2007 FIAT IDEA fold seats

EXTENDING THE BOOT WITH SLIDING SEAT
Before extending the boot, release the seat belt buckle (with black
button, if fastened) and accompany the webbing in the reel to prevent it
from twisting; insert the tongues, overlapping them, in the retaining
system (A) inside the reel compartment.
Moving the seat backwards or forwards
The rear seat is of the double-seat type. It is possible to move the rear
seat backwards or forwards from the boot using handles (B) or (C); pull
the handle and at the same time move the seats forwards. This makes it
possible to extend the boot capacity.
To extend the boot totally
Proceed as follows:
❒remove the rear parcel and previously shown;
❒make sure the headrests are completely lowered;
❒use levers (D) and (E) to fold the rear seat backs on the cushions;
❒make sure the seats are completely in backward position by means of
handles (B) or (C);
❒use tapes (F) and (G) to tilt the seats completely.
IMPORTANT Tilting is only possible with rear seats positioned
completely backwards.
131
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0132m
F0H0109m
F0H0048m
Never pull tapes (B) or (C) with seats in
load position as they will slide vertically
thus hindering seat repositioning.WARNING

The tilted seats are fastened in this position by the action of the side
struts.
Partial extension
Operating the required part (right or left) of the seat in the same way it
is possible to obtain partial extension of the boot as illustrated.
IMPORTANT For rear seat complete tilting it could be necessary to
move the front seats forward.
To return the cushions on the floor
Use tapes (B) to return the cushions on the floor.
132
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
F0H0111m
F0H0112m
F0H0110m
With table folded seats, in the event of a
crash it can be dangerous to carry heavy
objects on the rear seat back.WARNING
WARNINGThe position of the rear seat backs folded
on the respective cushions shall not be
considered a loading position and
therefore cannot bear heavy weights.
If the central seat belt is fastened to the
seat, release it before tilting the seat.WARNING

173
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
SIDE AIR BAGS (where fitted)
(Side bag - Window bag)
SIDE BAGS
They are formed of an instantaneously-inflating cushion housed in the
back rest of front seats and their task is to increase protection of the
occupants in the event of a side crash of medium-high severity.
F0H0147m
WARNING
Do not cover the back rest of front seats
with trims or covers there are not set for
the use of side bags.
F0H0148m
Covers for Side bag seats are available at Lineaccessori Fiat.
WINDOW BAGS (where fitted)
They are “curtain” cushions located behind the side coverings of the roof
and covered by proper finishings, studied for the head protection to offer
the best protection to the front and rear occupants in the event of side
crash, thanks to the wide cushion inflation surface.
The side air bag is not a replacement of but complementary to the use of
belts, which should always be worn, as specified by law in Europe and
most non European countries.
IMPORTANT In the event of side crash, you can obtain the best
protection by the system keeping a correct position on the seat, allowing
thus a correct window bag unfolding.
IMPORTANT The front air bags and/or side bags may be deployed if the
car is subject to heavy knocks or accidents involving the underbody area,
such as for example violent shocks against steps, kerbs or low obstacles,
falling of the car in big holes or sags in the road.