2007 MITSUBISHI LANCER EVOLUTION trunk

BODY CONSTRUCTION -Body ComponentsA-3
1. Headlamp support panel
2. Hood lock stay
3. Front end crossmember
4. Front end upper bar
5. Headlamp support panel side
6. Front fender shield
7. Front upper frame inner
8. Upper frame bulkhead front
9. Upper frame bulkhead
10. Upper frame bulkhead rear
11. Front sidemember inner
12. Engine mount bracket
13. Front sidemember rear
14. Front sidemember outer
15. Spring house panel
16. Dash panel
17. Dash panel silencer
18. Dash panel reinforcement
19. Upper frame to front pillar brace
20. Upper frame extension outer
21. Upper frame extension inner
22. Cowl top lower panel
23. Cowl top inner panel
24. Cowl top upper panel
25. Front deck crossmember
26. Hood inner panel
27. Hood outer panel
28. Front roof rail
29. Front roof bow
30. Roof panel
31. Rear roof bow
32. Rear roof rail
33. Seat back plate
34. Rear seat back panel
35. Rear shelf panel
36. Rear seat back brace
37. Trunk lid outer panel
38. Trunk lid inner panel
39. Trunk lid hinge
40. Quarter inner extension rear
41. Quarter corner panel42. Rear combination lamp housing
43. Side roof rail inner
44. Front pillar inner upper
45. Front pillar inner lower
46. Center pillar inner
47. Side outer panel
48. Rear wheel house inner panel
49. Quarter inner panel
50. Rear floor side brace
51. Quarter outer extension lower
52. Fuel filler door
53. Rear license plate bracket
54. Rear end panel outer
55. Rear end panel inner
56. Rear door outer panel
57. Rear door side door beam
58. Rear door inner panel
59. Front door outer panel
60. Front door side door beam
61. Front door inner panel
62. Fender panel
63. Front floor crossmember rear
64. Front floor crossmember front
65. Front floor side sill inner
66. Front floor sidemember
67. Backbone reinforcement
68. Installment panel center bracket reinforcement
69. Front floor pan
70. Front floor extension panel rear
71. Rear floor extension
72. Rear floor pan
73. Seat back plate extension
74. Jack bracket
75. Spare tire bracket
76. Towing hook reinforcement
77. Rear floor sidemember extension
78. Crossmember center support
79. Rear floor crossmember
80. Rear floor sidemember
81. Rear seat back reinforcement

BODY CONSTRUCTION -Body Construction CharacteristicsA-15
REAR BODY
Rear Deck
A rear shelf extension has been added to form closed surface structure. Then, the rear shelf and the
rear floor have been joined to improve the torsion rigidity of the seat back plate.
1 2 3 45
6
7
1. Seat back plate
2. Rear seat back panel
3. Rear shelf extension
4. Rear shelf panel5. Rear shelf reinforcement
6. Trunk lid hinge reinforcement
7. Seat belt reinforcement (Europe and General
Export spec. models)
Rear end panel
12
3
4
1. Rear end panel inner
2. Rear end panel outer3. Rear license plate bracket
4. Bumper bracket lower

CORROSION PROTECTION -Body Sealing Locations
910
1112
HoodFront door
Rear doorTrunk lid
D-4

WIRING HARNESS CONFIGURATION DIAGRAMS
Connector
symbol
F
F-01F-04F-05F-06F-08
F-19
F-16
F-28
F-27F-26F-25F-24F-23F-14
F-21
F-09
F-10
F-12
F-13
F-29
B-38
LUGGAGE COMPARTMENT
L.H. drive vehicles
F-01 (2) Spare connector
F-04 (2) Luggage compartment lamp
F-05 (2-B) High mounted stop lamp
F-06 (1-B) Defogger ( - )
F-08 (2) Spare connector
F-09 (6-B) Rear combination lamp (RH)
F-10 (1-B) Trunk lid latch switch
F-12 (2-GR) Licence plate lamp (RH)
F-13 (2-GR) Licence plate lamp (LH)
F-14 (2-GR) Floor wiring harness (LH) and bumper
wiring harness combinationF-16 (6-B) Rear combination lamp (LH)
F-19 (1) Defogger (+)
F-21 (2) Windshield washer motor
F-23 (2-B) Electric pump
F-24 (8-GR) Floor wiring harness (LH) and 4WD wiring
harness combination
F-25 (2-B) Direction valve (LH)
F-26 (2-B) Direction valve (RH)
F-27 (3-B) Proportioning valve (for ACD control)
F-28 (3-B) Proportioning valve (for AYC control)
F-29 (3-B) Pressure sensor

WIRING HARNESS CONFIGURATION DIAGRAMS
Connector
symbol
F
F-01F-04F-05F-08F-19
F-27F-26F-25F-24F-23F-14
F-21
F-09
F-10
F-12
F-13
F-06
F-16
F-29
F-28
B-39
LUGGAGE COMPARTMENT
R.H. drive vehicles
F-01 (2) Spare connector
F-04 (2) Luggage compartment lamp
F-05 (2-B) High mounted stop lamp
F-06 (1-B) Defogger ( - )
F-08 (2) Spare connector
F-09 (6-B) Rear combination lamp (RH)
F-10 (1) Trunk lid latch switch
F-12 (2-GR) Licence plate lamp (RH)
F-13 (2-GR) Licence plate lamp (LH)
F-14 (2-GR) Floor wiring harness (LH) and bumper
wiring harness combinationF-16 (6-B) Rear combination lamp (LH)
F-19 (1) Defogger (+)
F-21 (2) Windshield washer motor
F-23 (2-B) Electric pump
F-24 (8-GR) Floor wiring harness (LH) and 4WD wiring
harness combination
F-25 (2-B) Direction valve (LH)
F-26 (2-B) Direction valve (RH)
F-27 (3-B) Proportioning valve (for ACD control)
F-28 (3-B) Proportioning valve (for AYC control)
F-29 (3-B) Pressure sensor

INDEX - In order of connector No.C-10
Wiring diagram
page Circuit diagram page Parts name Connector
No.
FF-08Spare connector (RH)>B-197B-38,39
F-09Rear combination lamp (RH)B-111,115,129,134,138,142,144,145B-38,39
F-10Trunk lid latch switchB-119,123B-38,39
F-12Licence plate lamp (RH)B-110,114B-38,39
F-13Licence plate lamp (LH)B-110,114B-38,39
F-14Floor wiring harness (LH) and bumper
wiring harness combinationB-110,114B-38,39
F-16Rear combination lamp (LH)B-110,114,126,134,138,143,144,145B-38,39
F-19Defogger (+)B-185B-38,39
F-21Windshield washer motorB-186,190B-38,39
F-23Electric pump B-216,224,234,244B-38,39
F-24Floor wiring harness (LH) and 4WD
wiring harness combination B-216,224,234,235,244,245B-38,39
F-25Direction valve (LH) B-235,245B-38,39
F-26Direction valve (RH) B-235,245B-38,39
F-27Proportioning valve (for ACD control)B-216,224,235,245B-38,39
F-28Proportioning valve (for AYC control)B-235,245B-38,39
F-29Pressure sensor B-216,224,234,244B-38,39

INDEX - In order of parts nameC-20
Wiring diagram
page Circuit diagram page Connector
No. Parts name
SSRS-ECUC-41B-249,251B-19,25
StarterB-18B-79B-11,15
StarterB-19B-79B-11,15
Steering wheel sensorC-230B-202,210,218,226,236,246B-23,29
Stop lamp switchC-103B-144,145,198,206,212,220,228,238B-20,26
TThrottle position sensorB-02B-89,97,215,223,231,241B-10,14
Trunk lid latch switchF-10B-119,123B-38,39
VVehicle speed sensorB-03B-92,100,150,154,197B-10,14
WWaste gate solenoid valveB-36B-91,99B-11,15
Wheel speed sensor (Front:LH)A-03B-203,211,217,225,233,243B-6,8
Wheel speed sensor (Front:RH)A-37B-203,211,217,225,233,243B-7,9
Wheel speed sensor (Rear:LH)
D-10B-203,211,217,225,233,243B-30,32
Wheel speed sensor (Rear:RH)
D-04B-203,211,217,225,233,243B-30,32
Windshield washer motorF-21B-186,190B-38,39
Windshield wiper motorB-01B-186,190B-10,14

REAR AXLE- Hydraulic Unit 27B-61
HYDRAULIC UNIT
REMOVAL AND INSTALLATION
Caution
(1) When connecting the return hose and suction hose, do not apply lubricant.
(2) No foreign matter should be allowed in the hydraulic piping and joints.
Pre-removal Operation
DTrunk Side Trim Removal (Refer to GROUP 52A.)
DHydraulic Piping Fluid DrainingPost-installation Operation
DHydraulic Piping Fluid Filling and Bleeding
(Refer to P.27B-17 and P.27B-19.)
DTrunk Side Trim Installation (Refer to GROUP 52A.)
12
7 6 4
8 9
10
311
34¶5Nm*1
24¶4Nm
12¶2Nm
26¶4Nm*
2
5
12¶2Nm
12¶2Nm
18¶2Nm 34¶5Nm*1
26¶4Nm*2
18¶2Nm12¶2Nm 34¶5Nm*
1
26¶4Nm*2
12¶2Nm
NOTE:
*1:Thread is not lubricated
*2:Thread is lubricated
Removal steps
1. Dust guard
2. Reservoir hose assembly and hy-
draulic unit connection
3. Hydraulic unit hose assembly and
hydraulic unit connection
4. Transfer connector assembly and
hydraulic unit connection
5. Hydraulic unit bracket assembly
mounting bolt
"BA6. Hydraulic unit assembly7. Hydraulic unit bracket
DStabilizer bar to differential support
arm connection (Refer to GROUP 34.)
DDifferential support arm (Refer to P.
27B-55.)
AA"8. Hydraulic unit hose assembly hicles with ACD+AYC>
9. Transfer connector assembly
"AA10. Reservoir hose assembly
11. Oil reserve