal-functions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instruc-tions, in particular where the equip-ment in question consumes more than 10 milliamperes.
The maxi-fuses provide additional protection for the electrical systems. All work must be carried out by a PEUGEOT dealer.
CHANGING A WINDSCREEN WIPER BLADEECONOMY MODE FUNCTION
After the engine has stopped, certain functions (audio equipment, wind-screen wiper, electric windows, sun-roof, electric seats, telephone, video, etc) are only supplied with power for approximately thirty minutes, to prevent complete discharging of the battery.
Once the thirty minutes are over, a message appears on the multi-func-tion display and the active functions areput on standby.
These functions are automatically re-activated when the vehicle is started.
A flat battery prevents the en-gine from starting.
As winter approaches, have your bat-tery checked by a PEUGEOT dealer.
If the telephone is being used when economy mode starts, it will still be possible to finish the call.
Placing the wiper blades in the maintenance position
 Less than one minute after switching off the ignition, press the windscreen wiper stalk down once to position the blades at the top of the windscreen (maintenance position).
Replacing a blade
 Lift the arm, then unclip the blade and remove it.
 Fit the new blade and fold down the arm.
To reposition the blades, switch on the ignition and operate the windscreen wiper stalk.

1010
124
Engine compartment fuses
To access the fuses located in the engine compartment (next to the bat-tery), remove the battery cover and unclip the fuse box cover.
Close the fuse box cover carefully and refit the battery cover when you have finished.
Fuse N°RatingFunctions
120 AEngine management control unit.
215 AHorn.
310 AFront and rear wash-wipe.
420 AHeadlamp wash.
515 AEngine management actuators(fuel pump, purge canister solenoid valves, ...).(fuel pump, purge canister solenoid valves, ...).Engine management actuatorsEngine management actuators
610 AAutomatic gearbox control unit.
710 A
Switching and protection unit, intake air flow sensor, clutch switch, six-speed automatic gearbox switch, STOP switches, electrochromatic mirror, panoramic roof concealing flap controls (407 SW).
820 AStarter coil.
910 A
Xenon bulb electronic supply, STOP switch, power steering electropump assembly,four-speed automatic gearbox control unit, automatic gearbox locking relay.automatic gearbox locking relay.
1030 AEngine management actuators (ignition coil, solenoid valves, oxygen sensors).
1140 AAir conditioning blower or not used.
1230 AWindscreen wipers.
1340 ABuilt-in systems interface supply(ignition positive).
1430 AAir pump.

1010
125
The electrical system of your vehicle is designed to operate with standard or optional equip-ment.
Before installing other electrical equip-ment or accessories on your vehicle, contact a PEUGEOT dealer.
PEUGEOT will not accept responsi-bility for the cost incurred in repairing your vehicle or for rectifying the mal-functions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instruc-tions, in particular where the equip-ment in question consumes more than 10 milliamperes.
The maxi-fuses provide additional protection for the electrical systems. All work must be carried out by a PEUGEOT dealer.
CHANGING A WINDSCREEN WIPER BLADEECONOMY MODE FUNCTION
After the engine has stopped, certain functions (audio equipment, wind-screen wiper, electric windows, sun-roof, electric seats, telephone, video, etc) are only supplied with power for approximately thirty minutes, to prevent complete discharging of the battery.
Once the thirty minutes are over, a message appears on the multi-func-tion display and the active functions areput on standby.
These functions are automatically re-activated when the vehicle is started.
A flat battery prevents the en-gine from starting.
As winter approaches, have your bat-tery checked by a PEUGEOT dealer.
If the telephone is being used when economy mode starts, it will still be possible to finish the call.
Placing the wiper blades in the maintenance position
 Less than one minute after switching off the ignition, press the windscreen wiper stalk down once to position the blades at the top of the windscreen (maintenance position).
Replacing a blade
 Lift the arm, then unclip the blade and remove it.
 Fit the new blade and fold down the arm.
To reposition the blades, switch on the ignition and operate the windscreen wiper stalk.

1010
125
The electrical system of your vehicle is designed to operate with standard or optional equip-ment.
Before installing other electrical equip-ment or accessories on your vehicle, contact a PEUGEOT dealer.
PEUGEOT will not accept responsi-bility for the cost incurred in repairing your vehicle or for rectifying the mal-functions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instruc-tions, in particular where the equip-ment in question consumes more than 10 milliamperes.
The maxi-fuses provide additional protection for the electrical systems. All work must be carried out by a PEUGEOT dealer.
CHANGING A WINDSCREEN WIPER BLADEECONOMY MODE FUNCTION
After the engine has stopped, certain functions (audio equipment, wind-screen wiper, electric windows, sun-roof, electric seats, telephone, video, etc) are only supplied with power for approximately thirty minutes, to prevent complete discharging of the battery.
Once the thirty minutes are over, a message appears on the multi-func-tion display and the active functions areput on standby.
These functions are automatically re-activated when the vehicle is started.
A flat battery prevents the en-gine from starting.
As winter approaches, have your bat-tery checked by a PEUGEOT dealer.
If the telephone is being used when economy mode starts, it will still be possible to finish the call.
Placing the wiper blades in the maintenance position
 Less than one minute after switching off the ignition, press the windscreen wiper stalk down once to position the blades at the top of the windscreen (maintenance position).
Replacing a blade
 Lift the arm, then unclip the blade and remove it.
 Fit the new blade and fold down the arm.
To reposition the blades, switch on the ignition and operate the windscreen wiper stalk.

1010
126
To start the vehicle from another battery:
- Connect the red cable to the positive (+) terminals of the two batteries,
- Connect one end of the green or black cable to the negative (-) termi-nal of the slave battery,
- Connect the other end of the green or black cable to an earth point on the broken down vehicle as far as possible from the battery,
- Operate the starter, let the engine run.
- Wait for the engine to return to idle, then disconnect the cables.
BATTERY (LOCATED IN THE
ENGINE COMPARTMENT)
Disconnecting/Reconnecting the cables
- Raise the locking plate A.
- Position the open clip of the cable on the positive (+) terminal of the bat-tery.
- Press until the position checking system B tilts.
- Lock the clip by lowering the locking plate while pressing on the clip.
It is advisable to disconnect the battery if the vehicle is not to be used for a period of more than one month.
To charge the battery using a battery charger:
- Disconnect the battery,
- Follow the instructions for use given by the battery charger manufacturer,
- Reconnect starting with the negative (-) terminal,
- Check that the terminals and con-nectors are clean. If they are cov-ered with sulphate (white or greenish deposit), disconnect them and clean them.
Do not force the plate as lock-ing is not possible if the clip is not positioned correctly.
Start the procedure again.

1010
127
To start the vehicle from another battery:BATTERY
(LOCATED IN THE BOOT)*
* Vehicles fitted with the 2.7 litre HDI 24V engine.
The battery is in the left boot trim.
To charge the battery using a bat-tery charger (boot open):
 fold down the panel to gain access to the battery,
 disconnect the battery,
 follow the instructions for use given by the battery charger manufacturer,
 reconnect starting with the nega-tive (-) terminal,
 raise the panel and close it.
 open the bonnet, use the two additional positive (+) and negative (-) terminals located under the bonnet, open the red cover of the positive (+) terminal, connect the red cable between the positive (+) terminal and the posi-tive (+) terminal of the slave bat-tery, connect the green or black cable between the negative (-) terminal and the negative (-) terminal of the slave battery, operate the starter, let the engine run, wait for the engine to return to idle, then disconnect the cables, close the red cover of the positive (+) terminal, refit the left side cover, close the bonnet.
Before disconnecting the battery, you must wait for 2 minutes after switching off the ignition.
Never disconnect a terminal when the engine is running.
Never charge a battery without first disconnecting the terminals.
Open the windows and close the sun-roof before disconnecting the battery. If they do not operate normally following reconnection of the battery, they must be reinitialised (see sections "Reini-tialisation of the electric windows" and "Sunroof").
After every reconnection of the bat-tery, switch on the ignition and wait 1 minute before starting to allow the electronic systems to be initialised. However, if slight difficulties are ex-perienced after this, please contact a PEUGEOT dealer.
On the 2.7 litre 24V HDI engine, if there is no battery in the boot, do not connect a slave battery to the positive (+) and negative (-) termi-nals under the bonnet as a short circuit may occur.
The batteries contain harmful substances such as sulphu-ric acid and lead. They must be disposed of in accordance with regulations and must never be discarded with household waste.
Take used batteries to an approved collection point.