2007 Lancia Musa technical specifications

IDENTIFICATION DATA
You are advised to note the identification codes. The identification
data stamped and given on the plates and their position are the
following:
1 - Model plate
2 - Chassis marking
3 - Bodywork paint identification plate
4 - Engine marking.
MODEL PLATE
The plate is to be found on the front crossmember of the engine
compartment and bears the following identification data:
A - Manufacturer’ name.
B - Homologation number.
C - Vehicle type code.
D - Chassis number.
E - Maximum vehicle weight fully loaded.
F - Maximum vehicle weight fully loaded with trailer.
G - Maximum vehicle weight on front axle.
H - Maximum vehicle weight on rear axle.
I - Engine type.
L - Body version code.
M - Spare part code.
N - Smoke opacity index (for diesel engines).
319
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
L0D0225m
L0D0226m

CHASSIS MARKING
It is printed on the passenger compartment floor, near the right-hand
front seat.
It can be reached by lifting the special flap in the carpeting and
includes the following data:
❒car model;
❒chassis number.
BODYWORK PAINT
IDENTIFICATION PLATE
It is applied on front bonnet and shows following data:
A - Paint manufacturer.
B - Colour name.
C - Lancia colour code.
D - Respray and touch up code.
ENGINE MARKING
Engine marking is stamped on the cylinder block on passenger
compartment side and includes the model and the chassis number.
320
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
L0D0228m
L0D0227m

ENGINE CODES - BODYWORK VERSIONS
Versions
1.48V(◊)
1.416V
1.416VDual FuNction System
1.3 Multijet 70HP
1.3 Multijet 70 HP Dual FuNction System
1.3 Multijet 90HP
1.3 Multijet 90 HP Dual FuNction System
1.9 Multijet
(◊) Engine model provided for certain versions/markets only
(*) Version with DPF
321
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
Engine code
350A1000
843A1000
843A1000
188A9000
188A9000
199A3000
199A3000
188B2000Bodywork version code
350 AXF1A 08CL
350 AXA1B 07 CL
350 AXA11 04 CL
350 AXBIA 01 BL
350 AXB11 05 BL
350 AXG1A 09 NL (4-seat)
350 AXG1A 09 ML (5-seat)
350 AXG1A 09 TL (4-seat) (*)
350 AXG1A 09 SL (5-seat) (*)
350 AXG11 09 HL (4-seat)
350 AXG11 09 GL (5-seat)
350 AXG1A 02 GL

322
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
1.3 Multijet 70HP
188A9000
Diesel
4 in line
4
69.6 x 82
1248
18±0.4
51
70
4000
180
18.3
1750
–
Unleaded petrol
95 RON (EN228
Specifications)1.3 Multijet 90HP
199A3000
Diesel
4 in line
4
69.6 x 82
1248
17.6±0.4
66
90
4000
200
20
1750
–
Diesel fuel for
motor vehicles
(EN590
Specifications)1.9 Multijet
188B2000
Diesel
4 in line
2
82 x 90.4
1910
18±1
74
100
4000
260
26.4
2000
–
Diesel fuel for
motor vehicles
(EN590
Specifications) 1.4
8V◊)
350A1000
Otto
4 in line
2
72 x 84
1368
11±0.2
57
77
6000
115
11.7
3000
NGK ZKR7A-10
Unleaded petrol
95 RON (EN228
Specifications)1.4
16V
843A1000
Otto
4 in line
4
72 x 84
1368
11±0.2
70
95
5800
128
13
4500
NGK ZKR7A-10
Unleaded petrol
95 RON (EN228
Specifications)
ENGINE
GENERAL FEATURES
Engine code
Cycle
Number and layout of cylinders
Valves per cylinder
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio: rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio: rpm
Spark plugs
Fuel
◊) Engine model provided for certain versions/markets only

Modifications or repairs to the fuel system that are not carried out properly or do not take the
system’s technical specifications into account can cause malfunctions leading to the risk of fire.
(◊)Engine model provided for certain versions/markets only
1.48V(◊)-1.416V
Multipoint sequential phased electronic injection,
returnless system
TRANSMISSION
Gearbox
Clutch
Drive1.4
8V(◊)-1.3 Multijet -
1.9 Multijet
Five forward gears and reverse
with synchromesh for forward
gear engagement
Hydraulic control, self-adjust-
ing without travel-free pedal
Front
323
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
1.416VDual FuNction -
1.3 Multijet Dual FuNction
System
Five forward gears and reverse,
electrohydraulic system with elec-
tronic control
Electric-hydraulic device
with electronic control
Front1.416V
Five or six forward gears and
reverse with synchromesh for
forward gear engagement
Hydraulic control, self-adjust-
ing without travel-free pedal
Front
FUEL FEED/IGNITION
Fuel feed
1.3 Multijet - 1.9 Multijet
Direct injection with electronically controlled
Multijet “Common Rail” with turbosupercharger
and intercooler

1.3 Multijet 90HP - 1.9 Multijet
Disc, self-ventilating (287 mm x 22mm)
Drum type (228mm)
Controlled by hand lever, working
on rear brakes
324
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
BRAKES
Service brakes:
– front
– rear
Parking brake
IMPORTANT Water, ice and antifreeze salt on roads may deposit on the brake discs thus reducing braking efficiency at first braking. 1.4
8V(◊)-1.416V- 1.3 Multijet 70HP
Disc, self-ventilating (257 mm x 22mm)
Drum type (203 mm)
Controlled by hand lever, working
on rear brakes
SUSPENSIONS
Front
Rear1.4
8V(◊)-1.416V- 1.3 Multijet - 1.9 Multijet
Mc Pherson independent wheels
Interconnected wheels with twisting axle
STEERING
Type
Minimum steering
cycle m
(◊) Engine model provided for certain versions/markets only1.4
8V(◊)-1.416V- 1.3 Multijet - 1.9 Multijet
Rack and pinion with electric power steering
10.0

WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless tyres with radial carcass. The
homologated tyres are listed in the Log book.
IMPORTANT In the event of discrepancies between the information
provided on this “Owner handbook” and the “Log book”, consider
the specifications shown in the log book only.
Attaining to the prescribed size, to ensure safety of the car in
movement, it must be fitted with tyres of the same make and type on
all wheels.
IMPORTANT Do not use inner tubes with Tubeless tyres.
SPACE-SAVER SPARE WHEEL
Pressed steel rim. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim: 0 ±1 mm.
The values refer to the car in running order.
UNDERSTANDING TYRE MARKING
Example: 185/65 R 14 86 T
185 = Nominal width (S, distance between sidewalls in mm).
65 = Percentage height/width ratio (H/ S).
R = Radial tyre.
14 = Rim diameter in inches (Ø).
86 = Load rating.
T = Maximum speed rating.
325
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
L0D0229m

326
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
Load rating
60 = 250 kg 84 = 500 kg
61 = 257 kg 85 = 515 kg
62 = 265 kg 86 = 530 kg
63 = 272 kg 87 = 545 kg
64 = 280 kg 88 = 560 kg
65 = 290 kg 89 = 580 kg
66 = 300 kg 90 = 600 kg
67 = 307 kg 91 = 615 kg
68 = 315 kg 92 = 630 kg
69 = 325 kg 93 = 650 kg
70 = 335 kg 94 = 670 kg
71 = 345 kg 95 = 690 kg
72 = 355 kg 96 = 710 kg
73 = 365 kg 97 = 730 kg
74 = 375 kg 98 = 750 kg
75 = 387 kg 99 = 775 kg
76 = 400 kg 100 = 800 kg
77 = 412 kg 101 = 825 kg
78 = 425 kg 102 = 850 kg
79 = 437 kg 103 = 875 kg
80 = 450 kg 104 = 900 kg
81 = 462 kg 105 = 925 kg
82 = 475 kg 106 = 950 kg
83 = 487 kgMaximum speed rating
Q = up to 160 km/h.
R = up to 170 km/h.
S = up to 180 km/h.
T = up to 190 km/h.
U = up to 200 km/h.
H = up to 210 km/h.
V = up to 240 km/h.
W = up to 270 km/h.
Y = up to 300 km/h.UNDERSTANDING RIM
MARKING
Example: 6 J x 14 ET 40
6 = rim width in inches (1).
J = rim drop center outline
(side projection where
the tyre bead rests) (2).
15 = rim nominal diameter in
inches (corresponds to
diameter of the tyre to be
mounted) (3 = Ø).
ET = “hump” shape and
number (relief on the
circumference holding
the Tubeless tyre bead on
the rim).
40 = wheel camber angle
(distance between the
disc/rim supporting
plane and the wheel rim
centre line).