GENERAL -Precautions Before ServiceGENERAL -Precautions Before Service00-20
MUT-II
Refer to the “MUT-IIREFERENCE MANUAL” or “MUT-II
OPERATING INSTRUCTIONS” for instructions on handling
the MUT-II.
Connect the MUT-IIto the diagnosis connector as shown
in the illustration.
Caution
Turn the ignition switch to the LOCK (OFF) position before
connecting or disconnecting the MUT-II.
IN ORDER TO PREVENT VEHICLES FROM FIRE
“Improper installation of electrical or fuel related parts could cause a fire. In order to retain the high
quality and safety of the vehicle, it is important that any accessories that may be fitted or modifications/repairs
that may be carried out which involve the electrical or fuel systems, MUST be carried out in accordance
with MMC’s information/Instructions”.
ENGINE OILS
Health Warning
Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin,
leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful
contaminants which may cause skin cancer. Adequate means of skin protection and washing facilities
must be provided.
Recommended Precautions
The most effective precaution is to adapt working practices which prevent, as far as practicable, the
risk of skin contact with mineral oils, for example by using enclosed systems for handling used engine
oil and by degreasing components, where practicable, before handling them.
Other precautions:
DAvoid prolonged and repeated contact with oils, particularly used engine oils.
DWear protective clothing, including impervious gloves where practicable.
DAvoid contaminating clothes, particularly underpants, with oil.
DDo not put oily rags in pockets, the use of overalls without pockets will avoid this.
DDo not wear heavily soiled clothing and oil-impregnated foot-wear. Overalls must be cleaned regularly
and kept separately from personal clothing.
DWhere there is a risk of eye contact, eye protection should be worn, for example, chemical goggles
or face shields; in addition an eye wash facility should be provided.
DObtain First Aid treatment immediately for open cuts and wounds.
DWash regularly with soap and water to ensure all oil is removed, especially before meals (skin cleansers
and nail brushes will help). After cleaning, the application of preparations containing lanolin to replace
the natural skin oils is advised.
DDo not use petrol, kerosine, diesel fuel, gas oil, thinners or solvents for cleaning skin.
DUse barrier creams, applying them before each work period, to help the removal of oil from the skin
after work.
DIf skin disorders develop, obtain medical advice without delay.
MUT-II
sub-assembly
ROM pack
MUT- ˜
ENGINE LUBRICATION -General Information12-2
GENERAL INFORMATION
The lubrication method is a fully force-fed, full-flow
filtration type. The oil pump is a gear type which
is driven by the crankshaft via the timing belt.
ENGINE OILS
Health Warning
Prolonged and repeated contact with mineral oil
will result in the removal of natural fats from the
skin, leading to dryness, irritation and dermatitis.
In addition, used engine oil contains potentiallyharmful contaminants which may cause skin cancer.
Adequate means of skin protection and washing
facilities must be provided.
Recommended Precautions
The most effective precaution is to adapt working
practices which prevent, as far as practicable, the
risk of skin contact with mineral oils, for example
by using enclosed systems for handling used engine
oil and by degreasing components, where
practicable, before handling them.
Other precautions:
DAvoid prolonged and repeated contact with oils,
particularly used engine oils.
DWear protective clothing, including impervious
gloves where practicable.
DAvoid contaminating clothes, particularly
underpants, with oil.
DDo not put oily rags in pockets, the use of
overalls without pockets will avoid this.
DDo not wear heavily soiled clothing and
oil - impregnated foot - wear. Overalls must be
cleaned regularly and kept separate from
personal clothing.DWhere there is a risk of eye contact, eye
protection should be worn, for example,
chemical goggles or face shields; in addition
an eye wash facility should be provided.
DObtain First Aid treatment immediately for open
cuts and wounds.
DWash regularly with soap and water to ensure
all oil is removed, especially before meals (skin
cleansers and nail brushes will help). After
cleaning, the application of preparations
containing lanolin to replace the natural skin
oils is advised.
DDo not use petrol, kerosine, diesel fuel, gas
oil, thinners or solvents for cleaning skin.
DUse barrier creams, applying them before each
work period, to help the removal of oil from
the skin after work.
DIf skin disorders develop, obtain medical advice
without delay.
