2007.5 Citroen C4 PICASSO Owner's Manual

L
J
H
MR
O
M
K
O
RHJL
N
12345
50
II
H - Cancellation of the opera-
tion or return to the previ -
ous display
R - Selection of the type of in-
formation to be displayed
permanently (date, radio-
CD, trip computer) on the
right of the screen
Main Menu
Press on the button O to view the
«Main Menu» of the multifunction
screen.
This menu gives you access to
the following functions :
Trip computer
(See NaviDrive instructions)
Directory
(See NaviDrive instructions)
Telematics
(See NaviDrive instructions)
Configuration, for adjusting
various parameters (date,
time, units)
(See NaviDrive instructions)
Map
(See NaviDrive instructions)
Video
(See NaviDrive instructions)Navigation/guidance
(See NaviDrive instructions)
Audio
(See NaviDrive instructions)
It is recommended that the driver
should not manipulate the controls
described below while the vehicle
is in motion.
1 - Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
When the outside temperature is
between +3 °C and -3 °C, the dis-
play of temperature flashes (ice
risk).
Note: The outside temperature
displayed may be greater than the
actual temperature if the vehicle is
parked in bright sunlight.
Controls
O -
Access to the «Main Menu»
J or M - Scrolling in the screen
menus
L -
Validation and Selection in
the menus of the function
chosen or the value modified
M U LT I F U N C T I O N S C R E E N D T

II
51
Multifunction screen A
The trip computer gives you 5 types
of information accessible by succes-
sive presses on the control stalk.
• Range
• Instantaneous consumption
• Distance travelled
• Average consumption
• Average speed
To cancel the display of the trip
computer information, press a fifth
time.Multifunction screens C and
DT
The trip computer gives you ac-
cess to 3 types of instantaneous
information :
- Range
- Instantaneous consumption
- Distance remaining to be travelled
It also gives you access to 3 types
of information for two Journeys
1 and 2 :
- The distance travelled
- The average consumption
- The average speed
The Journeys
Journeys 1 and 2 are independent
of each other but identical in use.
For example they allow you to al-
locate journey 1 for daily calcula-
tions and journey 2 for monthly
calculations.
Setting a Journey to zero
When the relevant Journey is dis-
played, give a long press on the
end of the wiper control stalk.
To access display and selection
of the various types of informa-
tion, give short presses on the
end of the windscreen wiper con-
trol stalk.
For multifunction screen C and DT,
a press on the «Mode» button will
display the trip computer informa-
tion permanently.
To reset the trip computer infor-
mation to zero
, press continuously
for a few seconds on the end of the
control stalk when one of the types
of information is displayed.
T R I P C O M P U T E R

52
II
T R I P C O M P U T E R
Version for multifunction screen A Version for multifunction
screens C and DT
Range
This is the number of kilometres (or miles) that ca n still
be travelled on the fuel remaining in the tank.
When the distance remaining to be travelled is less
than 25 km (around 15 miles), only three dashes will
be displayed.
After a re-initialisation of the trip computer, the indica-
tion of range only becomes significant after a certain
length of time.
Average consumption
This is the relationship between the fuel consumed
and the distance travelled since the last time the tr ip
computer was reset to zero.
Instantaneous consumption
This is the result based on consumption recorded in

the last two seconds.This function only operates ab ove
30 km/h (approx. 20 mph).
Average speed
This is the result (since the last time the trip compute r
was reset to zero), from dividing the distance travelled
by the time taken (time with the ignition switched on).
Distance travelled
This is the number of kilometres (or miles) travelled
since the last time the trip computer was reset to
zero.
Distance remaining to be travelled
To enter this, see « Multifunction screens C and DT ».

II
53
Cruise control and
speed limiter Audio system

controls
Warning lamps for vehicle lamps and

direction indicators
Optional function
controls Multifunction display

controls
Horn
F I X E D C E N T R E D C O N T R O L S S T E E R I N G W H E E L

54
IICRUISE CONTROL AND SPEED
LIMITER AUDIO SYSTEM CONTROLS
Selection of cruise
control or speed
limiter Activation of the speed
limiter and Deactivation / Reactivation
of cruise control or
speed limiter Search of higher
frequencies Scrolling of pre-set
stations
Decrease of speed /
Activation
of cruise control Increase of
speed /
Activation
of cruise control Increase in
sound volume Decrease in
sound
volume Mute
See chapter on Radio or NaviDrive instructions
Selection of the parking space
function
F I X E D C E N T R E D C O N T R O L S S T E E R I N G W H E E L

II
55
OPTIONAL FUNCTION CONTROLSMULTIFUNCTION DISPLAY CONTROLS
Rheostat for
dashboard
lighting
(instrument
panel +
controls) Start of voice

recognition (see
chapter on Radio -
NaviDrive
instructions) Access to the
« Main menu » * Scrolling in the

multifunction
display
Pick-up /
hang-up
telephone
(see NaviDrive instructions) Personalisation button :
- Illumination / extinction of interior
lamp or
- Diagnosis or
- Personalisation of display of infor -
mation in the instrument panel or
- Choice of background colour for the instrument panel.
To view the personalisation menu
via this button, give it a long press. Selection of the type of

information to be
displayed on the right
of the screen (radio, trip
computer, navigation /
guidance, etc.) and
for multifunction screen A,
choice of activation/
deactivation of your
functions and adjustment
choices Cancellation of the

current operation or
return to the previous display
Air recirculation
Validation of the function chosen

or of the value modified
Pick-up / hang-up (see chapter on Radio)
* To comply with legisla -
tion in certain countries,
the «Menu» control may
be deactivated while the
vehicle is in motion.
Display of

« Directory »
menu
(see chapter on Radio)
F I X E D C E N T R E D C O N T R O L S S T E E R I N G W H E E L

56
II
Manual gearbox
1.
Check that you are in neutral.
2. Do not touch the accelerator.
3. For Diesel engines : turn the
key as far as position M. Wait
for the preheater warning lamp
to go off if this has come on.
4. Action the starter by turning
the key until the engine starts
(not more than ten seconds).
5. In ambient temperatures low-
er than 0°C, declutch during
the action on the starter to fa-
cilitate starting. Then remove
your foot slowly from the
clutch pedal.
NEVER RUN THE ENGINE IN A SPACE THAT IS ENCLOSED OR INSUFFICIENTL Y VENTILATED.
Electronic Gearbox System
(6-speed)
1.
Check that you are in position N.
2.
Press firmly on the brake pedal.
3. Do not touch the accelerator.
4. For Diesel engines : turn the key
as far as position M. Wait for
the preheater warning lamp to
go off if this has come on
.
5. Action the starter by turning
the key until the engine starts
(not more than ten seconds).
Note : After the vehicle has had a
prolonged stop or if the brake ped-
al has been applied several times
when stationary, it is necessary to
press the brake pedal fully down
in order to authorise starting of the
engine.
Advice
Vehicles equipped with a turbocharger
Never stop the engine without having allowed it to run f or a few seconds at idle, this being the time required for t he
turbocharger to return to a normal speed.
«Flicking the accelerator» at the moment of switching off the ignition could cause serious damage.
Note : If the engine fails to start at the first attempt, switch off the ignition. Wait ten seconds, then action the starter
again as indicated above. Automatic gearbox
1.
Check that you are in position
P or N.
2. Do not touch the accelerator.
3. For Diesel
engines : turn the
key as far as position M. Wait
for the preheater warning lamp
to go off if this has come on.
4. Action the starter by turning
the key until the engine starts
(not more than ten seconds).
Note : To exit from position P,
press on the brake pedal before
moving the selector.
S TA R T I N G T H E E N G I N E

II
57
5 speed gearbox
Reverse gear
Never engage reverse gear before the vehicle has come to a complete halt.
The movement should be made slowly in order to prevent snatching noises.
Note : With a manual gearbox :
- the cruise control is active from 4
th gear above speeds of 40 km/h (25 mph),
- the speed limiter is active above speeds of 30 km/h (19 mph).
M A N U A L G E A R B O X